Back to Product Page
|
WIDE
SPAN MEZZANINE
|
|
|
|
|
|
|
|
Most
cost efficient design for larger areas
where longer distances between columns
are necessary!!
|
 |
|
|
|
|
 |
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
*
Pre-fabricated & Pre-engineered *
Meet AISC & ASTM standards
* Fewer columns *
Increase valuable floor space *
Capacity as needed
*
Quality engineered to your exact needs *
Clear spans as required |
|
|
NEW!
Optional Finishes!
Our
standard finish is a quick dry polyester powder coated in
a variety of colors.
Now we are pleased to offer our products with a hot-dipped
galvanized finish.
|
|
DECK
SURFACES AVAILABLE:
|
|
*
11/8” TONGUE & GROOVE PLYWOOD
* INTERLOCK STEEL GRATING
* 3/4” PLYWOOD OVER ROOF DECKING
* BAR GRATING
* STEEL FLOOR PLATE OVER ROOF DECK
* SPECIALS TO MEET YOUR NEEDS |
|
|
|
|
|
|
|
|
INCREASE
VALUABLE FLOOR SPACE
|
|
|
|
|
WE
MANUFACTURE SPACE
|
|
|
|
|
|
 |
|
| Need
a Quote to your Specifications? |
 |
|
|
|
DESIGN
DETAILS
|
 |
|
| Need
a Quote to your Specifications? |
|
|
|
|
|
|
ARCHITECTURAL
SPECIFICATIONS
|
|
|
|
|
DESCRIPTION
|
|
|
|
•
DECK SURFACE TO BE: (as selected)
• LIVE LOAD CAPACITY IS:
(specify-150# very common) PSF
• DECK HEIGHT ABOVE FLOOR
IS: (specify) FEET
• MEZZANINE UNDERCLEARANCE
IS: (specify) FEET
•MEZZANINE WIDTH IS: (specify) FEET
• MEZZANINE LENGTH IS:
(specify) FEET
• COLUMN CENTERS ACROSS
WIDTH DIMENSIONS ARE: (specify)
FEET
• COLUMN CENTERS ACROSS
LENGTH DIMENSIONS ARE: (specify)
FEET |
|
•
STEEL FRAMEWORK TO BE PAINTED: (blue frame,
gray
joists or other option)
• RAILINGS, MIDRAIL &
4 INCH HIGH KICKPLATE
PROVIDED ON: (areas
indicated)
(Specify #) DROP GATES PROVIDED
(Specify #) SWING GATES PROVIDED
• MEZZANINE IS TO BE SUPPLIED
WITH: (specify #)
STAIR LANDINGS
• SPECIFY NUMBER OF STAIRS
PROVIDED IS: (Specify #)
INTERNAL STAIRS PROVIDED |
|
|
|
|
GENERAL
DESIGN SPECIFICATIONS
|
|
|
|
1.
Mezzanine shall be a Stor-Deck wide span mezzanine
designed and manufactured by FS Industries, PO Box 72659
Providence, RI 02907.
2. Mezzanine shall be designed and manufactured
to conform to or exceed the requirements of the Occupational
Safety
and Health Administration (OSHA).
3. Mezzanine shall be free standing with wall ties
and/or sway braces provided to preclude lateral sway.
4. Approval drawings of framing plan and deck plan
shall be submitted to the owner or to owner’s representative
prior
to fabrication.
5. Installation drawings and component descriptions
shall be provided and included with shipment.
6. Columns shall be predrilled square structural
tubing which is manufactured to Fy = 47 ksi under ASTM A500,
grade B. Design to be in accordance
with AISC manual of steel construction. Footplates shall be
welded to columns
and provided with four bolt holes
for rigid fastening to floor.
7. Framing members shall be American standard structural
shapes as manufactured in ASTM specification A6-79B.
Design to be in accordance with
AISC manual of steel construction. All intermediate deck support
joists shall be
designed and manufactured to
conform to the Steel Joist Institute (SJI) standard specifications
for open web steel
joists. The deflection under
rated load shall be limited to span /240 or (1/240). All structural
members shall be
provided with predrilled welded
end plates to allow easy bolted assembly. All ends of framing
members shall be
fastened with 1/2” diameter
grade A325 bolts.
8. Deck shall be constructed as follows:
A) STEEL GRATING: Deck shall be
18 gauge by 12” wide by 1 1/2” high galvanized steel
interlocking channels as
specified
in ASTM designation A525. The surface pattern shall provide
at least 35% open area and no more than
42% open
area. Openings shall be at least 10 1/2” long and no more
than 3/4” wide. The surface shall be anti-
skid with self
cleaning, sole-gripping dimples.
B) PLYWOOD: Deck shall be 1 1/8”
thick APA grade plywood. Each plywood panel is to be tongue
& groove all
four
sides to allow joints to occur in unsupported locations. Plywood
deflection shall be limited to 1/240 of span
in accordance
with APA rated sheathing PS-1.
C) BAR GRATING: Deck shall be
rectangular welded bar grating type WB size 3 made with 1”
x 1/8” bearing
bars
at 1 3/16” centers and twisted square cross bars at 4”
centers. Material shall be steel A-569. Finish to be
one shop
coat black paint.
D) ROOF DECKING: Deck shall be
18, 20 or 22 gauge type B roof deck 1 1/2” high under 3/4”
APA grade
plywood
with tongue & groove on two long edges of each sheet. Roof
deck shall be made from steel
conforming to
ASTM designation A-611. Deck deflection under live load shall
not exceed 1/240 of the span.
Roof
deck finish to be white shop coat primer paint.
9. Stairs & Railings: All stairs, landings,
handrails and kickplates shall be manufactured to conform to
OSHA or
BOCA requirements as
requested. Stair treads shall be supplied in material and size
consistent with usage and
stair design selected. Stair
treads shall carry a minimum concentrated live load of 1000
pounds in center of tread.
10. Finish: All steel structural members shall have one shop
coat of spray of polyester powder coated. |
| Need
a Quote to your Specifications? |
|
|
|
Industrial Mezzanines,
Mezzanine, Mezzanines, Modular Mezzanines, Pre Fab Mezzanine,
Prefabricated Mezzanine,
Steel Mezzanine, Storage Mezzanine, Storage Platforms, Structural
Mezzanine, and Wide Span Mezzanines from your
complete source for material handling equipment.
|
Back to Product Page
|
