THE
PROBLEMS:
• HAZARDS OF RACKING HEAVY DRUMS • MOVING DRUMS ON AND OFF UPPER RACKS
• HANDLING DRUMS WHERE A FORKLIFT
WON'T FIT
• LIFTING DRUMS FROM VERTICAL TO
HORIZONTAL • ADEQUATE RACK SPACE FOR DRUM
STORAGE
THE
SOLUTION: The affordable MORStak™
Drum Rackers
•RACK
YOUR DRUMS UP TO 8.5'(2.59m)
HIGH!
• STACK DRUMS SIDE BY SIDE WITH
VIRTUALLY ZERO CLEARANCE, EASILY
LIFT, MOVE AND RACK A DRUM
• SIMPLE TO OPERATE
• COMPACT BASE WITH 6 FOOT (183cm)
TURNING RADIUS
• CAPACITY: 800 LB. (383 kg)
MORStak™
Drum Rackers
With
the MORStak™ Drum Racker you can easily and safely lift
an upright drum from the floor, tilt it to horizontal,
transport it, and set it into a drum rack up to 8.5 feet high.
Then reverse the entire process to retrieve your drum from
the rack.
MORStak™
Drum Rackers replace expensive lift
trucks. They eliminate hazardous "bare fork" handling
of drums, upends and down-ends of drums, and they
move in tighter spaces. MORStaks handle a drum with
faucet and vent in place so the rack may serve as a
multiple drum dispensing station.
Rugged
two-stage frame of MORStak™ Drum Rackers
provides lift range for a four tier drum rack with top shelf
as high as 102" (259 cm). Single-stage MORStak™ Drum
Rackers provide reach for a two tier drum rack with top
shelf as high as 56" (142 cm).
Two
easy-to-use valve handles control the power lift and
tilt functions. A visual indicator informs the operator of the
recommended height for tipping drums. Special features
prevent tilting drum from horizontal until operator secures
drum in place. Choices of Air, AC, or 12V DC powered
lift and tilt are available.
The
most dense racking is possible because drums need
not be separated. Lifting arms fit easily into the spaces
below the curvature of the drum. This enables the most
efficient use of storage space. Designed to handle 55
gallon (210 liters) steel or plastic drum with suitable rim.
Capacity is 800 lb. (383 kg). The 5" dia. front wheels
fit under your drum rack.
Watch
Video Here
Pad
Kit to Lift and Rack a 55-Gallon Rimmed Plastic Drum
The
Drum Pad Kit is included with MORStak™ Models for plastic
drum. It allows
you to handle a 55-gallon (208 liter) plastic drum with top
rim, as well as a 55-gallon
steel drum. Installing this kit reduces maximum drum cradle
width from 19" (48.3
cm) to 13" (33 cm).
MORStak™
Drum Rackers handle ONLY a 55-gallon (208 liter) steel or plastic
drum with top rim, and maximum
weight of 800 Lb. (363 kg). They will NOT handle a smaller drum
or a drum without a top rim. They have a positive
drum gripping mechanism that must be manually engaged before
lifting an upright drum or tilting a drum from
horizontal position. MORStak™ drum rackers will not allow
you to tilt your drum without the clamp engaged.
MORStak™
Drum Rackers with spark resistant parts (model 620M-114 and
611M-114) ONLY handle a 55-gallon
(208 liter) steel drum with top rim. They will NOT handle a
plastic drum.
Order Online
Click the button of the item you wish to purchase.
*12V
DC battery powered hydraulics, includes battery and 50/60Hz
charger.
**Air motor requires 40 psi at 40 scfm. Do NOT exceed 60 psi.
Install Filter, Regulator and Lubricator
(Part #3869-P
$440) in accordance with
air motor manufacturer's recommendations. See Air Motor Technical
Information.
Morstak Drum
Rackers, Morse, Drum Grabs, Drum Handlers, Drum Handling,
Drum Lifters, Barrel Handling, Drum Carriers,
Drum Dumpers, Drum Handling Equipment, Drum Lift, Drum Lifting
Equipment, and Drum Stackers from your source for material
handling equipment.
