Back to Product Page
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
|
|
|
|
|
New
plastic bench seating. Can be mounted to
patio or choose a concrete base. Can be used
indoors or outdoors. Flexible, durable, and UV
stable. |
 |
|
|
|
|
Size:
37" x 17" x 18" H
Weight: 35 Lbs.
Material: Plastic
Anchoring: 2 Mounting brackets
Options: Concrete plug
Features: Flexible
Durable
UV
Stable |
|
|
|
|
|
|
Model:
2402
Price: $212.30 |
Model:
7127
Price: $161.50 |
|
|
|
|
AVAILABLE
PLASTIC COLORS
|
|
 |
|
|
Available Colors for Concrete Base
|
|
 |
|
|
DRAWING
|
 |
|
|
HYPEL™
LLDPE 3170 UV 8 NATURAL ** LINEAR LOW DENSITY POLYETHYLENE,
7.0 MFI
|
|
|
TYPICAL
PROPERTY VALUES†
|
|
|
PROPERTY
|
METHOD
|
UNIT
|
VALUE
|
| PHYSICAL |
| Specific
Gravity |
ASTM
D792
|
|
0.935
|
| Metal
flow (190°C / 2.16 kg) |
ASTM
D1238
|
g/10
min
|
7
|
| MECHANICAL
@ 73°F |
| Tensile
Strength at Yield |
ASTM
D638
|
psi
|
2720
|
|
MPa
|
18.8
|
| Flexural
Modulus - 1% Secant |
ASTM
D790
|
psi
|
100,000
|
|
MPa
|
655
|
| ARM
Impact 1/8" (Notched) @-40°C |
ASTM
D562B
|
ft-lb/in
|
79
|
| Hardness
(Shore D) |
ASTM
D785
|
-
|
-
|
| THERMAL |
| 264
psi - ASTM, 1.80 MPa-ISO |
ASTM
D648
|
°C
|
35
|
|
°F
|
95
|
| 66
psi - ASTM, 0.45 MPa-ISO |
ASTM
D648
|
°C
|
52
|
|
°F
|
125
|
| OTHER |
| ESCR
(100% IGEPAL) |
|
|
>1000
|
|
|
**When
used unmodified for food contact applications, this copolymer
will comply with the U.S. Food and Drug
Administration Food Additive Regulation 21 CFR 177.1520(c)3.1a.
This section does not include use in packing or
holding food during cooking. This product is limited to use
in contact with food only under the conditions of use C
through H described in table 2 of Sec. 176.170(c), and when
contacting fatty foods of Types III, IVA, V, VII-A,
and IX described in table 1 of Sec. 176.170(c), the finished
articles are to have a volume of at least 18.9 liters (5
gallons). The uses cited are subject to good manufacturing practices
and any limitations, which are part of the
regulations. The regulations should be consulted for complete
details.
†The data listed here fall within the normal range of product
properties, but they should not be used to establish
specification limits or used alone as a basis for design. This
information is not intended as a warranty of any kind.
Buyers must make their own representative test and assume all
risks of use, whether used alone or in combination
with other products. Entec Polymers, LLC assumes no obligation
or liability of any advice furnished by it or results
obtained with respect to these products. All warranties expressed
or implied including warranties of merchantability
for a particular purpose or use are excluded and disclaimed.
Entec Polymers, LLC assumes no liability for use of
products in infringement of any patent. The foregoing limitation
of remedy and exclusion of liability is reflected in
and is part of the consideration for the price, at which the
products are sold by Entec Polymers, LLC. All data
displayed herein has been obtained via testing of injected molded
specimens of natural color. Pigmentation may affect
certain properties to various degrees. |
|
|
Plastic Bench
Seating, Plastic Benches, Plastic Chairs, Chairs, Plastic
Two-Person Bench, Metal Bench, Metal Armor,
Bench, Benches, Park Benches, Polysteel, Site Amenities, Site
Furnishings, and Steel Mesh Benches from your source for material
handling equipment.
|
Back to Product Page
|
