Short
turning radius makes it an excellent
choice for narrow aisles, tool rooms or street
level loading.
CAPACITY
• 4000 lb at 24" load center BATTERY
• Minimum battery* weight: 1090 lb
• Compartment dimensions (open): 31.6" x 13.1"
• Connector: Anderson 175 Gray—A-11
SPEED
• EMPTY: 0 - 3.4 mph
• LOADED: 0 - 3.1 mph
• LIFT - EMPTY: up to 37 fpm
• LIFT - LOADED: up to 32 fpm with 4000 lb load
• LOWERING - EMPTY: up to 29 fpm
• LOWERING - LOADED: up to 56 fpm with
4000 lb load
TIRES
/ WHEELS
• DRIVE: 9" x 3" polyurethane
• DUAL LOAD: (2) 4" x 2.9" polyurethane
OPERATION
/ CONTROLS
• Ergonomic operator handle with travel, lift, and lower
functions
• Angle grips allow easy operation with either hand
• Wrap-around guard
• Reversing switch
• Thumb control
• Key switch and horn
• Top mounted tiller arm offers excellent operator
comfort and minimum steering effort
• Gas-assisted spring handle
• Creep speed handle control
HYDRAULICS
• Lift cylinder has hard chrome-plated rods
• Pump unit including motor, solenoid, gear pump,
and pressure compensated lowering valves
ELECTRICAL
• 24-volt ZAPI AC-0 inverter with matching drive motor
provides high performance throughout the entire
speed
range
• Separately fused power control circuits
• Quick disconnect EPD power cut off
• Hour meter / battery discharge indicator combo
• Power configurations and diagnostic features are
displayed with a ZAPI handheld console
• Low battery interrupt
• Travel speed remains constant relative to throttle
position, regardless of load
TRANSMISSION
• Vertically mounted drive motor direct mounted to
gear housing
• Oil-bathed ZF GK10 hypoid bevel gear drivetrain
• State-of-the-art optimized gear technology provides
minimal envelope circle, zero maintenance, and
low
noise level
BRAKES
• Regenerative electromagnetic brake mounted on motor
armature shaft, multiplying braking power through
the
transmission
• Brake is applied when control arm is in the vertical
or horizontal position
• Neutral braking resists rollback on ramps
FRAME
AND MAST
• Bolt-on high-visibility mast, I-beam construction and
lift cylinders positioned on outer I-beam for best
view
through mast
• Dual lifting chains
• Fixed straddle leg inside dimension (ID) of either
42" or 50"
• 4" wide straddle legs = ID + 8"
• Class II ITA fork carriage with 36" tall load back
rest
• Forks are adjustable from 8" ID to 31" OD
ACCESSIBILITY
• Removal of two piece power head cover
exposes major components for inspection
and maintenance
For
ease of use add 8" to aisle dimension listed.
If sideshift option is used add 2".
Note:
Aisle dimensions listed above assume the
minimum bay width to be straddle OD plus 5" (2.5"
on each either side of straddle leg). Straddle OD is
the load width plus 10". Truck performance may vary
due to application requirements and changes in model
design.
Model#
Mast
Lift
Ht.
Col.
Ht.
Free
Lift
Ext
Ht.
w/LBR
²Adj.
Straddle Leg
(4" Incr.)
³Wt.
Chassis Only
A
C
D
E
ID
OD
F
G
4000
lb Capacity @ 24" Load Center ITA Class II Fork
Carriage
•
24-volt ZAPI travel controller
• AC drive motor
• Battery discharge indicator (BDI), hour meter (HM), combo
gauge, key switch
• Battery compartment size: 31.6" x 13.1" x open
• Fork size: 42" x 4" x 1.5"
Adjustable from 8" to 30" O.D.
• 1 – 9" x 3" press-on polyurethane drive
tire
• 2 – 4" x 2.9" polyurethane dual load wheels
• I-beam mast construction
• Ergonomic fingertip control handle with wrap-around hand
guard, thumb control, travel
function, belly button reversing switch and horn,
lift and lower buttons
• Creep speed control
• Fixed straddle legs – Inside dimensions are either
42" or 50" I.D.
4" wide straddle legs =I.D. plus 8"
• Class II ITA fork carriage, 36" LBR
NOTE:
Battery and charger NOT included.
Order Online
Click the button of the item you wish to purchase.
