Back to Product Page
|
ZIG-ZAG
|
|
NO.
2035 CONTINUOUS OVERHEAD POWER CHAIN CONVEYOR
|
|
|
|
|
The Original
Enclosed Track Conveyor
|
|
|
 |
Zig-Zag conveyor is constructed of standard, modular
components that guarantee easy installation, modification
and maintenance. Standard components also guarantee
quick accessibility . |
|
|
|
 |
|
|
|
|
|
|
NO.
2035 ZIG-ZAG CONVEYORS
|
|
 |
|
|
|
|
|
|
|
FEATURES:
|
| ELEVEN
STANDARD COMPONENTS |
|
VERTICAL
CHAIN WHEELS ON 6" CENTERS |
| •
Straight Track, 3/16" thick, stocked in 10' lengths |
|
•
Spread the same amount of load over more wheels |
| •
Welding Jig |
|
•
Reduce the point loading on track and reduce wear |
| •
Horizontal Curves, 3/16" thick, 90°, flame hardened
|
|
CAPACITIES |
| •
Top Vertical Curves, 3/16" thick, 90°, flame hardened
|
|
•
75 lbs. per load pin |
| •
Bottom Vertical Curves, 3/16" thick, 90°, flame hardened |
•
Standard drive packages up to 750 lb. chain pull |
| •
Conveyor Chain, 6" pitch |
|
|
|
| •
Take-up Assembly |
|
|
|
| •
Inspection Section |
|
|
|
| •
Chain Oiler |
|
|
|
| •
Standard Drive Packages |
|
|
|
| •
Load Pendant Attachments |
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
|
|
|
|
PRICING
FOR TRACKS AND BRACKETS
|
|
Model No. |
Description |
Weight/lbs. (ea.) |
Price per 10' length |
|
|
Track
(10'-0" Lengths)
|
50
|
$211
|
|
|
Track
11 Ga. (10'-0" Lengths)
|
35
|
$173
|
|
|
Twisted
Track (90º Clockwise)
|
50
|
$363
|
|
|
Twisted
Track (90º Counter Clockwise)
|
50
|
$363
|
|
|
Support
Bracket
|
2
|
$40
|
|
|
Joint
Bracket
|
3
|
$130
|
|
|
Track
Welding Jig
|
1.5
|
$214
|
|
|
H.D.
track, 6 Ga., 10' Long
|
55
|
$317
|
|
|
|
CONVEYOR
CHAIN
|
|
|
|
|
|
2035.01974
CHAIN
|
 |
|
Zig-Zag
chain is made with heavy steel stampings with a
hardened inner race. Precision alloy balls make Zig-Zag
chain rugged and durable for prolonged dependable life
and operation. |
|
|
|
|
|
|
|
FEATURES |
|
|
|
|
|
6"
Pitch Chain |
 |
|
|
|
Zig-Zag
chain has a pitch of 6" and is the shortest in the
industry. This allows up to 33 percent more productivity.
The pitch of our chain allows you to space load pendants
closer with less wheel loading, allowing for more product
throughput. This shorter pitch also allows for tighter radius
horizontal curves. We can provide standard stock 18"
radius horizontal curves. |
|
|
|
Load
Pin |
|
|
|
Zig-
Zag chain is manufactured with a pendant load pin.
Unlike the industry, our pendants are mounted to a load
pin and not the wheel axle. This eliminates unnecessary
wear and torsional loads to critical parts of the chain,
thereby increasing your productivity and decreasing your
downtime. |
|
|
|
|
|
|
|
Installation
and Maintenance |
|
|
|
|
|
By
design, Zig-Zag chain is made for ease of installation
and maintenance. Our chain may be disassembled at any
point by simply removing a cotter pin. Zig-Zag chain is
available from stock in 10' boxes or in bulk 300' barrels. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
PRICING
FOR STANDARD CONVEYOR CHAIN
|
|
Model No. |
Description |
Weight/lbs.
(ea.) |
Price |
|
|
Conveyor
chain , 10' long, caged bearings
|
33
|
$479
|
|
|
Conveyor
chain, 300' length (6 pieces @50' each), CB
|
990
|
$14,342
|
|
|
Chain
Installation Kit (Links, Link Pin's Cotters)
|
1
|
$150
|
|
|
Chain
& Bearing Cleaner Assembly
|
20
|
$3,175
|
|
|
Track
Cleaner Brush Assembly (attaches to chain)
|
1
|
$795
|
|
|
|
|
STANDARD
CURVES
|
|
|
|
|
|
|
|
|
|
|
|
|
| VERTICAL
CURVES |
|
|
 |
|
The
illustration shows the action of the wheels and the manner in
which they
bear against the inside of the track when going around vertical
curves. The
wheels, you will note, contact the top of the track on bottom
curves and the
bottom of the track on top curves. The chain, in this way, is
guided around
short radius vertical curves. |
|
|
|
|
|
|
|
|
|
| HORIZONTAL
CURVES |
|
|
|
The
illustration shows how the chain passes around horizontal curves
without
the use of special guides, sprockets, or wheel turns. |
|
Please
note from the cutaway section how the lateral wheels bear on
the side
of the track when the chain is drawn around curves. A series
of wheels
constantly share the load imposed upon the track, thereby reducing
friction
and insuring smooth conveyor operation. |
|
Curves
with these radius are standard:
1'-6",2'-0", 2'-3", 3'-0", 3'-3", 4'-0"
and 4'-3". |
|
|
|
|
|
Top
Vertical Curve
|
|
|
|
|
|
|
|
NOTE:
All curves up to 3'-0" are available hardened for increased
life and
made of heavy-duty 3/16" material, heaviest in the industry. |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Bottom
Vertical Curve
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
Looking
through side of track. Track cut-away of
chain passing through reverse vertical curve. |
|
|
|
|
|
|
|
|
 |
|
|
|
|
Horizontal
Curve
|
|
|
|
|
|
|
|
|
|
|
Looking
through top of track. Track cut-away to
give bird's eye view of chain in track, illustrating
operation in horizontal curve. |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2035.02679
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
|
|
|
PRICING
FOR STANDARD HORIZONTAL CURVES
|
|
Model Number |
Description |
Weight/lbs. (ea.) |
Price |
|
|
Curve
1'-6" R x 90º (hardened)
|
15
|
$473
|
|
|
Curve
1'-6" R x 180º (hardened)
|
24
|
$780
|
|
|
Curve
2'-0" R x 30º
|
6
|
$245
|
|
|
Curve
2'-0" R x 45º
|
8
|
$298
|
|
|
Curve
2'-0" R x 90º (hardened)
|
15
|
$409
|
|
|
Curve
2'-0" R x 180º (hardened)
|
30
|
$827
|
|
|
Curve
2'-3" R x 90º (hardened)
|
18
|
$411
|
|
|
Curve
3'-0" R x 90º
|
24
|
$447
|
|
|
Curve
3'-3" R x 90º
|
26
|
$472
|
|
|
Curve
4'-0" R x 90º
|
32
|
$476
|
|
|
Curve
4'-3" R x 90º
|
34
|
$479
|
|
|
PRICING
FOR SPECIAL HORIZONTAL CURVES
|
|
Up
to 5'-9" R x 90° or less
|
|
$760 |
|
6'-0"
to 11'-9" R x 45° or less
|
|
|
|
$784 |
|
|
|
|
|
|
|
|
|
PRICING
FOR STANDARD VERTICAL CURVES
|
|
Model Number |
Description |
Weight/lbs. (ea.) |
Price |
|
|
Top
Vertical Curve 2'-0" x 30º
|
6
|
$236
|
|
|
Bottom
Vertical Curve 2'-0" x 30º
|
6
|
$236
|
|
|
Top
Vertical Curve 2'-0" x 45º
|
8
|
$288
|
|
|
Bottom
Vertical Curve 2'-0" x 45º
|
8
|
$288
|
|
|
Top
Vertical Curve 2'-0" R x 90º
|
25
|
$451
|
|
|
Bottom
Vertical Curve 2'-0" R x 90º
|
25
|
$451
|
|
|
Top
Vertical Curve 4'-0" R x 90º
|
53
|
$1,767
|
|
|
Bottom
Vertical Curve 4'-0" R x 90º
|
53
|
$1,767
|
|
| NOTE:
All horizontal curves are cut off at the tangents and do not
include any straight track. |
|
|
FIELD
FABRICATED CURVES
|
|
|
 |
|
| VERTICAL
CURVE DATA |
|
|
|
|
|
Note:
The Vertical Curve dimensions in the chart
below are based on using 2'-0" radius curves. |
|
|
|
|
| 45°,
2'-0" radius vertical curve shown. |
|
|
|
|
|
|
A |
30° |
45° |
60° |
|
B |
C |
D |
B |
C |
D |
B |
C |
D |
|
6 7/16" |
0'-0" |
2'-0" |
2'-1 1/8" |
- |
- |
- |
- |
- |
- |
|
9" |
0'-5 1/8" |
2'-4 7/16" |
2'-6 1/4" |
- |
- |
- |
- |
- |
- |
|
12" |
0'-11 1/8" |
2'-9 5/8" |
3'-1/4" |
- |
- |
- |
- |
- |
- |
|
1'-2" |
1'-3 1/8" |
3'-1 1/8" |
3'-4 1/4" |
1/16" |
2'-9 15/16" |
3'-1 11/16" |
- |
- |
- |
|
1'-6" |
1'-11 1/8" |
3'-8 1/16" |
4'-1/4" |
5 9/16" |
3'-1 7/8" |
3'-7 1/4" |
- |
- |
- |
|
1'-9" |
2'-5 1/8" |
4'-1 1/4" |
4'-6 1/4" |
9 13/16" |
3'-4 7/8" |
3'-11 1/2" |
- |
- |
- |
|
2'-0" |
2'-11 1/8" |
4'-6 7/16" |
5'-1/4" |
1'-2 1/6" |
3'-7 7/8" |
4'-3 3/4" |
0'-1/16" |
3'-5 9/16" |
4'-2 1/4" |
|
2'-3" |
3'-5 1/8" |
4'-11 5/8" |
5'-6 1/4" |
1'-6 5/16" |
3'-10 7/8" |
4'-8" |
0'-3 7/16" |
3'-7 5/16" |
4'-5 3/4" |
|
2'-6" |
3'-11 1/8" |
5'-13/16" |
6'-1/4" |
1'-10 9/16" |
4'-1 7/8" |
5'-1/4" |
0'-6 15/16" |
3'-9 1/16" |
4'-9 3/16" |
|
2'-9" |
4'-5 1/8" |
5'-10" |
6'-6 1/4" |
2'-2 13/16" |
4'-4 7/8" |
5'-10 1/8" |
0'-10 3/8" |
3'-10 3/4" |
5'-11/16" |
|
3'-0" |
4'-11 1/8" |
6'-3 3/16" |
7'-1/4" |
2'-7 1/16" |
4'-7 7/8" |
5'-8 3/4" |
1'-1 7/8" |
4'-1/2" |
5'-4 1/8" |
|
3'-6" |
5'-11 1/8" |
7'-1 5/8" |
8'-1/4" |
3'-3 1/2" |
5'-1 7/8" |
6'-5 3/16" |
1'-8 13/16" |
4'-3 15/16" |
5'-11 11/16" |
|
4'-0" |
6'-11 1/8" |
8'-0" |
9'-1/4" |
4'-1/16" |
5'-7 7/8" |
7'-1 11/16" |
2'-3 11/16" |
4'-7 7/16" |
6'-6" |
|
4'-6" |
7'-11 1/8" |
8'-10 3/8" |
10'-1/4" |
4'-8 1/2" |
6'-1 7/8" |
7'-10 13/16" |
2'-5/8" |
4'-10 7/8" |
7'-15/16" |
|
5'-0" |
8'-11 1/8" |
9'-8 13/16" |
11'-1/4" |
5'-5 1/16" |
6'-7 7/8" |
8'-6 11/16" |
3'-5 9/16" |
5'-2 3/8" |
7'-7 13/16" |
|
5'-6" |
9'-11 1/8" |
10'-7 13/16" |
12'-1/4" |
6'-1 7/16" |
7'-1 7/8" |
9'-3 1/8" |
4'-1/2" |
5'-5 13/16" |
8'-2 3/4" |
|
6'-0" |
10'-11 1/8" |
11'-5 9/16" |
13'-1/4" |
6'-9 15/16" |
7'-7 7/8" |
9'-11 5/8" |
4'-7 7/16" |
5'-9 5/16" |
8'-9 11/16" |
|
6'-6" |
11'-11 1/8" |
12'-3 15/16" |
14'-1/4" |
7'-6 7/16" |
8'-1 7/8" |
10'-8 1/8" |
5'-2 3/8" |
6'-3/4" |
9'-4 5/8" |
|
7'-0" |
12'-11 1/8" |
13'-2 3/8" |
15'-1/4" |
8'-2 15/16" |
8'-7 7/8" |
11'-4 5/8" |
5'-9 5/16" |
6'-4 3/16" |
9'-11 9/16" |
|
7'-6" |
13'-11 1/8" |
14'-3/4" |
16'-1/4" |
8'-11 3/4" |
9'-1 7/8" |
12'-1 1/8" |
6'-4 3/16" |
6'-7 11/16" |
10'-6 1/2" |
|
8'-0" |
14'-11 1/8" |
14'-11 1/8" |
17'-1/4" |
9'-7 7/8" |
9'-7 7/8" |
12'-9 9/16" |
6'-11 1/8" |
6'-11 1/8" |
11'-1 3/8" |
|
8'-6" |
15'-11 1/8" |
15'-9 1/2" |
18'-1/4" |
10'-4 3/4" |
10'-1 7/8" |
13'-6 1/16" |
7'-6 1/16" |
7'-2 5/8" |
11'-8 5/16" |
|
9'-0" |
16'-11 1/8" |
16'-7 15/16" |
19'-1/4" |
11'-7/8" |
10'-7 7/8" |
14'-2 9/16" |
8'-1" |
7'-6 1/16" |
12'-3 1/4" |
|
9'-6" |
17'-11 1/8" |
17'-6 5/16" |
20'-1/4" |
11'-9 5/16" |
11'-1 7/8" |
14'-1 1/16" |
8'-7 15/16" |
7'-9 1/2" |
12'-10 3/16" |
|
10'-0" |
18'-11 1/8" |
18'-4 11/16" |
21'-1/4" |
12'-5 13/16" |
11'-7 7/8" |
15'-7 1/2" |
9'-2 7/8" |
8'-1" |
13'-5 1/8" |
|
10'-6" |
19'-11 1/8" |
19'-3 1/8" |
22'-1/4" |
13'-2 5/16" |
12'-1 7/8" |
16'-4" |
9'-9 3/4" |
8'-4 7/16" |
14'-1/16" |
|
11'-0" |
20'-11 1/8" |
20'-1 1/2" |
23'-1/4" |
13'-10 13/16" |
12'-7 7/8" |
17'-1/2" |
10'-4 11/16" |
8'-7 15/16" |
14'-7" |
|
11'-6" |
21'-11 1/8" |
20'-11 7/8" |
24'-1/4" |
14'-7 1/4" |
13'-1 7/8" |
17'-9" |
10'-11 5/8" |
8'-11 3/8" |
15'-1 7/8" |
|
12'-0" |
22'-11 1/8" |
21'-10 1/4" |
25'-1/4" |
15'-3 3/4" |
13'-7 7/8" |
18'-5 7/16" |
11'-6 9/16" |
9'-2 7/8" |
15'-8 13/16" |
|
12'-6" |
23'-11 1/8" |
22'-8 11/16" |
26'-1/4" |
16'-1/4" |
14'-1 7/8" |
19'-1 15/16" |
12'-1 3/8" |
9'-6 5/16" |
16'-3 3/4" |
|
|
|
|
TAKE-UP
ASSEMBLIES
|
|
| 2035.01687
FRAMED TAKE-UP |
|
|
|
|
|
|
|
Note:
Complete unit consists of one frame and one
set of hardware for screw, spring or air take-up. |
|
Ready
to be hoisted and hung, this frame provides a rigid base and
helps make alignment positive. The frame is permanently mounted;
only the actuator and conveyor move. Tensioning is accomplished
with your choice of screw, spring, or air cylinder packages
listed
below. Available for 2'-0" R curves (4' maximum track spread). |
|
|
|
|
|
 |
|
|
|
|
|
|
Some
type of tensioning is necessary on all Zig-Zag conveyor
systems to take up slack chain created by wear or temperature
changes. We make screw take-up fittings for field assembly. |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
|
|
|
|
Framed
Take-Up Assembly
|
|
|
Air
Package
|
|
Screw
Package
|
|
|
|
|
|
|
|
|
TAKE-UP
FITTINGS AND EXPANSION SLEEVE
|
|
|
|
2035.00583
SCREW
TAKE-UP FITTINGS
(1'-6" Travel) |
 |
|
|
|
|
|
|
|
|
|
2035.02497
AIR
TAKE-UP FITTINGS
(1'-0" Travel) |
|
|
NOTE:
Curves are not included in
assembly. |
|
|
|
|
|
|
|
|
 |
|
|
2035.00304
Safety Anti-Rollback Assembly |
|
Safety
Anti-Rollback Assembly for chain
is used as a safety device in the event of
a possible chain separation due to over-
loading conditions or jams. The unit is
designed for installation on the incline
portion of a vertical curve, and will act-
ivate the stop-finger to drop and wedge
in the chain if a chain separates, breaks,
or fails. Finished with powder coating. |
|
2035.00583
|
|
|
|
|
|
2035.0114
EXPANSION SLEEVE
|
|
|
2035.02671
Anti-Runaway Bolted Assembly
|
|
 |
|
|
 |
|
 |
|
|
|
|
|
Weight:
20 lbs |
|
|
|
The
2035.02671 Anti-Runaway Bolted Assembly is used as a
safety device in the event of a chain break or an improper
engagement of the pusher dog and carrier assembly. Designed
for installation on the decline portion of a vertical curve.
Operation: A sudden increase in chain or carrier speed will
cause the cam to bounce upward and release the trigger
mechanism; plunger will drop into the path halting the next
chain wheel. Finished in powder coating. |
|
|
|
|
Expansion
sleeves are used mainly in bake ovens and are
located in each track in the area of the oven expansion joint.
This allows both oven and conveyor to expand and contract
in unison. Many ovens, depending on length and temperature,
do not have expansion joints. In such cases, it is often
advisable to use an expansion sleeve at the exit and entrance
tracks to prevent snaking or waviness in the track both inside
and outside the oven.
|
|
|
|
|
|
|
|
2035.02497
Air Take-up Fittings, 12 inch travel |
|
 |
|
|
|
|
|
The
2035.02497 Air Take-Up Package
has a 12" travel and is finished with
powder coating. Package includes
tubing, fittings, regulator with gage
and shut-off valve.Curves must be
purchased separately and must not
exceed a 4 foot radius. |
|
|
|
|
Relative
to installation, the movable track in the sleeve
should be moved out 2" from the compressed length which
would then be an overall of 1'-6" instead of 1'-4"
as shown.
This allows for both contraction and expansion in the track. |
|
|
|
|
|
|
|
|
2035.01990
Screw Take-up Fittings, 48 inch Travel
|
|
|
|
|
|
|
 |
|
|
|
|
Screw
Take-Up Fittings have a 48' travel and are finished with
powder coating.Curves must be purchased separately and must
not exceed a 4 foot radius. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
PRICING
FOR STANDARD TAKE-UP FITTINGS
|
|
Model Number |
Description |
Weight/lbs. (ea.) |
Price |
|
|
Short
Screw Take-Up Sleeve Assembly (need 2 per take-up)
|
10
|
$672
|
|
|
Screw
Take-Up Fittings (18" Travel)
|
80
|
$2,305
|
|
|
Air
Take-up Fittings (12" Travel)
|
85
|
$4,858
|
|
|
Framed
Take-Up Basic Assembly (12" Travel)
|
185
|
$3,947
|
|
|
Screw
Take-Up Package (12" Travel)
|
10
|
$328
|
|
|
Spring
Take-up Package (12" Travel)
|
19
|
$504
|
|
|
Air
Take-up Package (12" Travel)
|
55
|
$1,956
|
|
|
Limit
Switch Package (1 Limit Switch w/Bracket)
|
10
|
$1,551
|
|
|
Expansion
Sleeve
|
8
|
$410
|
|
|
Safety
Stop (Anti Back-Up)
|
3
|
$488
|
|
|
Anti-Runaway
Assembly
|
20
|
$1,299
|
|
|
Screw-Up
Fittings (48' Travel)
|
120
|
$2,998
|
|
|
SKELETON
DRIVE
|
|
|
|
|
|
The
2035.01373 skeleton drive unit incorporates the use
of a caterpillar drive chain connection to the head shaft
and idler shaft assembly. The skeleton drive is not equip-
ped with a motor, reducer, friction clutch, driven sprocket,
or roller chain. |
 |
|
2035.01373
(shown with Chain Guards)
|
|
|
|
|
|
|
|
The
skeleton drive unit is used in Zig-Zag, Twin-Trak and
OveR-Way applications. Most commonly, the unit is used
where the customer needs to replace their existing drive,
but wants to use the existing motor, reducer, and sprockets.
The skeleton is also used where the customer wants to
supply his own motor, reducer, and sprockets. The unit can
be used with an extended head shaft and jackshaft to join
two or more conveyors together for timing purposes. |
 |
|
2035.01373
(shown without Chain Guards)
|
|
|
|
|
|
|
|
| The
capacity of the unit is 750 lbs. Chain Pull. |
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
PRICING
FOR DRIVE UNITS
|
Model
Number |
Description |
Weight/lbs.
(ea.) |
Price |
|
|
Drive
Unit (Variable Speed 3 to 16 F.P.M. when used with A.C.
Inverter Control listed below)230/460/3/60 T.E.F.C.
3/4 H.P. Motor NOTE: at 60 cycle line current constant
speed 16 F.P.M.
|
305
|
$13,029
|
|
|
Drive
Unit (Variable Speed 9 to 45 F.P.M. when used with A.C.
Inverter Control listed below)230/460/3/60 T.E.F.C.
1-1/2 H.P. Motor NOTE: at 60 cycle line current constant
speed 45 F.P.M.
|
315
|
$13,063
|
|
|
Skeleton
Drive Unit
|
215
|
$7,722
|
|
|
Encoder
Adapter
|
-
|
$983
|
|
|
Skeleton
Drive Unit with Ext. Shaft
|
-
|
$7,900
|
|
|
Lift
up Drive Unit (16 F.P.M.) 230/460/3/60 T.E.F.C. 3/4
H.P. Motor
|
325
|
$16,184
|
|
|
Lift
up Drive Unit (45 F.P.M.) 230/460/3/60 T.E.F.C. 1 1/2
H.P. Motor
|
335
|
$16,924
|
|
|
Drive
Unit with Ext. Shaft (16 F.P.M.)
|
-
|
$13,704
|
|
|
Drive
Unit with ext. Shaft (45 F.P.M.)
|
-
|
$14,181
|
|
Special |
Drive Unit (Non-Standard Speed Max. 90 F.P.M.) Variable
5:1 speed range when used
with the proper AC Inverter Control listed below |
- |
Consult Us |
|
NOTE:
All motors are 230/460 volts, 3 phase, 60 hertz, but inverters
require 230 volts, 3 phase input power. Check with us for other
current
characteristics. |
|
|
|
LUBRICATION
AND INSPECTION SECTION
|
|
The
proper lubrication of the conveyor chain is of paramount
importance not only to the successful operation of a conveyor
system, but to the life of the product as well. Proper lubricant
should be recommended by a qualified lubricating engineer who
has made a study of the processing machinery and atmospheric
conditions to which the system will be subjected. Special safe-
guards must be taken to protect the chain when it moves through
high temperatures, extremely low temperatures, acid conditions
such as bonderizing, alkaline washers, or other chemicals which
could reduce the life of the bearings and other parts. We caution
against the use of graphite based lubricants which tend to build
up excessive deposits of foreign matter unless the chain is
thoroughly cleaned at regular intervals. We urge the use of
our
sanitary hook in acid or paint spray conditions. |
|
 |
|
|
|
2035.02724
Automatic Timer
Controlled Lubricator
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
| No.
2035.02724 Automatic Timer Controlled Lubricator |
|
|
|
|
|
This
automatic timer controlled lubricator is designed to precisely
lubricate the critical bearing points of the conveyor chain.
It has
five nozzles, located to dispense lubricant on the vertical
and lateral
wheel bearings, vertical link pin and roller. Each nozzle has
its own
adjustable valve to control the amount of lubricant that is
dispensed.
It is equipped with a 168 hour adjustable timer which can be
set for
as little as 20 minutes out of 168 hours of conveyor operation. |
|
|
|
|
|
|
|
|
|
|
|
|
| No.
2035.00669 Electro-Brush Oiler |
|
|
|
|
|
The
illustration shows the brush type oiling device. The brush makes
contact with the chain, distributing the lubricant to the various
parts.
A 115 volt solenoid shut-off valve is provided at the bottom
of the
tank reservoir. |
|
|
|
|
|
|
Electro-Brush
Oiler
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
| No.
2035.00664 Brush Oiler |
|
|
|
|
|
The
brush oiler applies lubrication to the chain by gravity feed.
The
brush makes contact with the chain, distributing the lubricant
to the
various parts. A toggle shut off at the top of the reservoir
is provided.
NOTE: We do not recommend this oiler in finishing systems. |
|
|
|
|
|
|
|
|
|
|
|
|
| No.
2035.00820 Inspection Track Section |
|
|
|
|
|
|
The
inspection track section, formed out of this 3/16" track,
facilitates inspection and maintenance at points other than
the drive unit. It may be placed in any run of straight track.
This section is made with the top and sides open down to
the center of the chain. This allows for full inspection of
the
chain for proper lubrication, chain tension, and general
condition of the conveyor chain. The opening is covered
by a removable housing and is equipped with a handle. The
inspection section also permits easy installation and removal
of chain. The most desirable location is at the lowest point
between the output of the drive unit and the take-up unit.
The inspection section is furnished in a standard finish to
match the rest of the system. |
|
|
|
|
|
|
|
|
Brush
Oiler for Chain,
Manual Gravity Flow
|
|
|
|
|
|
|
|
|
 |
|
|
|
The
inspection section is used in all Zig-Zag, Twin-Trak,
and OveR-Way systems. In certain applications, such as
a large system, it may be desirable to use several inspection
sections. |
|
|
Inspection
Section
|
|
|
|
|
|
|
|
|
|
|
|
|
2035.02893
Lubricator for Chain
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
2035.02771
LUBRICANT, 5-GAL
|
|
|
|
|
|
|
|
2035.03050
Lubricant, 5 Gallon Container, High Temperature |
|
|
|
|
|
|
|
 |
|
|
|
|
|
The
2035.02771 Lubricant container size:
5 gallon. Recommended for use on conveyor
systems that are exposed to temperatures up
to 450 degrees F. |
The
2035.02893 Lubricator for Chain is
designed to precisely lubricate the critical
bearing points of the conveyor chain. The
lubricator has five ejector tubes to dispense
the lubricant into the vertical and horizontal
wheel bearings along with the vertical link
pin and roller.The unit has a micro-processor
to accurately control the amount of lubricant
that is dispensed. Pre-mounted onto a 2'-6"
long track section, has a 5.5 gallon reservior
with low level alarm, 120V at 1 Amp, no air
lines required. Lubricants sold separately. |
|
|
|
|
|
|
|
The
2035.03050 Lubricant, container size:
5 gallon. This lubricant is designed for use
with washer lines, liquid and powder paint.
Recommended for use on Zig-Zag system
that are exposed to temperatures up to 500
degrees F. |
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
PRICING
FOR LUBRICATION AND INSPECTION SECTION
|
|
Model No. |
Description |
Weight/lbs. (ea.) |
Price |
|
|
Brush
Type Oiler
|
13
|
$1,074
|
|
|
Electro
Brush Oiler, 120 Volt
|
14
|
$1,391
|
|
|
Brush
Only (for repair, all brush oilers)
|
0.2
|
$77
|
|
|
Automatic
Chain Pin and Wheel Lubricator w/115 Volt Timer for
Auto On-Off Control
|
55
|
$8,395
|
|
|
Inspection
Section
|
16.5
|
$367
|
|
|
Lubricant
- 5 gal - 180° Max LL
|
37
|
$670
|
|
|
Automatic
Chain Lubricator-Self Contained Mighty Lube
|
54
|
$8,547
|
|
|
Lubricant
- 5 gal - 180° Max ML
|
37
|
$657
|
|
|
Lubricant
- 5 gal - 450° Max SS-3
|
40
|
$672
|
|
|
|
2035 STANDARD
LOAD PENDANTS
|
 |
|
|
 |
|
|
We
have developed a series of standard load
carrying devices designed to cover the
essential requirements for connecting the load
to the conveyor chain. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Since
the ultimate device required to carry the
load on the conveyor must be specially de-
signed to fit the article which is being handled,
it is almost impossible to illustrate a load pen-
dant for every problem. It is also desirable in
many cases to experiment with various types
of load carriers before finding the one most
satisfactory for the job. |
|
 |
|
|
2035.00201
Long Pusher Lug
Assembly, Hold Back Dog
|
|
|
|
|
|
 |
|
The
2035.00201 Long Pusher Lug /
Hold Back Dog was primarily used
to limit the carriers momentum on
gravity feed and accumulation lines
for Twin-Track Power & Free con-
veyor systems. The function is to
provide the ability to accumulated a
series of carriers one behind the
other. Attach the Long Pusher Lug
/Hold Back Dog to the load pin on
the conveyor chain by rotating the
center plate, align the holes, insert &
tighten the fastener (not included).
Zinc plated finish; may be spaced on
multiples of 6". |
|
|
|
|
Almost
any type of load suspension fitting
can be attached to the 2035.00319 clevis
pendant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2035.00319
Standard Clevis Load
Pendants, Capacity 75 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
|
|
Pusher
Dog, Malleable Iron
|
|
Delatching
Pusher Dog Assembly
|
|
2035.02694
Rigid Clevis Pendant
|
The
2035.01155 Pusher Dog is composed of
a connecting bar with moveable flipper lugs
and two attachment pendants. The connect-
ing bar is attached to the conveyor chain
with the pendants, nuts, and cotter pins.
Furnished in a zinc plate finish. |
|
The
2035.01188 Delatching Pusher Dog
Assembly is composed of two pendants,
two side plates, two side plate spacers,
one hold- back flipper and one propelling
flipper. Parts are assembled in the field and
attached to the conveyor chain load pins
with hex bolts and lock nuts. Pendants are
zinc plate finish; flippers & side plates are
black oxide. |
The
2035.02694 Rigid Clevis Pendant
has a 75 lb load capacity and there is
an offset in the pendant sides, to allow
for a 1/2" gap. The rigid style of pen-
dant is used where swinging loads is
not permitted. The rigid pendant always
remains per- pendicular to the track.It
uses a scissor- like action to attach
directly to the load pin on the vertical
link of the conveyor chain. In the
closed position the pendant grips the
load pin reducing premature chain wear.
Zinc plated finish; may be spaced on
multiples of 6". |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
Part
2035.00318
|
|
Part
2035.00316
|
|
Part
2035.00317
|
|
Straight
Side Pendant
|
|
Rigid
Clevis Pendant
|
|
Rigid
Straight Side Pendant
|
The
Straight Side Pendant is similar to the
Standard Clevis Pendant except the pendant
sides are straight. It uses a scissor like
action to attach directly to the load pin on
the vertical link of the conveyor chain. The
pendant may be spaced on multiples of 6".
The pendant is furnished in a zinc plated
finish. This type of pendant is used where it
is permitted to have swinging loads. The
pendant is allowed to pivot, as the conveyor
makes elevation changes. |
|
The
Rigid Clevis Pendant is designed to
be used where a swinging load may be
objectionable. This pendant is similar to
the Rigid Straight Side Pendant except
there is an offset in the pendant sides
to allow for a 1/4" gap. The pendant may
be spaced on multiples of 6". The pendant
is furnished in a zinc plated finish. This
pendant always remains perpendicular to
the track. The pendant can be attached
to a load bar or directly to a product rack. |
|
The
Rigid Straight Side Pendant is similar
to the Rigid Clevis Pendant except the sides
are straight. It may be spaced on multiples
of 6". It attaches directly to the load pin
on the vertical link of the conveyor chain
and is furnished in a zinc-plated finish.
This pendant may be used where a swin-
ging load may be objectionable or not
permitted. The pendant always remains
perpendicular to the track. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
No.
2035.00264 Rigid
"V" Pendant
|
|
|
|
|
|
|
|
No.
2035.02706 Suspension
Indexing Load Hook
|
|
|
|
|
|
No.
2035.02775 Swivel Fixture
|
|
|
Capacity
75 lbs. Max.*
|
|
Capacity
75 lbs. Max.
|
|
|
|
Capacity
75 lbs.
|
|
|
|
This
fixture permits continuous rotation
of a product through a finishing operation
by permitting the ball-bearing roller to turn
against a continuous flat bearing strip,
through the turning area. |
|
Standard
offset of 8" as shown may be
increased on special order to 11" maximum
for vertical travel or any desired offset for
horizontal travel, and decreased to a min-
imum of 3 1/4". |
|
|
|
|
The
load hook illustrated above is used to
carry loads that must be indexed from time
to time by the operator at 90°. Bottom of
track to throat of hook 3/8". |
|
|
|
|
|
|
|
|
|
|
|
|
|
*Where
unit loads are less than 8 lbs
minimum preloading is recommended to
insure smooth rotation. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No.
2035.00257 DOUBLE
SUSPENSION LOAD HOOK
|
|
No.
2035.02772 DOUBLE SUSPENSION
LOAD BAR ASSEMBLY
|
|
No.
2035.02702 DOUBLE SUSPENSION LOAD HOOK ASSEMBLY
|
|
Capacity
150 lbs.
|
|
Capacity
150 lbs. per assembly
|
|
Capacity
150 lbs. per assembly
|
The
load is suspended from two vertical
load units increasing the capacity of the
load carrier. Standard clevis pendants are
attached to the conveyor chain on 6"
centers. The load hook revolves freely. |
|
By
suspending the load from two points
on the chain, the load carrying capacity is
increased. This pendant can be attached
to the conveyor chain on a minimum of
12" centers. The basic load bar assembly
provides a means of attaching a product
hook or clevis directly to the center hole. |
|
By
suspending the load from two points
on the chain, the load carrying capacity is
increased. This pendant can be attached to
the conveyor chain on a minimum of 12"
centers. The Load Hook assembly is used
for finishing applications where the load
must be manually indexed in 90°
increments. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
 |
|
|
|
|
|
2035.00198
Swivel
Fixture Pendant
|
97100.73
Spray Paint
12 Oz. Can, Pebble Tan |
|
No.
2035.02699 DOUBLE SUSPENSION
ROTATING STAR INDEXING PENDANT
|
|
|
The
2035.00198 Swivel Fixture Pendant
allows continuous rotation of a product
through a finishing operation by permitting
the ball-bearing roller to turn against a con-
tinuous flat bearing strip through the turning
area. 75 lb load capacity; 4-1/2" drop; zinc
plated finish and may be spaced on multiples
of 6". |
Size:
12 oz aerosol spray
can. Color: Pebble Tan.
NOTE: Paint creates a
textured finish. |
|
Capacity
150 lbs. for manual indexing
|
|
Distance
from bottom of track to throat of
hook is 8 7/8". This pendant can be used to
manually index or automatically index the
part. This pendant can be used with a
Rotating Cam or Continuous Rotating Cam,
permitting automatic rotation and indexing
in increments of 90°. The pendants and load
bar have a zinc plated finish while the hook
assembly is finished in Gloss-Tek powder
coat. This pendant is most commonly used
for finishing applications where it is neces-
sary to rotate the part. This pendant assem-
bly can be spaced on 6" increments with a
minimum of 12" centers. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
2035.02693
Indexing Load Hook Assembly,
with Cross Bar, 75 Lb. Capacity
|
|
No.
2035.00430 MULTIPLE SUSPENSION LOAD HOOK
|
|
Capacity
300 lbs.
|
The
2035.02693 Indexing Load Hook Assembly with Cross Bar
has a 75 lbs. capacity and is a two piece design with the rigid
pendant and cast hook assembly. The pendant may be spaced
on multiples of 6". The pendant has a zinc plated finish
and the
hook has a raw cast finish. |
|
By
suspending the load from four points on the chain, the
load carrying capacity is increased again. Standard clevis
pendants are attached at four points to each vertical link
pendant, and the load bar is free to swivel so that there will
be no binding action when going around curves. Bottom of
track to throat of hook is 9 1/16" |
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
PRICING
FOR 2035 STD LOAD PENDANTS
|
|
Model No. |
Description |
Weight/lbs. (ea.) |
Price |
|
|
Holdback
Dog
|
0.5
|
$50.58
|
|
|
Double
Suspension Load Hook
|
2
|
$92.01
|
|
|
"V"
Pendant-8" Drop (standard)
|
1.8
|
$81.18
|
|
|
Rigid
Clevis Pendant
|
0.5
|
$14.24
|
|
|
Rigid
Straight Side Pendant
|
0.5
|
$14.24
|
|
|
Straight
Side Pendant
|
0.5
|
$15.30
|
|
|
Standard
Clevis Pendant
|
0.5
|
$15.30
|
|
|
Multiple
Suspension Load Hook
|
9.5
|
$368.05
|
|
|
Holdback
Dog Spring
|
0.1
|
$13.39
|
|
|
Malleable
Iron Pusher Dog
|
3
|
$203.15
|
|
|
Rivet
for Holdback Dog
|
0.5
|
$2.34
|
|
|
Delatching
Pusher Dog
|
4
|
$242.25
|
|
|
Single
Suspension Indexing Load Hook Assembly
|
0.5
|
$118.15
|
|
|
Pendant
Assembly for Cast Hook
|
0.5
|
$36.55
|
|
|
Spin
Hook Pendant
|
0.5
|
$27.41
|
|
|
Double
Suspension Load Bar Assembly
|
2
|
$62.26
|
|
|
Double
Suspension Indexing Hook Assembly
|
3
|
$257.55
|
|
|
Double
Suspension Rotating Hook Assembly
|
1.5
|
$212.50
|
|
|
Single
Suspension Load Hook Assembly
|
0.5
|
$102.00
|
|
|
Swivel
Fixture Assembly
|
5
|
$34.21
|
|
|
Touch-Up
Paint (Pebble Tan) 12 oz. Spray Can
|
1
|
$17.00
|
|
|
|
INVERTED
CONVEYOR COMPONENTS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
2035.01220
Inverted
Rigid Pendant Assembly |
2035.02091
Inverted
Standard Pendant
|
2035.02817
Inverted Light
Duty Load Hook
|
2035.02818
Inverted
Heavy Duty Load Hook
|
The
2035.01220 Inverted Rigid
Pendant Assembly is a three-
piece investment cast design
which is rated for a 75 lb load
capicity. The two pendant halves
mate over the chain's axle and
load pin, and are secured with a
cast shoulder cap. Pendant is
designed to be used with con-
veyor chain and is normally used
in pairs, connected by a shoe
which carries the product hanger. |
The
2035.02091 Inverted Stand-
ard Pendant is a one-piece
investment casting which is rated
for a 75 lb load capicity for use
with standard conveyor chain
within Inverted Zig-Zag track.
Pivoting of the pendant provides
up to a maximum of 30 degrees in
an elevation change. |
The
2035.02817 Inverted Light
Duty Load Hook has a 4-1/2"
offset and a 12-5/16? drop that
can be used as a replacement
part on any Inverted Zig-Zag
Conveyor. Load capacity: 25 lbs. |
The
2035.02818 Inverted Heavy
Duty Load Hook has a 4-9/16"
offset and a 12-7/16? drop,
which can be used as a
replacement part on any
Inverted Zig-Zag Conveyor
system. Load capacity: 75
pounds. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
 |
|
|
|
|
|
2035.02334
Inverted Inspection Section
|
|
|
The
2035.02334 Inverted Inspection
Section is made from standard 7 GA track
and facilitates inspection and maintenance
at points other than the drive unit. For
easy access the section is made with the
top and sides of the track open, down to
the center of the chain. This allows for full
inspection of the chain for proper lubrica-
tion, chain tension, and general condition
of the conveyor chain. Opening housings
can be unbolted from body. Section also
permits easy installation and removal of
chain and may be located in any straight
run of track, with most desirable location
at the lowest spot between the output of
the drive unit and the take-up. Finished
with powder coating. |
2035.02128
Inverted
Screw Take-up Package |
|
2035.02328
Inverted Air
Take-up Fittings Package
|
|
The
2035.02128 Inverted Screw Take-
Up Package removes chain slack by
manually adjusting the threaded rod
at the inverted curves. Normally used
with standard 2'-0" radius inverted
curves, or can be used where the track
spread is greater than 4'-0" (up to a
14'-0" max.). The 90° curves are not
included and must be ordered sep-
arately. The components are finished
with powder coating. |
|
The
2035.02328 Inverted Air Take-up Package
has two air cylinders that automatically move
the inverted curves to remove slack from the
system chain. Used with standard 2'-0" radius
inverted curves, or where track-spread is
greater than 4'-0" (up to a 14'-0" max.). The 90°
curves are not included and must be ordered
separately. Includes tubing, fittings, regulator
with gauge and shut-off valve and is finished
in powder coating. |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
|
|
|
| 2035.02760
Inverted Lubricator for Chain |
|
2035.02815
Inverted Drive Unit, 16 FPM, 3/4 HP
|
The
2035.02760 Inverted Lubricator for Chain has a
self-contained 2 gallon reservoir, and is controlled
by a programmable relay inside the electrical panel.
Control can be set for ON (Lubricating) and OFF
(Non-Lubricating). Lubricator has six (6) nozzles,
strategically located to dispense lubricant to the
vertical and lateral wheel bearings along with the
vertical link pin and roller. The air inlet pipe size is
1/4" N.P.T. Minimum of 60 PSI is required
for the lubricator to function properly with lubri-
cants up to 30W. Power requirement: 110-130V AC
50/60 Hz, 1 amp service. |
|
The
2035.02815 Inverted Drive Unit, 16 FPM, 3/4 HP inverter duty
motor (208/230/480-3P), motor, reducer, and clutch are connected
with sprockets and roller chain to the head shaft, which drives
the
caterpillar chain. Adequate protection is provided for reasonable
momentary overloads, and a friction clutch provides for protection
against excessive overload. Finished with powder coating. |
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
PRICING
FOR INVERTED CONVEYOR COMPONENTS
|
|
Model No. |
Description |
Weight/lbs. (ea.) |
Price |
|
|
Inverted
Pendant - Rigid Type
|
0.9
|
$113.90
|
|
|
Inverted
Pendant - Standard Type
|
0.5
|
$30.18
|
|
|
Load
Hook, Inverted - Light Duty 18" Lg.
|
1.5
|
$125.80
|
|
|
Load
Hook, Inverted - Heavy Duty 18 1/2" Lg.
|
4
|
$353.60
|
|
|
Horizontal
Curve 1'-6" R x 90 HD, Inverted
|
12
|
$459.85
|
|
|
Horizontal
Curve 2'-0" R x 90 HD, Inverted
|
15
|
$502.35
|
|
|
Horizontal
Curve 3'-0" R x 90 HD, Inverted
|
24
|
$543.15
|
|
|
Inverted
Screw Take-Up Fittings
|
80
|
$2,434.40
|
|
|
Inverted
Air Take-Up Fittings
|
85
|
$5,525.00
|
|
|
Inverted
Inspection Section
|
16
|
$690.20
|
|
|
Inverted
conveyor Chain Lubricator - PLC
|
40
|
$14,911.55
|
|
|
Inverted
Drive Unit 16 FPM, 3/4 HP
|
305
|
$13,117.20
|
|
|
Inverted
Drive Unit 45 FPM, 1-1/2 HP
|
315
|
$13,603.40
|
|
|
Inverted
Track Bracket
|
3
|
$81.18
|
|
|
|
|
PRICING
FOR CONVEYOR SYSTEM CONTROL PANELS
|
|
Model No. |
Description |
Weight/lbs. (ea.) |
Price |
|
|
Basic
Control Panel, NEMA #12, Single Drive NEMA #12 Enclosure
Approx. 20" x 8: x 20" 2/Main Power Supply
disconnect; External Mounted Start-Stop Push Button,
E-Stop, A-B Component Touch Screen OI; Internally Mounted
A-B Powerflex 525 Drive Control& A-B Micro 800 PLC.
|
95
|
$32,540.56
|
|
|
Control
Panel, NEMA #12, Single Drive, 3/4 HP to 2 HP
|
100
|
$52,587.80
|
|
|
Control
Panel, NEMA #12, Dual Drive, 3/4 HP to 2 HP
|
112
|
$58,995.10
|
|
Single
and Dual Drive Control Panels - NEMA #12 Enclosure (24"
x 24") with Main Power Supply Disconnet;
Externally Mounted and Wired Warning Horn, Tower Light, E-Stop
Push Button, Operator Interface Terminal;
Internally Mounted Micrologix 1200 PLC, VFD, Terminals for External
Devices; Control Functions include:
Speed Adjustment, Motor Jog, Lubricator enable/disable, System
Status; Load Sharing (Dual Drive) is achieved
thru Parameter Adjustment of Load and Slip Compensation Settings
on VFD's. |
|
|
HORIZONTAL
TRACTION WHEEL TURNS
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
2035.02012
Traction Wheel Turn, 2'-0" Diameter
|
|
2035.02010
Traction Wheel Turn, 3'-0 Diameter
|
The
2035.02011 Traction Wheel is made from a solid plate wheel,
attached to a section of half track forming the inside track
lip. This
wheel rotates around a graph alloy hub and shaft. The non-
rotating half track is formed to match the standard track profile.
The assembly is mounted to a rigid frame for easy installation.
The Traction Wheel is finished with powder coating. |
|
The
2035.02010 Traction Wheel is made from a solid plate wheel,
attached to a section of half track forming the inside track
lip.
The wheel rotates around a graph alloy hub and shaft. The non-
rotating half track is formed to match the standard track profile.
The assembly is mounted to a rigid frame for easy installation.
The Traction Wheel is finished with powder coating. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
|
|
|
|
PRICING
FOR HORIZONTAL TRACTION WHEEL TURNS
|
|
Model No. |
Description |
Weight/lbs.
(ea.) |
Price |
| 2035.02012 |
Traction
Wheel Turn 24" Dia. X 180° |
100 |
$4,273
|
| 2035.02011 |
Traction
Wheel Turn 30" Dia. X 180° |
130 |
$4,407
|
| 2035.02010 |
Traction
Wheel Turn 36" Dia. X 180° |
160 |
$5,537
|
|
|
|
|
|
|
|
|
PRICING
FOR DRIVE ADDITIONS
|
|
|
|
2035.01371
|
2035.01372
|
|
|
Explosion
Proof Motor |
Add |
$3,570
|
$3,570
|
|
|
Motor
Brake |
Add |
$4,047
|
$4,047
|
|
|
Clutch
Brake |
Add |
$6,903
|
$6,903
|
|
|
Conveyor, Enclosed
Track Conveyors, Overhead Conveyors, Overhead Power Chain
Conveyor, Safe-Rail, Conveyors, and Zig-Zag
rom your source for material handling equipment.
|
Back to Product Page
|
| HOME /
ORDER / SEARCH
/
QUOTE /
CONTACT US / ABOUT
US /
MY ACCOUNT/
SHOPPING CART |
|
