LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

WB100-WALL BRACKET JIB CRANE

200° ROTATION PERFORMANCE WALL BRACKET JIB CRANES

THE ECONOMICAL SOLUTION wb100 wall bracket jib crane
The Wall Bracket (WB100) jib is the most
economical means of providing hoist coverage
for individual use in bays, along walls or
columns of plants, or as a supplement to an
overhead crane or monorail system.
Two key requirements must be met before
applying the Wall Bracket Series:
1. A Structurally adequate wall or column to
    support the jib must exist.
2. Sufficient clearance above the boom throughout
    its arc to accommodate the tie rod suspension
    must exist.
EASE OF MOVEMENT
*Low dead weight of the boom combined with bronze
   bushings and oil-impregnated bronze thrust washers
   provides for easy rotation and superior load
   positioning.
top bracket fitting
SAFETY
*Formed bracket fittings provides for greater reliability. No welds in tension, all bolts
   are in double shear.
*Pre-engineered for use with powered hoists. A factor of 15% of the jib crane capacity
   is allowed for the hoist and trolley weight with an additional 25% of the capacity
   allowed for impact, thus giving maximum capacity use of the jib.
TOP BRACKET FITTING
EASE OF INSTALLATION
*Single tie rod, right hand threaded, at both ends for easy boom
  adjustment and installation.
beam bracket fitting
*All connections bolted, including movable bolted, trolley stops.
bottom bracket fitting
*Grease fittings are provided for easy field lubrication.
BEAM BRACKET
FITTING
BOTTOM BRACKET
FITTING
thrust and pull diagram thrust and pull diagram
THE THRUST AND PULL DIAGRAM
Fittings are available for fabrication of cranes locally.

WB-100 WALL BRACKET DRAWING AND DIMENSIONS
CHART 1B - Boom Data
STANDARD BOOM DATA
Boom
Height (W)
Beam Size Flange
Width (in)
6" W6@12#/ft. 4"
8.125" W8@18#/ft. 5-1/4"
10.33" W10@26#/ft. 5-3/4"
12.5" W12@35#/ft. 6-1/2"
16.125" W16@45#/ft. 7"
18" W18@50#/ft. 7-1/2"
21" W21@62#/ft. 8-1/4"
24.125" W24@84#/ft. 9"
wall bracket drawing and dimensions
C = Cap Channel Length
TC (trolley coverage (distance
between endstops)) = Span - (E + 2 1/2")
ALL DIMENSIONS ARE IN INCHES.
HARDWARE FOR DETAIL "A" BY OTHERS
  E F G J (Hole Dia.) J (Bolt Dia.) K (Hole Dia.) K (Bolt Dia.) BT
WB-G1 13 1/2" 3 1/2" 3 1/2" 11/16" 5/8" 9/16" 1/2" 1/2"
WB-G2 13 1/2" 4" 4 1/8" 13/16" 3/4" 11/16" 5/8" 5/8"
WB-G3 14" 4" 4 5/8" 13/16" 3/4" 11/16" 5/8" 3/4"
WB-G5 15 1/4" 6" 7" 1 5/16" 1 1/4" 13/16" 3/4" 1"
wall bracket drawing and dimensions

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING
Cap.
Tons
A
Span
Model Number Bracket
Centers
B
F D Threaded
Tie Rod
Length
Tie
Rod
Dia.
Tie
Rod
Pitch
Cap
Channel
Lengths
Thrust
and
Pull (lb.)
Approx.
Ship
Wt. (lb)
Price








1/2
8' WB100-G1-8-6 2'9" 3-1/2" 1'3" 5'-10 1/4" 1" 8unc - 3709 265
$1,495
10' WB100-G1-10-6 3'0" 3-1/2" 1'6" 7'-7 1/4" 1" 8unc - 4408 300
$1,570
12' WB100-G1-12-6 3'9" 3-1/2" 1'9" 9'-6" 1" 8unc - 4347 335
$1,684
14' WB100-G1-14-6 4'6" 3-1/2" 2'0" 11'-4 3/4" 1" 8unc - 4317 375
$1,726
16' WB100-G1-16-6 5'6" 3-1/2" 2'0" 13'-7 1/2" 1" 8unc - 4109 410
$1,872
18' WB100-G1-18-7 6'0" 3-1/2" 2'0" 15'-8" 1" 8unc - 4380 495
$1,990
20' WB100-G1-20-8 6'6" 3-1/2" 2'3" 17'-5 1/2" 1" 8unc - 4658 600
$2,256
22' WB100-G1-22-8c8 7'0" 3-1/2" 2'3" 19'-6 1/4" 1" 8unc 18'9" 5130 905
$2,816
24' WB100-G1-24-8c8 7'6" 3-1/2" 2'6" 21'-4" 1" 8unc 20'6" 5350 975
$2,909
26' WB100-G1-26-10c6 8'0" 3-1/2" 2'6" 23'-4 1/2" 1" 8unc 22'6" 5795 1230
$3,459
28' WB100-G1-28-10c6 9'0" 3-1/2" 3'0" 25'-1 1/4" 1" 8unc 24'0" 5663 1315
$3,588
30' WB100-G1-30-12c8 10'0" 3-1/2" 3'6" 26'-10" 1" 8unc 25'6" 6009 1710
$4,185

 

 

 


1

8' WB100-G1-8-6 2'9" 3-1/2" 1'3" 5'-10 1/2" 1" 8unc - 7273 265
$1,495
10' WB100-G1-10-6 3'0" 3-1/2" 1'6" 7'-7 1/4" 1" 8unc - 8608 300
$1,524
12' WB100-G1-12-6 3'9" 3-1/2" 1'9" 9'-6" 1" 8unc - 8453 335
$1,684
14' WB100-G1-14-7 4'6" 3-1/2" 2'0" 11'-4 3/4" 1" 8unc - 8422 415
$1,784
16' WB100-G1-16-7 5'6" 3-1/2" 2'3" 13'-4 1/2" 1" 8unc - 7992 455
$1,939
18' WB100-G1-18-8 6'0" 3-1/2" 2'6" 15'-2 1/4" 1" 8unc - 8430 555
$2,068
20' WB100-G1-20-10 6'6" 3-1/2" 2'6" 17'-2 1/4" 1" 8unc - 8966 745
$2,396
22' WB100-G1-22-10c6 7'0" 3-1/2" 2'9" 19'-0 1/4" 1" 8unc 18'3" 9562 1065
$3,139
24' WB100-G1-24-10c6 7'6" 3-1/2" 2'9" 21'-1" 1" 8unc 20'3" 9877 1150
$3,246
26' WB100-G1-26-10c6 8'0" 3-1/2" 3'0" 22'-10 3/4" 1" 8unc 22'0" 10170 1230
$3,459
28' WB100-G1-28-12c8 9'0" 3-1/2" 3'6" 24'-7 1/4" 1" 8unc 23'6" 10286 1610
$3,951
30' WB100-G1-30-12c8 10'0" 3-1/2" 3'6" 26'-10" 1" 8unc 25'6" 10069 1710
$4,185

 

 

 


2

8' WB100-G2-8-8 2'9" 4" 1'3" 5'-11 1/4" 1.5" 6unc - 14469 375
$2,075
10' WB100-G2-10-8 3'0" 4" 1'6" 7'-8 1/4" 1.5" 6unc - 17107 435
$2,138
12' WB100-G2-12-8 3'9" 4" 1'9" 9'-7" 1.5" 6unc - 16780 495
$2,187
14' WB100-G2-14-8 4'6" 4" 2'0" 11'-5 3/4" 1.5" 6unc - 16578 550
$2,318
16' WB100-G2-16-10 5'6" 4" 2'3" 13'-5" 1.5" 6unc - 15864 720
$2,689
18' WB100-G2-18-10 6'0" 4" 2'3" 15'-5 3/4" 1.5" 6unc - 16552 795
$2,774
20' WB100-G2-20-12 6'6" 4" 2'6" 17'-3 1/4" 1.5" 6unc - 17348 1000
$3,139
22' WB100-G2-22-12c8 7'0" 4" 2'6" 19'-4" 1.5" 6unc 18'6" 18297 1420
$3,740
24' WB100-G2-24-12c8 7'6" 4" 3'0" 20'-11" 1.5" 6unc 20'0" 18836 1535
$3,892
26' WB100-G2-26-12c8 8'0" 4" 3'6" 22'-6" 1.5" 6unc 21'6" 19329 1650
$4,131
28' WB100-G2-28-12c8 9'0" 4" 3'6" 24'-8 1/2" 1.5" 6unc 23'6" 18686 1760
$4,267
30' WB100-G2-30-12c8 10'0" 4" 3'0" 27'-4 3/4" 1.5" 6unc 26'0" 18189 1895
$4,844

 

 

 


3

8' WB100-G3-8-8 2'9" 4" 1'3" 5'-11 1/2" 1.5" 6unc - 21596 435
$2,763
10' WB100-G3-10-8 3'3" 4" 1'6" 7'-9 1/4" 1.5" 6unc - 23545 490
$2,786
12' WB100-G3-12-10 4'0" 4" 1'9" 9'-8" 1.5" 6unc - 23557 630
$3,024
14' WB100-G3-14-10 4'9" 4" 2'0" 11'-6 3/4" 1.5" 6unc - 23514 700
$3,106
16' WB100-G3-16-12 5'6" 4" 2'3" 13'-5 1/2" 1.5" 6unc - 23500 765
$3,287
18' WB100-G3-18-12 6'3" 4" 2'3" 15'-6 3/4" 1.5" 6unc - 23672 950
$3,521
20' WB100-G3-20-12c8 7'0" 4" 2'6" 17'-5 1/2" 1.5" 6unc 16'6" 24037 1340
$4,190
22' WB100-G3-22-12c8 7'9" 4" 2'6" 19'-7 1/4" 1.5" 6unc 18'6" 24113 1450
$4,322
24' WB100-G3-24-12c8 8'6" 4" 3'0" 21'-3 1/4" 1.5" 6unc 20'0" 24197 1565
$4,584
26' WB100-G3-26-12c8 9'3" 4" 3'0" 23'-4 3/4" 1.5" 6unc 22'0" 24285 1940
$4,805
28' WB100-G3-28-12c8 10'0" 4" 3'0" 25'- 6 1/2" 1.5" 6unc 24'0" 24377 2065
$5,035
30' WB100-G3-30-12c10 11'0" 4" 3'0" 27'-9" 1.5" 6unc 26'0" 23917 2185
$5,185

 

 

 


5

8' WB100-G5-8-12 3'0" 6" 1'6" 5'-9 3/4" 2" 4.5unc - 33006 780
$5,343
10' WB100-G5-10-12 3'3" 6" 1'6" 7'- 9 1/2" 2" 4.5unc - 39258 860
$5,450
12' WB100-G5-12-12 4'0" 6" 1'9" 9'-8 1/4" 2" 4.5unc - 39072 940
$5,639
14' WB100-G5-14-12c8 4'9" 6" 2'0" 11'-7" 2" 4.5unc - 38972 1020
$5,755
16' WB100-G5-16-W16 5'6" 6" 2'6" 13'-2 1/4" 2" 4.5unc - 39229 1314
$6,164
18' WB100-G5-18-W16 6'3" 6" 3'0" 14'-10 1/4" 2" 4.5unc - 39246 1423
$6,291
20' WB100-G5-20-W16 7'0" 6" 3'6" 16'-6 1/4" 2" 4.5unc 15'3" 39877 1797
$6,840
22' WB100-G5-22-W16c12 7'9" 6" 3'6" 18'-7 3/4" 2" 4.5unc 17'3" 39987 1931
$6,988
24' WB100-G5-24-W16c12 8'6" 6" 3'6" 20'-9 1/2" 2" 4.5unc 19'3" 40108 2065
$7,252
26' WB100-G5-26-W16c12 9'3" 6" 3'6" 22'-11" 2" 4.5unc 21'3" 40239 2200
$7,351
28' WB100-G5-28-W16c12 10'0" 6" 3'6" 25'-0 3/4" 2" 4.5unc 23'3" 40375 2749
$10,620
30' WB100-G5-30-W16c12 11'0" 6" 3'6" 27'-3 1/2" 2" 4.5unc 25'3" 39597 2898
$10,900

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


WALL BRACKET KITS
If you are ordering a complete crane model above, you do not need to order a wall cantilever kit as well.
Kits are used if you are buying your own I-beam and fabricating the crane yourself.
The wall bracket kits consist of a top wall bracket, bottom wall bracket, and a beam bracket. The two (2) wall bracket
fittings have bronze thrust washers and bronze bushings with grease fittings. The top wall bracket and beam bracket
include a tie rod clevis.
The kits are available for one-half (1/2) ton, one (1) ton, two (2) ton, three (3) ton, and five (5) ton capacity WB100
Series Jib cranes, for spans ranging from 8' to 30'. A tie rod (not included) is used with these fittings.
FITTING KIT
Tie Rod
Dia.
*Tie Rod Price (Min. chg. of $101)
1"
$111 + $8.49/lin. ft.
1-1/2"
$98 + $13.50/lin. ft.
1-1/2"
$98 + $13.50/lin. ft.
2"
$98 + $22.98/lin. ft.
Cap.
Tons
Model No. Weight
(lbs.)
Price
1/2, 1 WB-G1 111
$881
2 WB-G2 133
$1,206
3 WB-G3 194
$1,736
5 WB-G5 425
$4,377
Hardware
Kit No.
Weight
(lb.)
Price
50017 4
$40.00
50018 10
$71.70
50019 10
$76.70
50020 22
$98.40
*Rnd. to nearest ft.
Standard: Non-painted
The hardware kit consists of hardware required to connect (a) the lower bracket and the end of beam bracket to the
S-Beam and (b) the hex nuts and lock washers to attach the tie rod to the clevis assemblies.
DIMENSIONS BETWEEN BRACKETS MUST BE HELD TO THAT GIVEN IN OUR WB100 SERIES
CHART. We are not responsible for deviation from above capacity and span recommendations, variance
from our recommended limitations between brackets, overloading, or incorrect installation of crane.

Wall Bracket Jib Crane, Cranes, Articulating Jib Cranes, Gorbel Jib Cranes, Jib Cranes, Gorbel Cranes, Hoist, and Jib Booms from
your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART