Stainless Steel 19S4 1 3/16 in. Center to Center of Bearing Bars
STEEL BAR GRATING
STAINLESS STEEL GRATING
When caustic atmospheres are encountered, or when corrosion resistance and/or minimum carbide precipitation are essential considerations, stainless steel grating is the answer. The longer lasting capabilities of stainless steel under these special conditions make it an economical selection over the long term.
Shot blasting or wire brushing should be avoided since these operations can cause iron contamination which, if not removed, will cause rusting and discoloration of the surface. Such contamination can be removed by passivation. Electro-polishing leaves a passive surface. The swage-locked and presslocked processes will not show discoloration due to welding.
It is ideal for use in food processing areas, breweries, bottling plants, dairies and meat packing plants. Stainless steel can also be used in power plants, sewage treatment plants, pumping stations and hydrocarbon processing facilities where various caustic environments are normal. It also has application in shipboard and building industries where saline solutions or atmospheres are present.
Unless otherwise specified, stainless steel grating shall have a mill finish as fabricated. "As fabricated" means as fabricated in our shop without a subsequent finishing operation. Stainless steel will show some discoloration around the joints due to welding Finishes available to remove discoloration include sand blasting and electro-polishing, the latter being used where bright finish is desired.
CHEMICAL COMPOSITION
Type 304 alloys resist most oxidizing acids and can withstand all ordinary rusting. They are immune to foodstuffs, sterilizing solutions most of the organic chemicals and dyestuffs, and a wide variety of inorganic chemicals. This grade should be considered for use unless some special mechanical, physical or fabricating characteristic is required.
Alloy
Carbon (max. %)
Manganese (max. %)
Silicon (max. %)
Chromium (%range)
Phosphorus (max. %)
Sulfur (max %)
Nickel (% range)
Nitrogen (max. %)
304
0.08
2.0
0.75
18-20
0.045
0.030
8-10.5
0.10
Order Online
Click the button of the item you wish to purchase.
Note: For gratings with other than 1-3/16" bearing bar spacing, proportionate conversion factors apply.
19S PANEL WIDTH (inches) Note: S-Stainless Welded cross rods may extend 1/8" each side. Panel widths do not include these extensions.
No. of Bars
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1/8" Bar
1 5/16
2 1/2
3 11/16
4 7/8
6 1/16
7 1/4
8 7/16
9 5/8
10 13/16
12
13 3/16
14 3/8
15 9/16
16 3/4
17 15/16
3/16" Bar
1 3/8
2 9/16
3 3/4
4 15/16
6 1/8
7 5/16
8 1/2
9 11/16
10 7/8
12 1/16
13 1/4
14 7/16
15 5/8
16 13/16
18
No. of Bars
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
1/8" Bar
19 1/8
20 5/16
21 1/2
22 11/16
23 7/8
25 1/16
26 1/4
27 7/16
28 5/8
29 13/16
31
32 3/16
33 3/8
34 9/16
35 3/4
3/16" Bar
19 3/16
20 3/8
21 9/16
22 3/4
23 15/16
25 1/8
26 5/16
27 1/2
28 11/16
29 7/8
31 1/16
32 1/4
33 7/16
34 5/8
35 13/16
Steel Bar Grating, Stainless Steel Grating, Floor Grating, Corrosion Resistance, Bar Grating Clip, and 19W4-304SS from your complete source for material handling equipment.
Hold grating sections securely in place