Construction Features: • Heavy-duty angle base drilled for four (4) 1/2" bolts 9/16" mounting holes) • Stress-proof steel drum shaft • Frictionless bearings • Hydraulic motor coupled to gear box input shaft
Speeds: Recommended System Operation(12 GPM @ 1,500 psi) • 29 RPM: No load • 29 FPM: 500 lb Minimum System Operation (2 GPM @ 900 psi) • 5 RPM: No load • 5 FPM: 500 lb
Gear System: • 30:1 Gear Reduction • Hardened Steel worm gear runs in an oil bath and holds load in position when stopped
Note: Line speed is dependent on pump system and equipment operator. For best results, use the recommended pump and allow minimal rope slippage.
Duty Cycle: • 25% - 15 min/hr when operating at full load
Power: • 3 cu in high-torque rotary hydraulic motor • 1/2" - 14 NPTF hydraulic connections
Hoisting Rope: Consult us for type and size of rope. Maintain at least three wraps of rope on capstan drum when in use. Heavier loads may require four wraps of rope.
Construction Features: • Heavy-duty angle base drilled for four (4) 1/2" bolts 9/16" mounting holes) • Galvanized stress-proof steel drum shaft • Frictionless bearings • Hydraulic motor coupled to gear box input shaft
Speeds: Recommended System Operation (12 GPM @ 1,500 psi) • 29 RPM: No load • 29 FPM: Full load Minimum System Operation (2 GPM @ 900 psi) • 5 RPM: No load • 5 FPM: Full load
Gear System: • 30:1 Gear Reduction • Hardened Steel worm gear runs in an oil bath and holds load in position when stopped
Note: Line speed is dependent on pump system and equipment operator. For best results, use the recommended pump and allow minimal rope slippage.
Duty Cycle: • 25% - 15 min/hr when operating at full load
Power: • 2.8 cu in high-torque rotary hydraulic motor • 1/2" NPTF hydraulic connections
Hoisting Rope: Consult us for type and size of rope. Maintain at least three wraps of rope on capstan drum when in use. Heavier loads may require four wraps of rope.
Sturdy steel construction with mounting bolts for bolting adapter to winch frame. Comes complete with chain tightener for securing to pole. Allows same base-mounted unit to be used in either installation.
Bolts to the winch-hoist in order to mount the unit using a utility truck's 2" receiver hitch. The mounting plate is shipped with hardware, however the receiver hitch pin is not included.
Utility Hydraulic Capstan Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch, Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material handling equipment.
