•
LIFT - EMPTY: up to 40 fpm •LIFT - LOADED:
up to 35 fpm with 3000 lb load
•LOWERING - EMPTY: up to 29 fpm •LOWERING - LOADED:
up to 57 fpm with 3000 lb load
TIRES
/ WHEELS
• DRIVE: 9" x 3" polyurethane
• DUAL LOAD: (2) 4" x 2.9" polyurethane
HYDRAULICS
• Lift cylinder with hard
chrome-plated rods
• Pump unit including motor,
gear pump, solenoid,
and pressure compensated lowering valves
TRANSMISSION
• Vertically mounted drive
motor direct mounted to
gear housing
• Oil-bathed ZF GK10 hypoid
bevel gear drivetrain
• State-of-the-art optimized
gear technology provides
minimal envelope circle, zero maintenance, and
low
noise level
ELECTRICAL
• 24-volt ZAPI AC-0 inverter
with matching drive
motor provides high performance throughout the
entire speed range
• Separately fused power control
circuits
• Quick disconnect EPD power
cutoff
• Hour meter / battery discharge
indicator combo
• Power configurations and
diagnostic features are displayed
with a ZAPI handheld console
• Lower battery interrupt
• Travel speed remains constant
relative to throttle position,
regardless of load
FRAME
AND MAST
• Bolt-on high-visibility
mast, I-beam construction
and lift cylinders positioned on the outer I-beam
for best view through mast
• 4" wide adjustable
straddle legs
• Straddle leg inside dimension
(ID) can be set at
42" to 50" in 4" increments; 42"
to 50" with the
triple stage mast.
• Class II ITA fork carriage
with 36" tall load backrest
• Forks are adjustable from
8" ID to 31" OD
• Dual lift chains
BRAKES
• Regenerative electromagnetic
brake mounted on
motor armature shaft, multiplying braking power
through the transmission
• Brake is applied when control
arm is in the vertical
or horizontal handle position
• Neutral braking resists
rollback on ramps
BEARINGS
• DRIVE
WHEEL: tapered roller bearings sealed
in oil bath
• LOAD
WHEELS: sealed in ball bearings
OPERATION
/ CONTROLS
• Ergonomic operator handle
with travel, lift, and lower
functions
• Angle grips allow easy operation
with either hand
• Wrap-around guard
• Reversing switch
• Thumb control and horn
• Top mounted tiller arm offers
excellent operator
comfort and minimum steering effort
• Gas-assisted spring handle
• Creep speed function with
steer handle at 5° back-
tilt from vertical
ACCESSIBILITY
• Removal of two piece power
head cover exposes
major components for inspection and maintenance
Note:
Aisle dimensions listed above assume the bay
width to be straddled OD plus 2" (1" on either side
of
straddle leg). Straddle OD is the load width plus 8".
*For metric conversion multiply inches by 25.4.
Model#
Mast
Lift
Ht.
Col.
Ht.
Free
Lift
Ext
Ht.
w/LBR
²Adj.
Straddle Leg
(4" Incr.)
³Wt.
Chassis Only
A
C
D
E
ID
OD
F
G
3000
lb Capacity @ 24" Load Center ITA Class II Fork
Carriage
•
24-volt ZAPI travel controller
• AC drive motor
• 224 AH battery package (4-6 AGM volt maintenance-free
batteries), complete with
automatic 25 AMP / 110 VAC plug-in internal charger
• Battery discharge indicator (BDI), hour meter (HM), combo
gauge, key switch
• Battery compartment size: "A" compartment-26.4"
x 9.1" x open
• Fork size: 42" x 4" x 1.5"
• 1 – 9" x 3" press-on polyurethane drive
tire
• 2 – 4" x 2.9" polyurethane dual load wheels
• I-beam mast construction
• Ergonomic fingertip control handle with wrap-around hand
guard, thumb control
travel function, belly button reversing switch
and horn, lift and lower buttons
• Creep speed control
• Adjustable straddle legs: 42" to 50" ID in
4" increments
• 4" wide straddle leg; straddle leg OD is ID plus
6"
• Class II ITA fork carriage 16.25" x 32", 36"
LBR
Order Online
Click the button of the item you wish to purchase.
