LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

Rolled Section Clamps

CG Girder Turning Clamps
Working Load Limit: 250 to 13,200 lbs
CG Clamps can lift and turn girders through 90º and are designed to meet the
requirements of the heavy steel industry. They are general purpose clamps and
can be used on rolled steel joists, beams, and fabrications up to a surface hardness
of 300 Brinell (32HRc).
Features:
• Can be used on beams, fabrications, channels and rolled steel joists
• Can lift and turn beams up to 90º and are designed to land the beam in either the
   vertical or horizontal position.
• Fitted with a cam/spring-operated safety lock
• Incorporates a positive lock onto one of the uppermost edges, which will allow
   the beam to be set down with the flange vertical
• For long girders, fabrications and welded structures, two clamps and a lifting
   beam may be required

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


CG Heavy Duty Girder Turning Clamp Prices
Product
Code
Working Load
Limit
Jaw
Capacity
Dimensions (inches)
Weight
Price
Min
Max
A
B
C
D
E
F
G
H
I
250 lbs
2200 lbs
0 to 5/8"
8.307
3.543
1.969
0.512
1.693
10.354
2.52
13.78
13.268
13.2 lbs
$768
450 lbs
4400 lbs
0 to 1-1/4"
11.417
5.512
3.15
0.787
2.362
12.48
3.937
18.307
17.126
30.9 lbs
$1,003
900 lbs
8800 lbs
0 to 1-1/4"
11.417
6.339
3.504
0.787
3.031
12.835
4.252
20.591
18.976
41.9 lbs
$1,364
1350 lbs
13200 lbs
7/16 to 2"
13.268
6.732
3.504
0.984
4.055
14.764
5.709
21.693
20.63
81.6 lbs
$1,761

Type TTR Girder Clamps
Back to Previous
The TTR clamps can be used on girders and rolled steel joists up
to a surface hardness of 300 Brinell (32HRc). This range of clamps
has been developed for handling structural beams with the flange in
a vertical position, or "H" position. Girders can be lifted and stacked
horizontally. The hook rings are designed to be as a near to the center
of gravity as possible, resulting in a near horizontal lift. For short
beams a single clamp can be used. For longer beams, two clamps
should be used in combination with a lifting beam. Various sizes and
lifting capacities are available. The TTR is a versatile tool for
transporting girders and joists. This clamp is fitted with a cam
operated locking mechanism.
Features:
• Used to lift and transport structural beams up to a
   surface hardness of 300 Brinell (32HRc) with the
   flanges in the up right position
• Available in capacities up to 3 tons
• Jaw capacities available up to maximum of 1-1/8"
• Short beams may be lifted with a single clamp,
   longer beams should use 2 clamps and a spreader
   beam
• Repair centers available to service your products
• Replacement parts available for clamps
• No special tools required for repairs
clamps

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


TTR Girder Clamp Prices
Model No.
Working Load Limit
Flange
Size
Dimensions (inches)
Weight
Price
Min
Max
A
B
C
D
E
F
90 lbs
1600 lbs
1/4 to 5/8"
5.375
7.5
2
1.75
2.375
3.5
7.7 lbs
$1,055
350 lbs
3300 lbs
1/4 to 1"
7.5
10.625
2.625
2.625
3
4.875
22 lbs
$1,202
700 lbs
6600 lbs
1/4 to 1"
8.25
9.875
3.5
2.625
3.375
5
26.5 lbs
$1,659
*Note: Not stocked.
Adjustable Beam Clamps, Beam Clamp, Beam Clamps, I Beam Clamp, Lifting Clamp, Locking Clamp, Locking Clamps, Plate
Clamp, Plate Clamps, Plate Lifting Clamps, Screw Clamp, and Screw Clamps from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART