CHAMPION POLYSTEEL TABLES

These are the most durable and stable picnic table frame on the market and a table that is tough to tip over. The
Champion style is a time-tested winner and our most popular picnic table. These outdoor tables boast a walk-through
design for comfortable dining and a wide base for stability. Our heavy-duty, commercial quality picnic tables are
completely coated with a 1/8+ inch layer or plastisol (PVC), including the legs and support braces, for a durable and
attractive addition to any location. They are built to last a lifetime in all climates! Polysteel Champion style picnic tables
are comfortable, very easy to clean, and look great for years! We are so certain of this that we offer a 15 Year Best-
in-Industry Warranty!

Specifications for Rectangle and Oval Picnic Table
Table Top and Seat: HR steel ¾" #9 standard expanded metal or 14 gauge perforated steel. Seat measures 10"
across for Champion and Northwoods styles and 12" across for Classic style. Attached perimeter frame and supporting
structure is made from HR steel. A 2" schedule 40 pipe is welded in the center of top. When coated will accept a
1.625" diameter umbrella pole (except 10’ and single ped direct bury).
Free Standing Legs: Completely sealed pipe size tubing that measures 1.90" OD (Polyped 2.375" OD pipe) prior to
plastisol (PVC) coating. Leg diagonal brace is made of pipe size tubing that measures 1.05" OD prior to plastisol
(PVC) coating.
Direct Bury Double Pedestal stand vertical posts are made of 4" pipe size tubing, arms are made of 3" pipe size
tubing. Bottom of post is sealed and has horizontal 1/2" rebar extensions for securing in concrete.
Surface Mount has same pipe tubing as direct bury. Bottom of each surface mount post has a base plate of HR steel
measuring 8" dia. x1/2". All above are plastisol coated with UV and fungus resistant oven cured plastisol to a thickness
of approximately 1/8". All Hardware is .304 stainless steel. Pipe has no holes to allow access by bees or other
insects.

Specifications for Square and Round Picnic Table (including Kid’s Square and Rectangle Free Standing Table)
Top and Seat: HR steel ¾" #9 standard expanded metal or 14 gauge perforated steel. Seat measures 10" across.
Attached perimeter frame and supporting structure is made from HR steel. A 2" schedule 40 pipe is welded in the
center of top. When coated will accept a 1.625" diameter umbrella pole (free standing only).
Free Standing Legs: Completely sealed pipe size tubing that measures 1.66" OD prior to plastisol (PVC) coating.
X Brace is HR steel.
Direct Bury Center Post: 6" square tube; Top of pipe is sealed. Bottom of pipe is sealed and has horizontal .5" rebar
extensions for securing in concrete. Seat and Top supports are made of 2" square tubing. The 2" tube is plastisol
coated to approximately 2-3/8" OD. Seat arms are made of 4" OD square tubing. No umbrella hole on Direct Bury.
Multi Ped Direct Bury Table post is made of 4" pipe size tubing, Seat Post is made of 3" pipe size tubing. Bottom
of post is sealed and has horizontal 1/2" rebar extensions for securing in concrete. All above are plastisol coated with
UV and fungus resistant oven cured plastisol to a thickness of approximately 1/8". All hardware is .304 stainless steel.
Pipe has no holes to allow access by bees or other insects.

Specifications for Square and Rectangle Kid’s Picnic Table
Top and Seat: HR steel ¾" #9 standard expanded metal or 14 gauge perforated steel. Seat measures 10" across.
Attached perimeter frame and supporting structure is made from HR steel. A 2" schedule 40 pipe is welded in the
center of top. When coated will accept a 1.625" diameter umbrella pole (free standing only).
Free Standing Legs: Completely sealed pipe size tubing that measures 1.66" OD prior to plastisol (PVC) coating.
X Brace (on square kid’s table only) is HR steel.
Pipe has no holes to allow access by bees or other insects.

Specifications for Plastisol (PVC) Poly-Vinyl Chloride Coating
Material: Plastisol (PVC) shall have:
Antimicrobial (non-leaching) to help prevent microbiological attack on the plastisol (PVC) surface that can
cause the loss of aesthetic appearance, mildew odors, embrittlement and premature product failure.
Testing Data available Per ASTM G21-90.
Tensile strength of no less than 1800 psi per ASTM D412.
Elongation of no less than 200% per ASTM D412
Tear strength of no less than 300lb/in per ASTM D624.
Hardness of 90 ± 5 (Durometer, Shore A (Instant)) per ASTM D2240.
Flammability – Pass per FMVSS 302
UV stabilized – guaranteed to not show significant fading for 5 years per written warranty
Process: Prior to plastisol coating, each part shall be chemically washed, dried, heated and coated in a heat
activated primer and dried. After drying, each part shall be pre-heated in a convection oven to a temperature
of no less than 400° F, dipped into liquid Plastisol (PVC) and cured in a convection oven at a temperature
no less than 350° F. All parts shall have a coating thickness of .125"-.25".

Polysteel products are completely plastisol coated (frames and legs included) with a thick, UV stabilized, mold and
mildew resistant plastisol coating which is compliant with worldwide standards. Polysteel is committed to being an
environmentally conscious company and recognizes the importance of being committed to continually finding ways
to support our environment.

Champion Polysteel Tables, Plastisol Coated, 1.9" OD Tubing, Coating of UV and Fungicide Protected Plastisol,
Walk-Through Design for Comfortable Seating, Wide Base, Classic, Champion, and Northwoods from your source
for material handling equipment.