Beam Clamp, Beam Clamps, Lifting Clamp, Lifting Clamps, Plate Clamp, Plate Clamps

Horizontal Plate Clamps

	Horizontal Grinder Clamp Type TTG


		Working Load Limit: 200 to 16,500 lbs

		TTG Clamps are designed to lift and transport structural steel beams in the horizontal position.

		Features:

		• Designed to lift and transport structural steel beams in the horizontal position • Fitted with a Camlok spring-operated safety lock and is operated by pulling the lock upwards • For short beams, a single clamp can be used. Long beams should be lifted using 2 clamps attached to opposite beam flanges • Maximum hardness of material to lift should not exceed 300 Brinell (32HRc)

Click the button of the item you wish to purchase.

TTG Horizontal Girder Clamp Prices

*Note: Not stocked.


Heavy Duty Horizontal Plate Clamps Type CH & HH (Pairs) Working Load Limit: 2,200 to 17,600 lbs		Back to Previous

	CH Clamps must be used in pairs and can be used on all types of materials in plate form, providing the plate can withstand the forces imposed. Standard CH clamps are supplied with smooth jaws.

	Features:

	• CH clamps are designed for loading process machines and to lift and transport sheet steel plates in the horizontal position • Can be designed to suit any load or plate thickness • Clamps are suitable for lifting one plate at a time, or bundles of plates provided the plates are the same width, have straight square sides, and are thicker than 10% of the maximum jaw capacity of the clamp • Clamps have smooth teeth so they can be used on all types of material • The smooth jaws can be replaced with serrated, hardened steel teeth and used on material up to 300 Brinell (32HRc) • Designed to be used with 2 legged slings • CH clamps should never be side loaded

Click the button of the item you wish to purchase.

CH Heavy Duty Horizontal Plate Clamp


Horizontal Plate Clamp with Lock Type THS		Back to Previous

	Working Load Limit: 90 to 9,900 lbs


	THS Plate Clamps can be used with single or two leg slings with a maximum angle of 60º. The clamps are designed to be used on structural steel plates up to a surface hardness of 300 Brinell (32HRc), providing the plate can withstand the forces imposed.

	Features:

	• Spring/lever-operated mechanism securely locks the clamp onto the horizontally positioned plate • Do not use to lift stainless steel, lead or copper • Can be used in single or 2 leg slings • Use lifting beams for longer plates • Clamp locks quickly onto the plate, enabling a single operator to set up the plate for lifting • Lifts and handles single sheet steel plates in the horizontal position • Useful for loading plates into guillotines, presses, punching machines and folding presses • Caution should be used so that maximum single angle of 60º is not exceeded

Click the button of the item you wish to purchase.

THS Horizontal with Locking Mechanism


	Horizontal Thin Sheet Clamps Type THK					Back to Previous

	Working Load Limit: 90 to 19,800 lbs

	THK Clamps have a jaw that pivots in the reverse direction to our normal horizontal clamps and are designed to lift and handle thin sheet plates that tend to sag when being lifted.

	Features:

	• Designed to lift and transport thin steel plates in the horizontal position • Reverse jaw feature ensures the grip of the clamp increases the more the plate deflects under its own self weight • Clamps are used in pairs with a two legged chain sling. Two pairs of clamps supported from a lifting beam must be used when handling long plates • Only lift one plate at a time

Click the button of the item you wish to purchase.

THK Horizontal Thin Sheet Clamp

*Note: Not stocked.

Horizontal Plate Clamps