MICRO VT SYSTEMS (VT90)
			Lifts Small, Light Loads
				With a smaller diameter lifting tube and lifting pads smaller in area than used on our Standard or Mini Tube Lift systems, the Micro system is especially suited for lifting small, light loads.
			Easy Festooning
				The Micro VT90 System's use of a small diameter supply hose makes festooning lighter and less cumbersome.
			Ergonomic Operation
				The Micro VT90's subcompact design allows for quick, easy, ergonomic operation in close proximity to the operator. Its handles permit one or two hand operation.
			Smooth Operation
				The control head handle is easy to grasp with operator controls designed for smooth, effortless operation.
			Production Lifting and Packaging
				The Micro Tube system's continuous duty cycle lifting and packing small, compact items on a fast paced production basis.
			High Quality
				As with all Tube Lift Systems, Micro VT90 Vacuum tube lift systems are manufactured using only the highest quality processes.
The Micro Tube Lifter VT90, the newest addition to our line of vacuum tube lifting systems, features a lifting tube with a diameter of only 90 mm (3.54"), a sub-compact size control head, and smaller vacuum attachment pads.
			Lifts up to 65 lb (29 kg)
				Non-porous loads weighing as much as 65 pounds (29 kg) can be easily handled with the Micro VT90 system.
Load Lifting Capacity Range
			Low Price
				Micro VT90 Tube Systems are economically priced and the most affordable choice where repetitive handling of lightweight, compact loads is required.
	To request a quote, or phone consultation, please click on the 'Quote' link at the top (or bottom) of the page to submit your information

CAPACITIES WITH SPECIFIC STATIONS
Vacuum Station Model System Model Number VT90 Non-Porous Semi-Porous Porous lb (kg) lb (kg) lb (kg) VB3HF-S 25 (11) 18 (8) 12 (5) VB4HF-S 45 (20) 37 (17) 30 (14) VB7HV-S 65 (29) 48 (22) 32 (15)
Important Note:
These capacity ranges should only be used as general guidelines. Actual system capacities depend on several factors (load surface porosity, load density, vacuum station, pad attachments, etc.

Sound Deadening Enclosures
			Pumps for Special Applications
	Optional sound deadening enclosures can reduce operating noise by approximately 6 dB.
				For specialized lifting applications, we are able to offer alternate vacuum stations, including systems with pumps designed for use in hazardous duty, explosive environments and for wash-down applications.
Energy Efficient
	These pumps are far more energy efficient, require less horsepower, and operate at a speed of only 3500-rpm vs. the 7000-rpm common with belt-drive pumps.
			Optional Mounting
				Optional stands and wall mounting brackets are available to assist in locating these vacuum pumps away from the work area.
Ready to Use
	All regenerative pumps are equipped with exhaust mufflers, filters with vacuum gauges for monitoring the overall system performance, fittings, and hose, Vacuum relief valves to prevent the pumps from operating under a deadhead condition are optionally available.
			Optional Wireless Remote Control
				All tube lift systems can be fitted with a wireless remote control for powering the vacuum pump, useful when the pump is mounted remotely from the operator's station. The remote control can be attached to the lifter control head or supplied with a belt clip to be worn by the operator.

Back to Product Page