•
3,000 lb. single-line or 6,000 lb. double-line lift
• Trifecta system 115 volt brake motor with triple
brake system for instant stopping
• Worm gear reduction for positive load holding
• Dynamic braking for instant stopping
• Compact, heavy-duty construction
• Low voltage 10 ft pendant control
• Cable tensioner for better cable tracking
APPLICATIONS
All
winches and hoists are designed for material
handling usage only. • Heavy-duty Lifting
• Ideal for In-Plant Use
• Moving Equipment
• Lifting Motors and Heavy Apparatus
• Installation of Elevator Equipment
NEW!
BRAKE MOTOR!
For Optimum Lift Control
and Safety!
Construction
Features: • Heavy-duty base drilled for six (6) 1/2"
bolts (9/16"
mounting holes) with no welding required. • Fully sealed aluminum housings, with precision-cut
gears, run in an oil bath. • First reduction combines spur gears with hardened
steel worm and forged bronze worm gear system.
Holds load in position when stopped.
• Second reduction uses hardened heavy-duty spur gears
• Gear guard encloses external gear reduction • Frictionless bearing • 1430:1 double reduction
Speeds: • 11 RPM: No-load drum speed • 11 FPM: No-load drum speed • 9 RPM: 1,000 lbs - single-line lift • 7:25 FPM: 3,000 lbs - single- line lift • 3.5 FPM: 6,000 lbs - double-line lift
Note: All speeds are based on one layer of
cable on drum.
Drum
Storage: • 1/4" - 250' • 5/16" - 160' • 3/8" - 110'
For best results, use the minimum amount of cable
required for application. Maintain four wraps of
cable on the drum at all times. Cable sold separately.
Length and size must be specified at time of order.
Power:
• Universal 18,500 RPM reversible
1.25 HP motor brake (no-load speed) • 15' power cord plugs into any 115 Volt, AC,
grounded outlet. • 6 amp - No load • 14 amp - Full load
Pulling
Capacity: • 10% (6°): 24,000 lbs • 60% (31°):
4,600 lb • 20% (11°): 12,200 lbs • 80% (39°):
3,800 LB • 40% (22°): 6,400 lbs • 100% (451°):
3,300 LB
Winch-hoists are rated for what they will vertically
lift.
Above data is based on the total load that may be pulled,
single line, up a given incline. All capacities are reduced
20% to allow for minimum friction in pull
Duty
Cycle: • 25% - 15 min/hr when operating at full load
Lifting
Capacity: • 3,000 lbs - 1-2 layers of cable (54' of 5/16"
cable) • 2,650 lbs - 3 layers of cable (100' of 5/16"
cable) • 2,150 lbs - full drum of cable (160' of 5/16"
cable)
Shipping
Weight:
132 lbs
Factory-Installed
Options: • 230 Volt • Clutch • Upside-Down Mounting • Model DC48 (12V DC Power) • Divided Drum
Cable
Strength: • 5-1 recommended safety factor • Top-quality galvanized cable available in the
following breaking strengths:
1/4" - 7,000 lbs
5/16" - 9,800 lbs
3/8" - 14,400 lbs
FRONT
VIEW
SIDE
VIEW
TOP
VIEW
I-Beam Electric
Winch-Hoist, Electric Wire Rope Hoists, Wire Rope Hoist, Electric
Hoist, Trolleys, Hoists, Winch
Hoist, Winches, Electric Powered Winches, Monorail Hoist,
Hoist Winches, and My-te from your source for material
handling equipment.
