Material
handling is more efficient with our SafeMezz® Horizontal
Gate. Once installed on your mezzanine, this gate
opens and closes as needed. Forklift materials to your elevated
space and slide the gate closed to protect employees
from dangerous workplace falls.
The
SafeMezz Horizontal Gate opens by manual or automated operation.
Activate your gate with the push of a
button or by the pull of a cord. Once material has been delivered
to your mezzanine, close the gate to protect the
mezzanine edge. This gate is ideal for mezzanines with limited
headroom.
Designed
to meet OSHA standards 1910.28 and 1910.29.
Available in powder coat safety yellow finish.
Heavy-duty 1.5" X 1.5" 11-gauge square tube gate construction
SAFEMEZZ®
HORIZONTAL GATE BENEFITS
•
Ideal for material handling, mezzanine openings, pallet racking,
warehousing and picking/packaging areas
• 42" high gate with 4" safety toe board
• On-deck or off-deck mounting options
• Available in two stock sizes to meet your opening width
requirements.
MATERIAL:
• Gate: 1-1/2" square, 11-gauge tube, factory welded.
Solid horizontal top rail and mid-rail, 4"
high toeboard,
42" overall height, and vertical members not
to exceed
8' on center.
•
Gate material to be:
- Mild steel
HARDWARE:
• Track, guides, brackets, and mounts: Furnished in
accordance with material type and dimensional
requirement of gate, in lengths and sizes appropriate
for handling and shipping.
INSTALLATION:
• Mounting location: Deck mount (standard) or face
mount available.
FINISH:
• Mild steel: Powder coat yellow on all unfinished exposed
surfaces (standard).
PERFORMANCE
RATING:
• Gate shall meet or exceed OSHA requirements, relative
to dimensions and loads, at the time of manufacture.
FACE
MOUNT
DECK
MOUNT
HORIZONTAL
SLIDING MEZZANINE GATE TECHNICAL DATA:
1.
Operation:
a.
Manual
b. Electric; Electric Drive Operation, 115 VAC,
(24 VDC Secondary), 60 HZ, 1/3 HP.
Operator
control panel includes timer-to-close
capability, obstruction sensing and one (1)
three-button (Open-Stop-Close) control panel
mounted push button station, and one (1)
remotely located wall mount, secondary three-
button push button. Includes Amber-colored
WARNING strobe light, activates when gate
is in operation.
2.
Mounting Location:
a.
Deck Mount
b. Face Mount
3.
Gate Section: To be factory welded frame work
with horizontal top rail. Includes mid-rail,
4
high toe board, 42" overall height,
and vertical
members not to exceed 8’0"
on center. Gate shall
meet or exceed Federal OSHA standard
for
standard railings at the time of manufacture
relative to dimensions and loading.
To be fa-
bricated from one of the following:
a.
Mild Steel
b. 304-2b Stainless Steel
c. 316L Stainless Steel
4.
Rollers: To be minimum 2 5/8" diameter,
concealed within toe board. Rollers
to be
non-corrosive.
5.
Slide Direction: Gate system can be set up for
left or right slide direction during installation.
Refer to Installation Instructions
in Operations
and Maintenance Manual.
6.
Finish:
a.
Mild steel mezzanine gates; exposed surfaces
to be Powder Coat Safety Yellow.
Hardware/fasteners to be zinc plated.
7.
Warranty: To be One (1) Year from date of
shipment, finish excluded.
8.
Available Options:
a.
Remote controls; gate systems with electric
controls only.
b. Photo-eyes; gate systems with electric
controls only.
c. Pull cord switch; gate systems with electric
or pneumatic controls only
9.
Exclusions:
a.
All electric wiring or airline piping to and between all components
by others.
b. Due to variances in field conditions, it is the responsibility
of the installer to ensure that the
product is installed to mounting structure
that is capable of supporting all imposed loading
from the product. The installer is
responsible for ensuring that the provided fastening hard-
ware or field configured mounting arrangement
is capable of supporting all field loads and
meets applicable codes and regulations.
Order Online
Click the button of the item you wish to purchase.
