Used
on loading docks with dock seals,
or where refrigeration or warmth is need.
Loading dock bumper and the dock-seal
interact to completely seal the truck to the
dock..
Uses/Applications:
•
Have unlimited applications in factories,
warehouses and docks.
• Vehicle impact protection for loading
docks.
• Projecting above low docks.
• Rub rails at the sides of truck wells.
• Wall bumpers to protect against fork lift
trucks.
• Special construction features to accom-
modate unusual anchoring conditions
Features
•
Tough piles of truck tire material virtually eliminates chipping
or
abrasion, unlike molded rubber, extruded rubber,
conveyor
belting or wood plank bumpers.
• Attractive deep black color enhances a neat, professional
architectural look.
• Manufactured under pressure exceeding 1,500 lbs. to absorb
over 80% of impact force.
• Anchor bolts are protected by at least 3" of rubber
to prevent
damage.
• Maintenance free.
Installation
•
Structural mounting angles permit welded
installations or provide bolting through
steel.
• No assembly required.
Material/Thickness
•
Durable Laminated Dock Bumpers
contain 80% recycled material from
fabric reinforced rubber pads cut from
selected recycled truck tires.
• Rubber pads laminated between struc-
tural steel angles and secured with 3/4"
steel tie rods.
Specifications
•
Resilient rubber material of bumpers shall be rub-
berized-fabric truck tires cut to uniform size
pads
4-1/2" x 10", 6" x 10", 4-1/2"
x 12", or 6" x 12".
Pads punched to receive 3/4" supporting rods.
• All bumper are closed with two 1/4" structural
angles under approximately 1,500 lbs of pressure.
The angles are welded to 3/4" rods at one
end and
closed with threaded rod and nut at the other end.
1/4" flat plates may be substituted for one
of both
angles.
• The anchor leg of angle extends a minimum of 3"
beyond the rubber surface at either end and contains
two or three 13/16" anchor bolt holes as required.
(Anchor bolts are supplied separately.)
• Black finish.
Benefits
Notes:
• Prevents
loss of refrigeration of warmth.
• Maintenance free-weather resistant.
• Absorbs over 80% of truck impact and shock to
protect dock and building.
• 5 year warranty.
•
1/4" flat plates may be substituted for one or both angles.
• If additional anchorage devices are required there is
an
additional charge for each device.
• Drawings are anchorage devices are available.
Order Online
Click the button of the item you wish to purchase.
Note: 1/4"
flat plates may be substituted for one or both angles.
*Refer to form XL-1 and insert the number indicating the TYPE
of anchorage device desired. (AD-1, AD-2, AD-3
or AD-T.) AD-3 will be used unless otherwise specified. If
additional anchorage devices are required, ADD $17
each, additional galvanized AD's ADD $23each. Note: Drawings of Anchorage Devices are shown above.
Notes: • 1/4" flat plates may be substituted
for one or both angles.
• Galvanized Add on is for exposed metal only - if galvanized
ALL metal is required please call for pricing Overlap Angles available for bumpers 36" bolt
hole centers and greater. A 10% upcharge will apply.
Extra Length
Laminated Dock Bumpers, Laminated Dock Bumpers, Loading Dock
Bumpers, Extra Length Dock Bumpers, Truck
Dock Bumpers, Extra Length Rubber Bumpers, and Rubber Dock
Bumpers from your source from material handling equipment.
