Everything
you need for the Kwik Kit assembly is included in one box.
Railing Uprights are pre-assembled to save you even more time
and
eliminate parts guesswork.
A
Sturdy Yet Flexible Railing Package
Kwik
Kit safety railing kits allow you to create a sturdy railing
system
with no welding and the added advantage of safety yellow rails.
These
railing kits are quick to assemble using a hex key to tighten
the large, easy
to use set screws. Kwik Kit safety railing kits are prepackaged
with 6-foot
post spacing for straight sections, corner sections or extension
sections. By
using a combination of Straight, Corner, or Extension Kits,
almost any
basic railing requirement can be fulfilled. The rails may be
cut where
shorter sections are required. The kits may be secured using
bolts or
chemical anchors attached to the base fittings.
Pre-assembled
Uprights Save Even More Time
With
preassembled uprights, assembly
is intuitive. Elbows, crosses, and tees
are already pre-fitted to the uprights.
Assembly
is intuitive. Just place your horizontal rails into the pre-
positioned upright fittings and tighten the set screws. A convenient
hex
key set is provided with your kit to assist during the installation
process.
You can then determine your railing placement
and choose your
own method of anchoring the railing assembly. Once the railing
assembly is anchored, make any final adjustments needed. Upon
final inspection of the railing, it is recommended that all
of the
fitting set screws be tightened to a torque 29 lbs/ft.
Kwik
Kit™ Safety Railing Kit Benefits:
• Strong
and safe: they exceed OSHA and BOCA standards
• Attractive safety yellow powder coated pipe
• Easy to assemble using only a Hex Key
• Available in Aluminum or galvanized Iron/Steel
• 6-foot post spacing means lower system cost per
foot
• Standard Pipe Size: 1.90" OD
Toeboard
and Ground Socket
Toeboard
and Ground Socket Options Available
Type
69 meets OSHA requirements for toeboards. Stainless steel
hardware included. Easy to install with no drilling or welding.
Type 66 is a ground socket fitting designed for concrete
installations when uprights are required to be removable. It
incorporates a socket set screw fixing on top of the flange
and can
be supplied with a plug to fill the hole when the pipe is removed.
Kwik
Kit Railing Kit Installation Instructions
To
Install:
1. Insert the 39-3/4" (1010mm) upright cuts
into the base 62-8 fittings.
2. Insert the yellow 69" (1.75m) tubing into
the 15-8, 10-8, 25-8, and 26-8 fittings
3. Tighten set screws on the fittings to
29 ft/lbs with a standard hex tool
4. Kits are secured using bolts or chemical
anchors
To
Install: 1. The 39-3/4" (1010mm) upright cuts insert into
the base 62-8 fittings.
2. Insert the yellow 69" (1.75m) tubing into the
15-8, 10-8, 20-8, and 21-8 fittings
3. Tighten set screws on the fittings to 29 ft/lbs
with a standard hex tool
4 Kits are secured using bolts or chemical anchors
To
Install:
1. The 39-3/4" (1010mm) upright cuts insert into
the base 62-8 fittings.
2. Insert the yellow 69" (1.75m) tubing into the
25-8, and 26-8 fittings
3. Tighten set screws on the fittings to 29 ft/lbs
with a standard hex tool
4. Kits are secured using bolts or chemical anchors
Order Online
Click the button of the item you wish to purchase.
