OCH Series Outdoor/ Indoor Rated Quartz Electric Infrared Heater
OCH Series Outdoor / Indoor Rated Quartz Electric Infrared Heater
FEATURES
• Frosted Quartz Tube heating element (included) • Listed for suspended, totally exposed (outdoor) and indoor spot heating applications • Finish: High-temp brown powder coated finish or corrosion resistant stainless steel 24 gauge housing • 60° Symmetric Heat Pattern • Gold anodized Aluminum reflector and end caps • Painted models are direct wire, unless specified and are supplied with 6" lead wires for field connection in the internal wiring compartment. These models are available with a factory installed 6’ cord set. The 208V model must have a field supplied plug.
• Stainless steel models include an electrical enclosure assembled to the end of the heater housing and (2) 6" long lead wires for direct field connection. • Two 2’ ft. long mounting chains and four S-Hooks included • The OCH-Series can be surfaced mounted using the supplied mounting brackets which allow up to a 45° horizontal tilt adjustment. • Made in U.S.A.
Housing: 24 gauge Aluminized Steel with a baked on brown powder coat finish. Housing is cETLus Listed for indoor or outdoor applications. Horizontal mounting only.
Reflectors and End Caps: .040 Gold anodized Aluminum reflectors and end caps for superior reflectiveness. 60 degree medium (symmetric) pattern only.
Elements: Quartz Tubes. Frosted quartz envelope with a Nickel-Chromium coiled filament, porcelain end caps, and threaded-screw (stud) terminations. Fast heat-up and cool-down performance. Available Wattages from 1500 to 3000 Watts per element. Available voltages from 120 to 480 Volts.
Controls: OCH Series heaters are not manufactured with any control device on the unit. All controls are accessories and should be specified as such. Please consult the technical sales department of factory for help in determining applicable controls. Please follow installation instructions that accompany each heater.
Mounting • Chain, surface mount or use our vertical mounting bracket as shown below. (Note:) All units must be mounted horizontally. • In-Built surface mounting bracket allows for fixture adjustment up to a 45° horizontal tilt. • As shown, the heater may be suspended at any horizontal angle desired.
Mounting Clearances & Recommended Mounting Height
MOUNTING CLEARANCES
RECOMMENDED MOUNTING HEIGHT
3" from ceiling; 12" from vertical surface 72" from face of heater to combustible surface 36" from another heater
OCH-46
7'-9'
OCH-57
8'-10'
Outdoor/Indoor Electric Infrared Heater, Ceramic Fan Forced Heater, Radiant Forced Heater, Electric Heater, Space Heaters, Portable Baseboard Heater, Ceramic Heaters, and Portable Fan Heaters from your source for material handling equipment.
