• Utility Truck Installation • Overhead Line Crews • Tower and Antenna Erection • Transformer Replacement
NEW! BRAKE MOTOR! For Optimum Lift Control and Safety!
FEATURES
• Worm gear reduction for positive load holding • Portable and Rugged • 12 Volt DC or 115 Volt AC powered • 10' pendant hand or foot control • Capstan rope drum • Frictionless bearings • Full power reversible
FOOT SWITCH CONTROL Specify FS after unit number when ordering. Two-position pedal switch on a 10' cord. Available on 12 Volt and 115 Volt units in place of standard hand switch. Used where operators' hands must be free to help direct loads.
SPECIFICATIONS
Construction Features: • Heavy-duty angle base drilled for four (4) 1/2" bolts (9/16" mounting holes) with no welding required • Fully seated aluminum housings, with precision-cut gears, run in an oil bath • Stress-proof drum shaft • Frictionless bearings
Hoisting Rope: Contact us for type and size of rope. Maintain at least three wraps of rope on capstan drum when in use. Heavier loads may require four wraps of rope.
Model 300AB: • 286:1 • Hardened steel worm and forged bronze worm gear holds load in position when stopped
Model 30-12: • 175:1 • Hardened steel worm and forged bronze worm gear holds load in position when stopped
Duty Cycle: •25% - 15 min/hr when operating at full load
Shipping Weight: Models 300AB&30-12: 66 lbs
Power:
Model 30-12: • Reversible permanent magnet 12 Volt DC motor • 10 amp - No-load • 100 amp - Full-load Model 300AB: • Universal 18,500 RPM reversible 1.25 HP brake motor (no-load speed) • 15' cord plugs into any grounded 115 Volt AC outlet • 6 amp - No load • 20 amp - Full load
Factory-Installed Options:
Model 300AB: • Foot Switch • 230 Volt • Pole Mount • Swivel Mount • Variable Speed • Receiver Hitch Mount
Model 30-12: • Foot Switch • High Speed Gears • Pole Mount • Swivel Mount • Receiver Hitch Mount
FRONT VIEW
SIDE VIEW
TOP VIEW
Order Online
Click the button of the item you wish to purchase.
Sturdy steel construction with mounting bolts for bolting adapter to winch frame. Comes complete with chain tightener for securing to pole. Allows same base-mounted unit to be used in either installation.
Swivel mount bolts to your truck bed. Capstan winch frame bolts to swivel mount using tapped mounting holes. Winch rotation allows you to use your winch even when your truck is in and awkward location. Pin stop locks swivel base in one position.
Swivel Mount designed for installation with Model 30-12.
SIDE VIEW
RECEIVER HITCH MOUNT
Bolts to the winch-hoist in order to mount the unit using a utility truck's 2" receiver hitch. The mounting plate is shipped with hardware, however the receiver hitch pin is not included.
Utility Capstan Electric Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch, Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material handling equipment.
