Belt Conveyors, Piano Hinge Parts Conveyor, Incline Conveyor, Conveyors

LK Goodwin Co. Material Handling Equipment

MY ACCOUNT

Back to Product Page

MODEL PCH
PIANO HINGE PARTS CONVEYOR
The Model “PCH” parts conveyor with hinged steel belt is ideal for carrying hot, oily parts from punch presses, forging machines, etc., to drums, hoppers, or other operations. Configurations range from straight to “Z” type units.

5 Belt Widths
Piano Hinge Belt

Heavy-duty PCHS Type Adjustable Floor Supports Available


STANDARD SPECIFICATIONS

OVERHEAD END DRIVE–Located on discharge end of conveyor. Chain guard located on right hand side.		TAKE-UP–Take-ups are provided to insure proper belt tension.

		BEARINGS–Sealed, re-lube bearings at drive and take-up.

BELT–Piano Hinge metal belt with 12 ga. plain bottom aprons. 2-1/2 in. pitch chain with 1-1/2 in. dia. hardened rollers with 7/16 in. dia. hinge axle. 1-1/2 in. high x 10 ga. continuous off-set side wing links.

		SPEED REDUCTION– Sealed worm gear speed reducer driven by V-belt. No. 60 roller chain to drive sprockets.

BED–8-5/8 in. deep x 10 ga. powder painted, formed steel channel. Modular bed sections bolt together with butt couplings. 45° standard incline section.
		MOTOR– 1 HP -208/230/460/575V-3 Ph. 60 Hz. with torque limiter (Not a warranty item). Totally Enclosed.

BELT GUIDES–Steel angle mounted inside bed for tracking belt.
		BELT SPEED–Constant 30 FPM.

		CAPACITY–35 lbs. belt capacity per linear foot of conveyor.

DRIVE SPROCKETS–5 in. pitch dia. with 1-7/16 in. dia. shaft, 6 tooth.

		FLOOR SUPPORTS–Now supplied as optional equipment.

TAKE-UP SPROCKETS–5 in. pitch dia. with 1-7/16 in. dia. shaft, 6 tooth.



	Model PCH design makes it ideal for positioning into or under punch presses and similar equipment. Horizontal discharge section allows easy positioning of hopper or drum for parts collection.


OPTIONAL EQUIPMENT

FLOOR SUPPORTS–PCHS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above PCHS-3 support.		INCLINES–30°, 45° and 60° angles. Horizontal available.

		BED–2 ft. through 10 ft. intermediate beds available.

		MOTORS–Energy efficient, single phase, brake- motor, other characteristics. 2 HP maximum.

BELT–Perforated, pimpled, or pimpled and per- forated. 1-1/2 in. or 2 in. high cleats.

		ELECTRICAL CONTROLS–Magnetic starters, push button stations and AC variable frequency drive.

DRIP PANS–Mounted underneath conveyor frame for drainage.

		BELT SPEED–Other constant and variable speeds.

COVER–Mounted on top of conveyor frame to keep parts from falling back when conveyor is used at steep incline.


PRICES FOR COMPLETE CONVEYOR INCLUDE:

"Piano Hinge" Metal Belt (Plain Bottom)		30 FPM Constant Conveying Speed

8-5/8" Deep x 10 Ga. Formed Steel Channel Frame		Take-Up On Each End

1 HP Totally Enclosed Fan Cooled Motor (Specify Exact Voltage)		Less Electrical Controls

		Less Supports
		Less Supports
Totally Enclosed Chain Guard & V-Belt Guard		Torque Limiter (NOT A WARRANTY ITEM)

ORDERING NOTE:


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

Location (See Drawing)	Description	Length Angle Degree	Belt Width
			6"	8"	12"	18"	24"
			Between Rail Width
			5 7/8"	7 7/8"	11 7/8"	17 7/8"	23 7/8"
			Overall Frame Width
			10 3/8"	12 3/8"	16 3/8"	22 3/8"	28 3/8"
1	Tail Assembly	2'	$3,096	$3,144	$3,248	$3,402	$3,553
1		2' - 6"	$3,329	$3,384	$3,495	$3,665	$3,833
1		3'	$3,559	$3,622	$3,742	$3,929	$4,108
2	Lower Incline Joint	30'	$787	$794	$811	$836	$862
2		45'	$952	$963	$990	$1,025	$1,064
2		60'	$1,113	$1,132	$1,168	$1,215	$1,268
3	Intermediate	2' *	$1,116	$1,146	$1,195	$1,278	$1,356
3		4' *	$2,046	$2,095	$2,183	$2,334	$2,479
3		6' *	$2,975	$3,041	$3,178	$3,394	$3,596
3		8' *	$3,901	$3,989	$4,167	$4,450	$5,153
3		10' *	$4,876	$4,937	$5,155	$5,509	$5,837
4	Upper Incline Joint	30'	$695	$704	$724	$749	$771
4		45'	$864	$875	$900	$938	$975
4		60'	$1,027	$1,043	$1,080	$1,128	$1,178
5	Drive Assembly	2'	$5,063	$5,113	$5,214	$5,370	$5,519
5		2' - 6"	$5,298	$5,350	$5,462	$5,637	$5,798
5		3'	$5,528	$5,584	$5,708	$5,899	$6,079
6	End Cap	-	$42.20	$45.50	$46.60	$50.00	$56.60

*Maximum OAL is 30'. For Lengths
Longer Than 30', Contact Us.

IMPORTANT NOTES...

OTHER WIDTHS

NON-STANDARD WIDTHS

For "IN-BETWEEN WIDTHS",
use next width plus 10%. For
widths over 28-3/8" OAW,
contact us.

PRICES FOR OPTIONAL EQUIPMENT

OPTIONAL BELT (Per Foot of Conveyor)

FLOOR SUPPORTS

BELT	BELT WIDTHS
BELT	6"	8"	12"	18"	24"
Perforated or Pimpled	N/C
Pimpled & Perforated	$42.30	$51.70	$70.20	$97.10	$141.60

"PCHS" SUPPORT

Model No.	Adjustment to Top of Belt	Price Each
PCHS-1	12 7/8" to 14 3/8"	$93.20
PCHS-2	14 3/8" to 17 3/8"	$93.90
PCHS-3	17 3/8" to 20 3/8"	$96.90
PCHS-4	20 3/8" to 23 3/8"	$100.00
PCHS-5	23 3/8" to 26 3/8"	$103.70
PCHS-6	26 3/8" to 32 3/8"	$127.10
PCHS-7	32 3/8" to 38 3/8"	$139.70
PCHS-8	38 3/8" to 50 3/8"	$161.70
PCHS-9	50 3/8" to 62 3/8"	$180.90
PCHS-10	62 3/8" to 74 3/8"	$197.80
PCHS-11	74 3/8" to 86 3/8"	$209.90
PCHS-12	86 3/8" to 98 3/8"	$234.80

NOTE: To obtain approximate conveyor length, Add lengths of
section 1, 3 & 5.

OPTIONAL DRIVE

Drive Type	BED WIDTHS
Drive Type	10-3/8" to 28-3/8"
Side Mounted V-Belt Driven	$387.80

#60 O-Ring Drive Chain ...............Add .........

$406.00

DRIP PAN

(Use with Perforated Belt) .......per foot .....

$55.60

Add per Joint ..........................each ...........

$214.80

Knee Braces ........Add................

$72.80

NOTE: Drip pans are not water tight.

NOTE: SPECIFY INFEED AND DISCHARGE
ELEVATION

MOTORS

Extra Motor Price for OTHER THAN: 1/2 HP - 208/230
460/575/V-3 Ph.-60 Hz.-Totally Enclosed.

Speed affects horsepower requirements.

H.P. REQ.	ENERGY EFFICIENT	TOTALLY ENCLOSED
H.P. REQ.	200/208/230/ 460/575V 3 Ph.-60 Hz.	115/230 1 Ph.-60 Hz.
1	N/C	$83.60
2	$936.80	$1,142.20

ELECTRICAL CONTROLS

GALVANIZING

(See below)


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

ELECTRICAL CONTROLS AND DRIVE SECTION

MANUAL START SWITCH or
SAFETY DISCONNECT

LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER

#032.1014.........................................

$213.01

#033.2032 & #033.2072..................$555.67
Nema 4

"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)

LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER

#033.2033& #033.2072...................$332.11
Nema 4

REVERSING DRUM SWITCH

#032.103..........................................

$854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase

PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range

FOOT SWITCH WITH GUARD

#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range

#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.

PHOTO EYE, ON-OFF TYPE

#EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC

POWER CORD AND PLUG (20')

POWER CORD WITH PLUG ONLY 20' LONG
Model No.	Voltage	HP Rating	Prices
EA-039-1A	115/1	1/2-3/4	$106.67
EA-039-2A	115/1	1	$106.67
EA-039-3A	115/1	1 1/2	$155.18
EA-039-4A	230/1	1/2-1	$106.67
EA-039-5A	230/1	1 1/2-2	$109.67
EA-039-6A	208-230/3	1/2-2	$178.60
EA-039-7A	460/3	1/2-2	$178.60

POWER CORD WITH PLUG 20' LONG WITH MANUA
Model No.	Voltage	HP Rating	Prices
EA-039-1B	115/1	1/2-3/4	$173.16
EA-039-2B	115/1	1	$330.67
EA-039-3B	115/1	1 1/2	$377.96
EA-039-4B	230/1	1/2-1	$293.04
EA-039-5B	230/1	1 1/2-2	$330.67
EA-039-6B	208-230/3	1/2-2	$362.97
EA-039-7B	460/3	1/2-2	$362.97

MOUNTING BRACKETS FOR PHOTO
EYE #033.2122

B-05165...........................................$118.10

AIR PRESSURE SWITCH

#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH

#032.285 with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4

"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE

#032.281...one side.................$7.44 per / ft.
both sides..............$15.87per / ft.

EMERGENCY PUSH BUTTON

#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE

#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48

NOTE: PRICING LISTED NOT MOUNTED
OR WIRED

"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC

#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

CONTROLLER PRICES

AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size	115 Volt		208/230 Volt
1/2	VSC-12-10		VSC-12-12
Price	$1,491.84		$1,189.37
1	VSC-12-11		VSC-12-13
Price	$1,724.27		$1,391.05
2	N/A		VSC-12-14
Price	~		$1,794.20
THREE PHASE CONTROLLER INPUT
Motor Size	208/230 Volt	460 Volt	575 Volt
1/2	VSC-01-15	VSC-01-18	VSC-12-29
Price	$1,564.99	$1,656.34	$2,155.73
1	VSC-01-16	VSC-01-19	VSC-12-29
Price	$1,579.75	$1,794.20	$2,155.73
2	VSC-01-17	VSC01--20	VSC-12-30
Price	$1,978.69	$2,070.37	$2,663.45

REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS

HP	Part No.	Price
1/2	032.351 230/460	$618.71
1	032.353 230/460	$705.52
2	032.355 230/460	$797.31
1/2	032.3512 575	$1,449.11
1	032.3532 575	$1,611.17
2	032.3552 575	$1,897.10

IMPORTANT NOTES...

• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146.

OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)

$675.20

• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $542.68 for this option.)

Brake Relay Kit (EA-068A)..............................

$542.68

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE

Part No.	Description	Price
EA-VSC-01-CB	2 HP Electronic Clutch-Brake Kit	$5,058.00

OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)

$675.20

KIT INCLUDES

Part No.	Description
VSC-01-20	AC Variable Speed Controller, 460 Volt, 3 Phase
032.345	2 HP 460 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets

IMPORTANT NOTES

• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets

Part No.	Description
VSC-01-17	AC Variable Speed Controller, 230 Volt, 3 Phase
032.345	2 HP 230 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)

An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.

THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	MOTOR DUTY	NON-REVERSING					REVERSING
H.P.	MOTOR DUTY	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE
1/2	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B25	EN-46B16	EN-57B10	$1516.60	ER-20B40	ER-23B25	ER-46B16	ER-57B10	$2,023.30
			EN-23B25	EN-46B16				ER-23B25	ER-46B16
			EN-23B16	EN-46B10				ER-23B16	ER-46B10
1	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B40	EN-46B25	EN-57B16		ER-20B40	ER-23B40	ER-46B25	ER-57B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
1-1/2	GEARMOTORS	EN-20C10	EN-23B63	EN-46B40	EN-57B25		ER-20C10	ER-23B63	ER-46B40	ER-57B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
2	STANDARD EASY CLEAN ENERG. EFF.	EN-20C10	EN-23C10	EN-46B40	EN-57B40		ER-20C10	ER-23C10	ER-46B40	ER-57B40
			EN-23C10	EN-46B40				ER-23C10	ER-46B40
			EN-23B63	EN-46B40				ER-23B63	ER-46B40

SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	NON-REVERSING		REVERSING		NON-REVERSING		REVERSING
	115 VOLT	PRICE	115 VOLT	PRICE	230 VOLT	PRICE	230 VOLT	PRICE
1/2	EN-1SC10	$1,182.40	ER-1SC10	$2,023.30	EN-2SB63	$1,435.60	ER-2SB63	$2,023.30
1	EN-1SC16		ER-1SC16		EN-2SC10		ER-2SC10
1-1/2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10
2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10


• Manual Start-Stop Switch Kit			• Start-Stop Push Button Kit, Remote Mounted
	EA-000001 ......................................	$242.09		EA-000002.......................................	$242.09
	Includes: 032.1014 Manual Start Switch, Nema 1, B-21467 Mounting Bracket with Mounting Hardware			Includes: 033.1955 Push Button Station, One Direction, Nema1, B-21467 Mounting Bracket with Mounting Hardware

• Forward-Reverse-Stop Push Button Kit, Remote Mounted

			• Up-Down-Stop Push Button Kit, Remote Mounted
	EA-000003.......................................	$440.67	• Up-Down-Stop Push Button Kit, Remote Mounted
	Includes: 033.1965 Push Button Station, Reversing, Nema1, B-21467 Mounting Bracket with Mounting Hardware			EA-000004.......................................	$440.67
				Includes: 033.1975 Up Down Stop Push Button Station, Reversing, Nema 1, B-21467 Mounting Bracket with Mounting Hardware


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station				• “Start-Stop”Push-button Station
033.1955			$211.23		033.195.................................................	$142.50
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Fwd-Rev-Stop” Push-button Station				• “Fwd-Rev-Stop”Push Button Station
033.1965			$397.05		033.196..................................................	$490.95
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Up-Down-Stop” Push-button Station				OPTIONAL STARTER CONTROLS
033.1975			$397.05	OPTIONAL STARTER CONTROLS
033.1975			$397.05	• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1				• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1					EA-011 ............................................ Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), and a Control Circuit Transformer (As Required), & Pushbutton Station (033.195).	$3,210.68
						$3,210.68

IMPORTANT NOTES
• Control Circuit Transformer Included for 115 Volt Control Voltage. • Above starters are in Nema 3, 4 and 12 Enclosures. • The starters included Safety Disconnect, Overload Relay, and Aux. Contacts as required. • IF AN ORDER IS SUPPLIED LESS MOTOR, AND IS SUPPLYING ANY ELECTRICAL CONTROLS, THEN MOTOR HP, VOLTAGE, PHASE, AND FULL LOAD CURRENT MUST BE STATED ON THE ORDER. • PRICING LISTED IS NOT MOUNTED OR WIRED.

				• Auto Restart Control, 1 Phase, Non-Reversing
					EA-012 (115 Volt) ........................... EA-017 (230 Volt) ........................... Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), Pushbutton Station (033.195), and (230 V. Only) a Control Circuit Transformer (As Required). Note: Above Price does NOT include Photo Eye Mounting Bracket.	$3,253.63
						$3,391.27

• Add on	$192.70	for the above Push Buttons
to be Mounted.
• Add on	$995.10	for the above Starters and
Push Button Stations to be Mounted and Wired. Supply 20'0" of cable for push button only.

				• Mounting Brackets for photo eye
				• Mounting Brackets for photo eye
					#033.2122 B-05165 ..............................................
						$118.10

CONVEYOR WEIGHT TABLE

Overall Frame Width	Between Rail Width	Belt Width	"A"	"B"	"C"		"D"		Weights (Lbs.)
Overall Frame Width	Between Rail Width	Belt Width	"A"	"B"	4'	6'	4'	6'	4'	6'
10 3/8"	5 7/8"	6"	24"	4'	58"	75"	103 5/8"	120 5/8"	658	754
10 3/8"	5 7/8"	6"	30"	or	58"	75"	115 5/8"	132 5/8"	711	807
10 3/8"	5 7/8"	6"	36"	6'	58"	75"	127 5/8"	144 5/8"	755	851
12 3/8"	7 7/8"	8"	24"	4'	58"	75"	103 5/8"	120 5/8"	682	782
12 3/8"	7 7/8"	8"	30"	or	58"	75"	115 5/8"	132 5/8"	735	835
12 3/8"	7 7/8"	8"	36"	6'	58"	75"	127 5/8"	144 5/8"	781	881
16 3/8"	11 7/8"	12"	24"	4'	58"	75"	103 5/8"	120 5/8"	735	84
16 3/8"	11 7/8"	12"	30"	or	58"	75"	115 5/8"	132 5/8"	802	911
16 3/8"	11 7/8"	12"	36"	6'	58"	75"	127 5/8"	144 5/8"	843	952
22 3/8"	17 7/8"	18"	24"	4'	58"	75"	103 5/8"	120 5/8"	834	961
22 3/8"	17 7/8"	18"	30"	or	58"	75"	115 5/8"	132 5/8"	900	1027
22 3/8"	17 7/8"	18"	36"	6'	58"	75"	127 5/8"	144 5/8"	957	1084
28 3/8"	23 7/8"	24"	24"	4'	58"	75"	103 5/8"	120 5/8"	972	1123
28 3/8"	23 7/8"	24"	30"	or	58"	75"	115 5/8"	132 5/8"	1050	1201
28 3/8"	23 7/8"	24"	36"	6'	58"	75"	127 5/8"	144 5/8"	1116	1267

Belt Conveyors, Cleated Belt, Conveyor, Conveyor Belt, Hinged Steel Belt, Incline Conveyor, Low Profile Conveyor, Piano Hinge Parts
Conveyor, Parts Conveyor, Portable Belt Conveyors, Conveyors, and Slider Bed from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART

MODEL PCH

PIANO HINGE PARTS CONVEYOR

Belt Conveyors, Cleated Belt, Conveyor, Conveyor Belt, Hinged Steel Belt, Incline Conveyor, Low Profile Conveyor, Piano Hinge Parts Conveyor, Parts Conveyor, Portable Belt Conveyors, Conveyors, and Slider Bed from your source for material handling equipment.

Belt Conveyors, Cleated Belt, Conveyor, Conveyor Belt, Hinged Steel Belt, Incline Conveyor, Low Profile Conveyor, Piano Hinge Parts
Conveyor, Parts Conveyor, Portable Belt Conveyors, Conveyors, and Slider Bed from your source for material handling equipment.