TCK Air Hoist Hook, Motorized, Push, and Geared Trolley Suspensions (3 - 6 Ton)
TCK Air Powered Hoists with Pendant and Cord Controls and Hook Suspension
TCK air powered air hoists are the best choice for low headroom and fast lifting requirements in demanding industrial settings. These hoists are extremely durable, are packed with top quality features and will far exceed workplace demands.
Features and Benefits
Standard Hoist Specifications
Unlimited Duty Cycle For continuous operation Spring-Loaded Multi-Vane Motor Design Permits very fine feathering control Cast Iron Housing For strength and durability Powder Coated Finish Proven weather resistant in harsh environments Internal Disc Brake Protected from harsh environments Extremely Fast Lifting For applications where speed is critical Low Noise Levels Adds to operator comfort Overload Limiter Adjustable load limiter detects over- load automatically and blocks air flow for lifting Nickel-Plated Load Chain Resistant to corrosion, abrasion and wear
Capacity Range 3 – 6 Ton Standard Lift 10' (longer lifts available) Standard Pendant or Cord Length Hangs approximately 4 ft. above the hoist’s fully extended bottom hook (longer lengths available) Air Supply Requirement 60 – 90 psi Air Filtration Maximum 5 micron air filter or finer required Air Inlet Port 1" NPT Air Supply Hose Minimum Size 3/4" Air Lubrication Requirement Minimum 10 – 15 drops of oil per minute (0.2 – 0.3 cc/min.) Temperature Range +14° – 140°F Chain Containers Optional Canvas or Steel
TCK3000P
TCK SERIES PENDANT MODEL—SPECIFICATIONS
Cap. (Tons)
Product Code
Std. Lift (ft.)
Push Button Hose L (ft)
Up/Down Speeds (ft/min @ 90 psi)
Up/Down Air Consumption Rates (cubic ft/min @ 90 psi)
Load Chain Dia. x Chain Fall Lines
Net Wgt. (lbs)
Wgt. For Add One Foot of Lift (lbs)
No Load
Full Load
No Load
Ful Load
3
TCK3000P
10
8.6
37/23
18/38
148/141
124/152
12.5x1
225
2.3
6
TCK6000P2
10
8.6
18/12
9/19
148/141
124/152
12.5x2
295
4.6
PENDANT MODEL—DIMENSIONS
Cap. (Tons)
Product Code
Headroom C (in)
a (in)
b (in)
d (in)
e (in)
g (in)
h (in)
i (in)
j (in)
3
TCK3000P
21.1
22.7
12.3
10.4
12.2
1.3
7.4
4.9
1.3
6
TCK6000P2
30.3
22.7
14.6
10.4
12.2
1.7
9.6
5.0
3.5
CORD MODEL—SPECIFICATIONS
Cap. (Tons)
Product Code
Std. Lift (ft.)
Cord L (ft)
Up/Down Speeds (ft/min @ 90 psi)
Up/Down Air Consumption Rates (cubic ft/min @ 90 psi)
Load Chain Dia. x Chain Fall Lines
Net Wgt. (lbs)
Wgt. For Add One Foot of Lift (lbs)
No Load
Full Load
No Load
Ful Load
3
TCK3000C
10
7.3
37 / 23
18 / 38
148 / 141
124 / 152
12.5 x 1
223
2.3
6
TCK6000C2
10
7.3
18 / 12
9/19
148 / 141
124 / 152
12.5 x 2
293
4.6
CORD MODEL—DIMENSIONS
Cap. (Tons)
Product Code
Headroom C (in)
a (in)
b (in)
d (in)
e (in)
g (in)
h (in)
i (in)
j (in)
3
TCK3000C
21.1
22.7
12.3
10.4
12.2
1.3
7.4
4.9
1.3
6
TCK6000C2
30.3
22.7
14.6
10.4
12.2
1.7
9.6
5
3.5
Order Online
Click the button of the item you wish to purchase.
(Kit includes the filter and regulator. For components to mount to the hoist, consult us)
TCK Air Powered Hoists with Air Powered Trolley
TCK air powered hoists can be used with our air powered trolleys for added mobility. The MCR air powered trolley is the ideal choice for transporting medium to heavy loads in construction and foundry applications.
Features and Benefits
Standard Hoist Specifications
Unlimited Duty Cycle For continuous operation Spring-Loaded Multi-Vane Motor Design Permits very fine feathering control Cast Iron Housing For strength and durability Powder Coated Finish Proven weather resistant in harsh environments Internal Disc Brake Protected from harsh environments Drop Stops & Rubber Bumpers To ensure safe operation Side Guide Rollers Provide additional stability and smooth travel Versatile Wheels Fit flat or tapered beam flange Trolley Muffler Produces low noise levels Nickel-Plated Load Chain Resistant to corrosion, abrasion and wear
Capacity Range 3 – 6 Ton Control Option on Trolley/Hoist TCKM—Pendant control only Standard Pendant Length Hangs approximately 4 ft. above the hoist’s fully extended bottom hook (longer lengths available) Air Supply Requirement 53 cfm at 60 – 90 psi Air Filtration Maximum 5 micron air filter or finer required Air Inlet Port 3/4" NPT Air Supply Hose Minimum Size 3 – 6 Tons —3/4" Air Lubrication Requirement Minimum 10 – 15 drops of oil per minute (0.2 – 0.3 cc/min.) Operating Conditions Temperature range +14° to 140°F Humidity 85% or less
TCKM3000P
PENDANT MODEL WITH AIR POWERED TROLLEY —SPECIFICATIONS
Cap. (Tons)
Product Code
Std. Lift (ft.)
Push Button Hose L (ft)
Up/Down Speeds (ft/min @90 psi)
Traversing Speed (ft/min)
Air Consumption Rates (cfm @90 psi)
Flange Width Adj B (in)
Min. Allow. Radius for Curve (in)
Load Chain Dia. (mm) x Chain Fall Linets
Net Wgt. (lbs)
Wgt. For Add. One Foot of Lift (lbs)
No Load
Full Load
TCR
MCL
No Load
Full Load
No Load Full Load
3
TCKM3000P
10
8.6
37 / 23
18 / 38
65
148 / 141
124 / 152
53
3.94 to 6.02
51.2
12.5x1
326
2.3
6
TCKM6000P2
18 / 12
9/19
148 / 141
124 / 152
4.92 to 7.02
78.7
12.5x2
461
4.6
PENDANT MODEL WITH AIR POWERED TROLLEY—DIMENSIONS
Cap. (Tons)
Product Code
Headroom C (in)
b (in)
b' (in)
d (in)
e (in)
e' (in)
g (in)
i (in)
j (in)
k (in)
m (in)
n (in)
r (in)
t (in)
3
TCKM3000P
29.5
13.4
17.4
10.5
6.9
3.9
1.3
4.9
1.4
5
5.1
5.5
2.8
1.7
6
TCKM6000P2
34.1
15.7
19.8
10.8
8.1
4.3
1.7
5.5
1.4
5.5
5.7
6.1
3.9
2.3
Order Online
Click the button of the item you wish to purchase.
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook. For lift and pendant length limitations, consult us. For lifts or pendant lengths other than standard, use 10 ft. base price plus adders for load chain and pendant control
* WACSP - additional assembly charge - $380.40. applies for any special pendant length shorter or longer than our standard length.
For flange ranges beyond this chart, consult us. Pricing applies only when purchased with MCR trolley.
TCK AIR POWERED HOISTS WITH PUSH TROLLEY
TCK air powered hoists can be used with our push trolleys for added mobility. The economical PT manual trolleys are perfect for lighter, infrequent moves and in small workshops.
Features and Benefits
Manual Trolleys
Shafts Standard shafts fit wide range of beams Longer shafts available for larger beams Spacers for easy adjustments Wheels All steel Sealed ball bearings Fit flat or tapered beam flange
Standard Hoist Specifications
Capacity Range 3 – 6 Ton Control Option on Hoist TCKP—Pendant and cord Standard Hand Chain Length On geared trolleys Hangs approximately 2' less than fully extended bottom hook (longer lengths available)
TCKP3000P
TCKP Air Powered Hoists with Push Trolley - Specs & Dimensions
PENDANT MODEL WITH PUSH TROLLEY—SPECIFICATIONS
Cap. (Tons)
Product Code
Std. Lift (ft.)
Push Button Hose L (ft)
Up/Down Speeds (ft/min @90 psi)
Up/Down Air Consuption Rates (cfm @90 psi)
Flange Width Adjustability B (in)
Min.* Allow. Radius for Curve (in)
Load Chain Dia. (mm) x Chain Fall Linets
Net Wgt. (lbs)
Wgt. For Add. One Foot of Lift (lbs)
No Load
Full Load
No Load
Full Load
Std.
Optional
3
TCKP3000P
10
8.6
37 / 23
18 / 38
148 / 141
124 / 152
3.23 to 6.02
6.03 to 12.00
25.6
12.5x1
269
2.3
6
TCKP6000P2
18 / 12
9/19
148 / 141
124 / 152
5.50 to 8.66
8.67 to 12.00
118.1
12.5x2
505
4.6
*Minimum flange width for curved beam: 3 Ton Push and Geared = 3.50 in
CORD MODEL WITH PUSH TROLLEY—SPECIFICATIONS
Cap. (Tons)
Product Code
Std. Lift (ft.)
Cord L (ft)
Up/Down Speeds (ft/min @90 psi)
Up/Down Air Consuption Rates (cfm @90 psi)
Flange Width Adjustability B (in)
Min.* Allow. Radius for Curve (in)
Load Chain Dia. (mm) x Chain Fall Linets
Net Wgt. (lbs)
Wgt. For Add. One Foot of Lift (lbs)
No Load
Full Load
No Load
Full Load
Std.
Optional
3
TCKP3000C
10
7.3
37 / 23
18 / 38
148 / 141
124 / 152
3.23 to 6.02
6.03 to 12.00
25.6
12.5x1
269
2.3
6
TCKP6000C2
18 / 12
9/19
148 / 141
124 / 152
5.50 to 8.66
8.67 to 12.00
118.1
12.5x2
505
4.6
*Minimum flange width for curved beam: 3 Ton Push and Geared = 3.50 in
PENDANT AND CORD MODEL WITH PUSH TROLLEY—DIMENSIONS
Cap. (Tons)
Product Code
Headroom C (in)
a (in)
b (in)
e (in)
g (in)
h (in)
i (in)
j (in)
k (in)
m (in)
n (in)
r (in)
t (in)
3
TCKP3000C/P
21.5
12.6
12.8
3.1
1.3
5.8
3.94
1.2
5.3
3.1
6.0
2.7
1.42
6
TCKP6000C2/P2
33.4
17.6
18.9
4.1
1.7
7.3
6.10
3.5
6.7
3.4
7.7
6.0
2.76
Order Online
Click the button of the item you wish to purchase.
TCK air powered hoists can be used with our geared trolleys for added mobility. The economical GT manual trolleys are perfect for lighter, infrequent moves and in small workshops.
Features and Benefits
Manual Trolleys
Shafts Standard shafts fit wide range of beams Longer shafts available for larger beams Spacers for easy adjustments Wheels All steel Sealed ball bearings Fit flat or tapered beam flange
Standard Hoist Specifications
Capacity Range 3 – 6 Ton Control Option on Hoist TCKG—Pendant and cord Standard Hand Chain Length On geared trolleys Hangs approximately 2' less than fully extended bottom hook (longer lengths available)
TCKG3000P
TCKG Air Powered Hoists with Geared Trolley - Specs & Dimensions
PENDANT MODEL WITH GEARED TROLLEY—SPECIFICATIONS
Cap. (Tons)
Product Code
Std. Lift (ft.)
Push Button Hose L (ft)
Up/Down Speeds (ft/min @90 psi)
Up/Down Air Consuption Rates (cfm @90 psi)
Flange Width Adjustability B (in)
Min.* Allow. Radius for Curve (in)
Load Chain Dia. (mm) x Chain Fall Linets
Net Wgt. (lbs)
Wgt. For Add. One Foot of Lift (lbs)
No Load
Full Load
No Load
Full Load
Std.
Optional
3
TCKG3000P
10
8.6
37 / 23
18 / 38
148 / 141
124 / 152
3.23 to 6.02
6.03 to 12.00
66.9
12.5x1
287
2.9
6
TCKG6000P2
18 / 12
9/19
148 / 141
124 / 152
5.50 to 8.66
8.67 to 12.00
118.1
12.5x2
553
5.2
*Minimum flange width for curved beam: 3 Ton Push and Geared = 3.50 in
CORD MODEL WITH GEARED TROLLEY—SPECIFICATIONS
Cap. (Tons)
Product Code
Std. Lift (ft.)
Cord L (ft)
Up/Down Speeds (ft/min @90 psi)
Up/Down Air Consuption Rates (cfm @90 psi)
Flange Width Adjustability B (in)
Min.* Allow. Radius for Curve (in)
Load Chain Dia. (mm) x Chain Fall Linets
Net Wgt. (lbs)
Wgt. For Add. One Foot of Lift (lbs)
No Load
Full Load
No Load
Full Load
Std.
Optional
3
TCKG3000C
10
7.3
37 / 23
18 / 38
148 / 141
124 / 152
3.23 to 6.02
6.03 to 12.00
66.9
12.5x1
284
2.9
6
TCKG6000C2
18 / 12
9/19
148 / 141
124 / 152
5.50 to 8.66
8.67 to 12.00
118.1
12.5x2
551
5.2
*Minimum flange width for curved beam: 3 Ton Push and Geared = 3.50 in
PENDANT AND CORD MODEL WITH GEARED TROLLEY—DIMENSIONS
Cap. (Tons)
Product Code
Headroom C (in)
E (ft)
a (in)
b (in)
e (in)
g (in)
h (in)
i (in)
j (in)
k (in)
k' (in)
m (in)
n (in)
r (in)
t (in)
u (in)
3
TCKG3000C/P
21.5
9.8
31.2
12.8
15.9
1.3
5.8
3.94
1.2
5.3
4.5
3.1
6.0
2.7
1.42
7.2
6
TCKG6000C2/P2
33.4
10.8
29.7
18.9
14.6
1.7
7.3
6.10
3.4
6.7
6.5
3.4
7.7
6.0
2.76
8.4
Order Online
Click the button of the item you wish to purchase.
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook. For lift, cord and pendant length limitations, consult us. Maximum pendant drop is 40 ft. Standard hand chain drop is included in base price of geared trolleys.
* WACSP - additional assembly charge - $294.50
. applies for any special pendant length shorter or longer than our standard drop.
Air Powered Hoists, TCK, Air Operated Hoists, Air Hoist, Air Powered Hoist, Chain Hoists, Air Chain Hoists, Trolleys, Hoists, Harrington, and Shop Air Chain Hoists from your source for material handling equipment.
