• Vinyl diamond-plate
or smooth surfaces drain static electricity
from personnel
• Protect sensitive equipment from damage or eliminate
static
annoyance
• Nitricell® sponge base delivers 2X the resilience
and 3X the
life of typical sponges
• Lay-flat design and up to 20% more standing area than
look-a
likes
• Attached grounding snap
Specs:
Uses
Areas at risk for damage from static electricity
Compound
Smooth
Diamond-Plate
Conductive
vinyl surface
bonded to a Nitricell®
sponge
Conductive
vinyl surface
bonded to a Nitricell®
sponge
Edges
Smooth
Diamond-Plate
Safety
Beveled
Safety
Beveled
EOS/ESD
S7.1
Smooth
Diamond-Plate
RTT
- 1 x 106 ohm
RTT
- 1 x 106 ohm
RTG
- 1 x 106 ohm
RTG
- 1 x 106 ohm
Resistance
Top to Top / Resistance to Ground
Coefficient
of Friction
NOTE:
Mat must be grounded with a ground cord; workers
must wear Heel Grounder or shoes with conductive soles.
Smooth
- .68 Dry per ASTM F1677
Diamond-Plate
- .68 Dry per ASTM F1677
Color
Black (BK)
Compression
Deflection
Smooth
- Deflection @35 psi, mm=8.43 per ASTM D575
Grounding
snap is attached to lower
left hand corner of each mat. See bottom
of page for accessories.
Diamond-Plate
- Deflection @35 psi, mm=8.43 per ASTM D575
Tabor
Abrasion
Smooth
-.025 lost @1,000 cycles per Fed. Std. 191
Diamond-Plate
- .1 Gram lost @1,000 cycles per Fed. Std. 191
Flammability
(Surface)
Flammability
(Sponge)
Smooth
-"A" Rating per MVSS 302
Smooth
-Burned for <5 seconds per MIL-P12420C
Diamond-Plate
- "A" Rating per MVSS 302
Diamond-Plate
- Burned for <5 seconds per MIL-P12420C
Order Online
Click the button of the item you wish to purchase.
The
Electrically Conductive Runner is ideal in areas where static
prevention
is a priority. Use in aisles and other heavy-use areas.
• Treated surface drains static electricity from personnel
• Protect sensitive equipment or eliminate static annoyance
• Attached grounding snap
Specs:
Uses
Areas at risk for damage from static electricity
Grounding
snap is attached to lower left hand corner of each mat. See
bottom of page under accessories.
ACCESSORIES
15’
Ground Cord No. 793.15Cord
Use
the cord to connect all ESD tabletop and floors mats to a building
ground. The solderless terminal can be connected to an electrical
outlet
using the screw in the outlet cover.
Specs:
Uses
To connect all ESD mats to a building ground
Construction
Molded-in male snap fastener on one end and solderless
terminal on the other.
Resistivity
Integral one megohm resistor (1 x 106 ohm)
Snap
Conforms to 10mm snaps
Order Online
Click the button of the item you wish to purchase.
Made
for workers wearing insulative shoes, the Heel Grounder
allows static electricity to pass from the worker to the ESD
matting
or flooring One size "fits all" and the Velcro®
loop allows for easy
attachment. Allow the fabric strip to touch the workers skin
for best
performance.
Specs:
Uses
To allow shoes to conduct static discharge
Construction
Two-layer laminated rubber sole with Velcro® loop
attachment
Resistivity
One megohm resistor (1 x 106 ohm)
Width
1.5"
Thickness
0.060"
Order Online
Click the button of the item you wish to purchase.
Anti Fatigue
Matting, Conductive Mats, Conductive Matting, Antifatigue
Esd Mat, Commercial Matting, Diamond
Plate Matting, Esd Matting, Industrial Mats, and Industrial
Matting from your source for material handling equipment.
