•
Trifecta system 115 Volt brake motor
with triple brake system for instant
stopping
• Worm gear reduction for positive load
holding
• Rugged construction
• Low voltage 10' pendant control
• High-capacity cable drum
• Frictionless bearings
APPLICATIONS
•
Pull Rolling Loads up to 25,000 lbs.
• Multiple-Story Construction Site Work
• Long-Lift Applications
• Tower Erection and Maintenance
• Easily Portable From Job to Job
Construction
Features: • Heavy-duty angle base drilled for six (6) 1/2"
bolts
(9/16" mounting holes) with no welding required. • Fully sealed aluminum housings, with precision-cut
gears, run in an oil bath. • Stress-proof drum shaft. • Frictionless bearings.
Gear
System: • 286:1 total reduction • Hardened steel worm and forged bronze worm gear
 holds load in position when stopped.
Speeds: • 59 RPM: No-load drum speed • 30 FPM: No-load drum speed • 25 FPM: 500 lbs - single-line lift • 20 FPM: 1,000 lbs - single-line lift • 10 FPM: 2,000 lbs - double-line lift Note: All speeds are based on one layer
of cable on drum.
Power:
• Universal 18,500 RPM reversible 1.25 HP brake
motor (no-load speed) • 15' power cord plugs into any 115 Volt, AC
grounded outlet • 6 amp - No load. • 14 amp - Full load.
Duty
Cycle: • 25% - 15 min/hr when operating at full load
Lifting
Capacity: • 1,000 lbs - 1-2 layers of cable (39' of 1/4"
cable) • 850 lbs - 3 layers of cable (65' of 1/4"
cable) • 600 lbs - full drum of cable (250' of 1/4"
cable)
Drum
Storage: Model No. 100A Model
No. 150A
• 1/8" - 1,000 •
1/8" - 285' • 3/16" - 450' •
3/16" - 125' • 1/4" - 250' •
1/4" - 70' • 5/16" - 150' •
5/16" - 45'
For best results, use the minimum amount of cable
required for application. Maintain four wraps of
cable on the drum at all times. Cable sold separately.
Length and size must be specified at time of order.
Pulling
Capacity:
• 10% (6°): 8,000 lbs •
60% (31°): 1,500 lbs • 20% (11°): 4,000 lbs •
80% (39°): 1,300 lbs • 40% (22°): 2,100 lbs •
100% (45°): 1,100 lbs
Winch-hoists are rated for what they will vertically
lift. Above data is based on the total load that may
be pulled, single line, up a given incline. All
capacities are reduced 20% to allow for minimum
friction in pull.
Cable
Strength: • Safe working load is 20% of breaking strength. • Top-quality galvanized cable available in the
following breaking strengths:
1/8" - 2,000 lbs 1/4"
- 7,000 lbs
3/16" - 4,200 lbs 5/16"
- 9,800 lbs
Standard Electric
Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches,
Powered Winches, Power Winch,
Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist,
and Winches from your source for material handling
equipment.
