Quilted
Fiberglass Wall Panels (QFM)
|
|
|
|
|
|
|
QFM
combines both noise barrier performance and efficient sound
absorption. Lightweight, semi-flexible, easy-to-handle; this
material
is a vinyl coated, gray colored fiberglass facing cloth which
is
quilted to a supporting 2 lb./cubic foot density fiberglass. |
|
|
|
|
As
a semi-flexible barrier enclosure, QFM's absorption properties
help to control reverberant energy inside an area. |
|
|
|
|
Since
QFM does not accordion fold, it should be considered as a
suspended barrier in areas requiring infrequent access. |
|
|
|
|
QFM
is available in 1" or 2" thick rolls, faced on one
or both sides,
or as prefinished panels. |
|
|
|
|
|
Up to 21 dBA reduction, depending on the noise source
|
|
|
Rated Class 1 building material per ASTM E-84 Tunnel Test
for flammability |
|
|
Attractive metallic gray color enhances area lighting |
|
|
Tough, permanent outer shell is resistant to oil, grease and
mildew; can be wiped clean |
|
|
|
|
Prefinished
Panels
|
|
|
|
|
All
panels are 4 ft. wide with 4, 6, 8 & 10 ft. standard heights.
Custom heights also available. Panels have bound
edges, double grommets 18" off center along vertical panels
edges for fastening adjacent panels together, and
grommets 12" off center along top for hanging. |
|
|
|
|
SC-122
is primarily intended for use as a wall blanket absorber, with
facing on one side only. Adjacent panels
overlap through grommets or optional Velcro |
|
|
|
|
SC-124
is constructed of two layers of SC-122 bound back-to-back. The
top and two sides are grommeted for
easy suspension from GLIDE WALL hardware or other supports.
Adjacent panels overlap through grommets
or optional velcro. |
|
|
|
|
SC-125
is constructed of two layers of SC-122 bound back-to-back, but
with the extra benefit of a 1.0 lb./square
foot loaded vinyl septum barrier. The top and two sides are
grommeted for easy suspension from GLIDE WALL
hardware or other supports. Adjacent panels overlap through
grommets or optional velcro. |