Back to Product Page
MODEL
SB
|
HORIZONTAL BELT CONVEYOR
(SLIDER BED)
|
 |
|
The
Model SB is a slider bed conveyor
designed with channel frames and bolt in
pans. Frame design makes it ideal for
matching up with roller bed conveyors. |
|
|
|
•
15 Belt Widths
• Center Drive
• Reversible
• System Ends
• Pop-Out Roller
• Adjustable MS-Type Floor
Supports Available |
|
|
|
 |
 |
|
|
SECTION
"X-X" |
|
|
|
STANDARD
SPECIFICATIONS |
|
|
|
|
BELT – Ultimate 140 BBS–Nitrile.
BED – 12 ga. galvanized slider pan mounted in 6-1/2 in.
x 12 ga. powder painted formed steel channel frame
bolted together with splice plates.
CENTER DRIVE – Provides 16 in. of belt take-up.
Minimum elevation–17-3/4 in. Specify location. Minimum
OAL without modification-120 in. Chain guard located
on left hand side.
DRIVE PULLEY – 8 in. dia. with 1-7/16 in. dia. shaft
at bearings, machine crowned and fully lagged.
TAIL PULLEY – 4 in. dia. with 1 in. dia. shaft at
bearings or 6 in. dia. with 1-3/16 in. dia. shaft at
bearings, machine crowned.
SNUB IDLER – Adjustable 2-1/8 in. dia. pre-
lubricated ball bearings. Guards included. |
|
|
RETURN
IDLER – Adjustable 1.9 in. dia. pre-
lubricated ball bearings.
TAKE-UP – Take-up in center drive provides 16 in.
of belt take-up.
BEARINGS – Sealed, pre-lubricated, self-aligning,|
ball bearings on drive and tail pulleys.
SPEED REDUCTION – Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley.
MOTOR–1 HP–208/230/460/575V–3 Ph.–60 Hz.
Totally Enclosed C-Face.
BELT SPEED – Constant 65 FPM.
CAPACITY – Maximum load per linear foot of con-
veyor 100 lbs. NOT TO EXCEED capacity in charts.
FLOOR SUPPORTS – Now supplied as optional
equipment. |
|
|
|
|
|
|
|
8" DIA DRIVE PULLEY HORIZONTAL LIVE LOAD CAPACITY @ 65 FPM |
HP |
BELT WIDTHS TO |
LENGTHS UP TO |
52' |
102' |
DISTRIBUTED LOAD (LBS.) |
1 |
14" |
920 |
870 |
24" |
890 |
820 |
36" |
820 |
720 |
48" |
770 |
770 |
54" |
500 |
300 |
2 |
14" |
1920 |
1870 |
24" |
1890 |
1820 |
36" |
1820 |
1730 |
48" |
1770 |
1650 |
54" |
1200 |
1050 |
|
|
|
|
OPTIONAL
EQUIPMENT |
|
|
|
FLOOR
SUPPORTS – MS Type fl oor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every
bed joint and ends of conveyor. Holes in feet for lagging
to floor. Knee braces recommended above MS-6
support. |
|
GUARD RAILS – Adjustable Universal Channel
Guard Rail, fi xed channel, type A & B angle. Fixed
Channel overlapping, one direction. Fixed Channel
nonoverlapping, reversing. See Accessory section. |
|
PULLEYS – 6 in. tail pulley with 1-3/16 in. dia. shaft
at bearings in place of 4 in. when not furnished as
standard. |
BELT* – White Polymate 100 RMP-COS (cover one
side), Black Trackmate 533 COS-PVC, Tan Glidetop. |
|
|
CASTERS –
See Accessory section. |
BELT
SPEED* – Other constant and variable speeds.
V-belt drive supplied on speeds under 17 FPM. |
|
POLY-TIER
SUPPORTS – 36 in. to 120 in.
support heights in 6 in. increments. Knee braces
supplied. |
END
DRIVE – 8 in. end drive mounted on end of unit.
Requires underside take-up. |
|
|
CEILING
HANGERS – 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and
galvanized rods available. |
LOW
ELEVATION SIDE MOUNTED CENTER
DRIVE – Motor reducer unit mounted to side of con-
veyor. Minimum elevation 16-1/2 in. |
|
|
MOTORS – Energy effi cient, single phase, brake-
motor, other characteristics. 2 HP maximum. |
V-BELT
DRIVE – V-Belt supplied between motor
and reducer. Minimum overall drive width 14 in.
Allow 65 in. |
|
|
ELECTRICAL
CONTROLS – One direction
manual start switch, reverse drum switch, non-rever-
sing and reversible magnetic starters, push button
stations. AC variable frequency drive. |
O-RING
DRIVE CHAIN – With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). |
|
|
|
|
*
NOTE: Capacity affected with these options. |
|
|
|
|
|
|
|
|
| PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
•
Center Drive, Located on Left Hand Side of Conveyor
When Standing at Infeed Looking at Discharge (Specify
Exact Location)
• Black Ultimate 140 BBS Belt
• 6-1/2” Deep x 12 Ga. Channel Frame
• “C” Face Speed Reducer–Sealed Worm Gear |
|
|
|
•
1 HP–“C” Face Totally Enclosed Motor (Specify
Exact Voltage)
• Totally Enclosed Chain Guard
• 65 FPM Belt Speed
• Less Electrical Controls
• Less Floor Supports |
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
SIZE TO
ORDER
Overall
Length "A"
4" Dia. Pulley |
BED
LENGTH
"L" |
Belt Widths |
SIZE TO
ORDER
Overall
Length "A"
6" Dia. Pulley |
Belt
Widths |
| 12" |
18" |
24" |
30" |
36" |
| Between Rail Widths |
Between
Rail Widths |
| 15" |
21" |
27" |
33" |
39" |
| Overall Frame Widths |
Overall
Frame Widths |
| 18" |
24" |
30" |
36" |
42" |
| 12' |
10' |
|
|
12' |
|
|
|
| 17' |
15' |
|
|
17' |
|
|
|
| 22' |
20' |
|
|
22' |
|
|
|
| 27' |
25' |
|
|
27' |
|
|
|
| 32' |
30' |
|
|
32' |
|
|
|
| 37' |
35' |
|
|
37' |
|
|
|
| 42' |
40' |
|
|
42' |
|
|
|
| 47' |
45' |
|
|
47' |
|
|
|
| 52' |
50' |
|
|
52' |
|
|
|
| 57' |
55' |
|
|
57' |
|
|
|
| 62' |
60' |
|
|
62' |
|
|
|
| 67' |
65' |
|
|
67' |
|
|
|
| 72' |
70' |
|
|
72' |
|
|
|
| 77' |
75' |
|
|
77' |
|
|
|
| 82' |
80' |
|
|
82' |
|
|
|
| 87' |
85' |
|
|
87' |
|
|
|
| 92' |
90' |
|
|
92' |
|
|
|
| 97' |
95' |
|
|
97' |
|
|
|
| 102' |
100' |
|
|
102' |
|
|
|
| Price Per Foot |
|
|
Price
Per Foot |
|
|
|
|
| *Refer
to the bottom of the page for conveyor weights. |
|
|
| IMPORTANT
NOTES |
|
•
OTHER LENGTHS
Other lengths not listed in price chart are available. For “IN-BETWEEN
SIZES”, use next larger Overall Length
“A” price. All widths available in 1 ft. length increments (excluding
54” and 60”.)
• OTHER WIDTHS
For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over
60” OAW, contact us for lead time.
• NON-STANDARD WIDTHS: Contact us for lead time.
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports not included.
• FLOOR SUPPORTS
FLOOR SUPPORTS ARE NOT INCLUDED IN BASE PRICE. There are two (2) stationary
floor supports
required for the first bed section and one (1) support required per bed
section thereafter. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
|
| OPTIONAL
BELTS |
Extra
Price PER FOOT Conveyor Length "A" (in addition to Black Ultimate
140 BBS Belt regularly furnished).
See chart. |
|
| Belt Description |
BELT
WIDTH |
Prices
Per Foot of Conveyor Length "A" |
Prices Per Foot of Conveyor Length "A" |
Trackmate
533 COS-PVC
(Black) |
Polymate
100 RMP-COS
(White) |
Trackmate
120 Roughtop
with PVC Cover
(Black) |
Tan
Glidetop |
High Grip
Longitudinally
Grooved Belt |
| 10" |
|
|
|
|
|
| 12" |
|
|
|
|
|
| 14" |
|
|
|
|
|
| 16" |
|
|
|
|
|
| 18" |
|
|
|
|
|
| 20" |
|
|
|
|
|
| 22" |
|
|
|
|
|
| 24" |
|
|
|
|
|
| 28" |
|
|
|
|
|
| 30" |
|
|
|
|
|
| 34" |
|
|
|
|
|
| 36" |
|
|
|
|
|
| 42" |
|
|
|
|
|
| 48" |
|
|
|
|
|
| 54" |
$7.77 |
$47.62 |
$38.41 |
$220.78 |
$38.41 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| MOTORS |
Extra Motor Price for OTHER THAN: 1 HP-208/230/460/575 v -3Ph.-60Hz.-Totally Enclosed. Speed affects
horsepower requirements. |
*NOTE: "High Cycle Brakemotors" are used for indexing and are for indexing
and are rated for 30 cycles per minute.
Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate, and #60
Chain and Sprockets with Taper
Bushed Hubs. |
**NOTE:
"High Cycle Brakemotor" Add-On Prices Include 5AC Reducer, Heavy
Duty Mtor Base Plate and
Timing Belt Drive. |
|
H.P.
REQ. |
ENERGY
EFFICIENT |
TOTALLY ENCLOSED |
BRAKEMOTORS |
200/208/230/
460/575V
3 Ph.-60 Hz. |
115/230V
1 Ph.-60 Hz. |
Holding
Brake
208/230/460/575V
3 Ph.-60Hz. |
Cycling
Brake
208/230/
460/*575V
3 Ph.-60Hz.. |
Cycling
Brake 208/230/460/575V
3Ph-60Hz |
Holding
Brake
115/230V
1 Ph.-60Hz. |
1 |
N/C |
|
|
|
|
|
2 |
|
|
|
|
|
|
|
| *575V
- Prices
coded in light blue call for lead time. |
|
|
|
|
|
|
|
|
|
|
|
| FLOOR
SUPPORTS |
|
|
|
|
|
|
|
|
CEILING HANGERS |
|
Not
Included in Base Price. Use Chart Below for
Required Elevation. |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
"MS"
SUPPORT |
|
|
|
|
|
|
|
| Model No. |
Adjustment to Top
of Belt |
Price Each |
| *MS-1 |
13-7/8" to 15-7/8" |
|
| *MS-1.2 |
14-7/8" to 16-5/8" |
|
| *MS-1.4 |
15-7/8" to 17-5/8" |
|
| *MS-2 |
16-7/8" to 19-7/8" |
|
| MS-3 |
19-1/2" to 22-1/2" |
|
| MS-4 |
22-1/2" to 28-1/2" |
|
| MS-5 |
26-1/2" to 32-1/2" |
|
| MS-6 |
30-1/2" to 42-1/2" |
|
| MS-7 |
40-1/2" to 52-1/2" |
|
| MS-8 |
52-1/2" to 54-1/2" |
|
| MS-9 |
54-1/2" to 76-1/2" |
|
| MS-10 |
76-1/2" to 88-1/2" |
|
| MS-11 |
86-1/2" to 98-1/2" |
|
| MS-12 |
98-1/2" to 110-1/2" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ceiling Hanger Brackets with
(2) 5/8” dia.
x 8’-0” long unplated fully threaded rods...... |
|
|
|
|
|
$147.90 |
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia.
x 8’-0” long galvanized fully threaded rods.... |
|
|
|
|
|
$176.60 |
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia.
x 10’-0” long unplated fully threaded rods..... |
|
|
|
|
|
$218.40 |
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia.
x 10’-0” long galvanized fully threaded rods.... |
|
|
|
|
|
$359.60 |
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia.
x 12’-0” long unplated fully threaded rods..... |
|
|
|
|
|
$362.60 |
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia.
x 12’-0” long galvanized fully threaded rods.... |
|
|
|
|
|
$419.40 |
|
|
|
|
Ceiling
Hanger Brackets, Less Rods Only.... |
$93.10 |
|
|
|
|
Extra
Length Rods: |
|
|
|
|
|
(2)
8’-0” long x 5/8” dia. unplated fully
threaded rods ............................................ |
|
|
|
|
|
$54.20 |
|
|
|
|
|
|
|
*Knee
Braces ...................... Per pair ......... |
$30.00 |
|
|
|
|
|
|
|
(2)
8’-0” long x 5/8” dia. galvanized fully
threaded rods ............................................. |
|
|
*Less
than 17 3/4" top of belt elevation-Side Mounted Center
Drive Required (With 8" dia. Drive Pulley).
Note: MS-7 to MS-12: Knee Braces included in price. |
|
|
|
|
|
|
$83.40 |
|
|
|
(2)
10’-0” long x 5/8” dia. unplated fully
threaded rods .............................................. |
|
|
|
|
$125.20 |
|
|
|
|
|
|
|
|
|
|
|
|
(2)
10’-0” long x 5/8” dia. galvanized fully
threaded rods .............................................. |
|
|
|
|
|
|
|
$266.30 |
|
|
|
|
|
|
|
(2)
12’-0” long x 5/8” dia. unplated fully
threaded rods .............................................. |
|
|
|
|
|
|
|
|
$269.60 |
|
|
|
|
|
|
(2)
12’-0” long x 5/8” dia. galvanized fully
threaded rods .............................................. |
|
|
|
|
|
|
|
$326.50 |
|
|
|
|
|
|
Hex
Coupling Nuts for Rods ................... |
$4.90 |
|
|
|
|
|
|
|
|
|
|
|
| • POLY-TIER SUPPORTS |
 |
|
PRICES
FOR COMPLETE
SUPPORT INCLUDE: |
|
|
|
IMPORTANT
NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
|
•
Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only |
|
|
|
|
|
|
|
|
|
|
|
|
CAPACITY
DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs |
|
|
|
|
|
|
|
|
|
|
|
|
| (2) TIER POLY-TIER SUPPORTS |
36" |
|
42" |
|
48" |
|
54" |
|
60" |
|
66" |
|
72" |
|
78" |
|
84" |
|
90" |
|
96" |
|
102" |
|
108" |
|
114" |
|
120" |
|
|
|
| (3) TIER POLY-TIER SUPPORTS |
36" |
|
42" |
|
48" |
|
54" |
|
60" |
|
66" |
|
72" |
|
78" |
|
84" |
|
90" |
|
96" |
|
102" |
|
108" |
|
114" |
|
120" |
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
|
|
|
| CASTERS |
|
|
LARGER
TAIL PULLEY |
| Are
available in either Rigid or Swivel type—Specify. |
|
|
6"
dia.Tail Pulley in place of 4" dia. when
not furnished as standard............................. |
|
|
|
| |
4" Dia. |
6" Dia. |
| CASTERS |
Steel |
Rubber |
Steel |
Rubber |
| Extra Per Support* |
|
|
|
|
|
|
|
$360.10 |
|
|
|
|
|
|
|
|
|
CONSTANT
AND VARIABLE SPEEDS |
|
|
|
Constant C-Face--Within
17-135 FPM... |
No
Charge |
|
*
Price Includes Knee Braces
NOTE: Casters for HS Supports, contact us. |
|
|
Constant
V-Belt--Minimum of 4 FPM.............. |
|
|
|
...........................................Use
V-Belt Drive Add-On |
|
|
|
|
|
Constant
Speeds Below Those Listed Above...........
............................................................Contact us. |
|
Brakes
for Casters (Add-On Per Support)*:
4” Dia. Caster ...............................................$39.20
6” Dia. Caster ...............................................$125.20 |
|
|
|
|
|
Variable
Speed...See AC Variable Speed Drives
Section below |
|
*Available
on swivel casters only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DRIVE
COMPONENT DEDUCTS |
| UNDERSIDE
TAKE-UP |
|
|
|
|
Less
Motor Drive, Motor Mount and Guards, |
| Provides
16" of Belt Take-Up on Long Units. |
|
|
|
|
|
|
but
with Shaft Extension...Deduct................ |
$777.20 |
|
| Bed Widths |
Price |
| 16" to 28" |
|
| 30" to 42" |
|
| 48" |
|
| 56" to 60" |
|
|
|
|
|
|
|
Less
Motor Only (1 HP-208/230/460/575V- |
|
|
|
3Ph.-60 Hz.).............Deduct.................... |
$282.90 |
|
|
|
*Less Reducer......Deduct........................ |
$307.40 |
|
|
|
*Less
V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
|
|
|
|
|
|
|
|
| Required
on units over 100'. Contact us with application. |
|
|
|
|
|
|
|
ELECTRICAL
CONTROLS |
|
|
|
|
|
|
|
|
|
|
(See
bottom of page) |
| GALVANIZING |
|
|
|
|
|
| Contact
us |
|
GUARD
RAILS |
|
|
|
|
|
NOTE: Available in 5’ and 10’ lengths only from
Stockyard. Contact us for other lengths. |
| OPTIONAL
DRIVES |
|
|
| Unified
Drives: (Shaft Mounted) |
|
|
|
|
Adjusted
Universal Channel Guard Rail |
| Unified Drives: |
OVERALL
FRAME WIDTH |
| 16" to 28" |
30" to 42" |
48" |
54" to 58" |
| Center Drive 8” Drive Pulley with 075 Reducer |
|
|
|
|
| Center Drive 8” Drive Pulley with 090 Reducer |
|
|
|
|
|
|
|
|
|
Both Sides............................per
foot......... |
$15.10 |
|
|
One Sides.............................per
foot......... |
$7.80 |
|
|
Angle
Type |
|
|
Type
"A" or "B" available (Specify).
Prices are for Both Sides. |
|
|
Type
"A"
1-1/2" x 1-1/2" x 12 Ga.........per foot........ |
|
| 8”
Drive Pulley |
|
|
|
|
|
$7.80 |
Speed FPM |
65 |
78 |
97 |
130 |
156 |
195 |
260 |
389 |
Max HP |
1 |
1.2* |
1 |
2 |
2 |
2 |
2 |
2** |
|
|
|
|
|
|
Type
"B"
1-1/2" x 1-1/2" x 12 Ga........per foot......... |
|
|
|
$10.90 |
|
|
Fixed
Channel Type
Prices are for Both Sides.
3-1/2" x 1-1/2" x 12 Ga........per foot......... |
|
*
Reducer size increases with 2 HP.
**Contact us. |
|
|
|
|
|
$22.50 |
|
|
6-1/2"
x 1-1/2" x 12 Ga........per foot......... |
$27.10 |
|
|
10-1/2"
x 1-1/2" x 12 Ga......per foot......... |
$38.30 |
|
|
|
|
|
13-1/2"
x 1-1/2" x 12 Ga......per foot......... |
$46.10 |
|
|
|
|
|
|
|
|
OPTIONAL
DRIVES |
| Drive Type |
OVERALL
FRAME WIDTH |
18" to 24" |
30" to 42" |
| Center Drive (V-Belt) |
|
|
| Low Elevation Side Mounted Center (C-Face) |
|
|
| Low Elevation Side Mounted Center (V-Belt) |
|
|
| Center Drive with Extended Take-Up C-Face |
|
|
| Center Drive with Extended Take-Up V-Belt |
|
|
| High
Performance Center Drive (C-Face) |
|
|
| Heavy
Duty Center Drive (C-Face) |
|
|
| End
Drive With Underside Takeup (C-Face) |
|
|
| End Drive With Underside Takeup (V-Belt) |
|
|
| Side Mounted End C-Face With Underside Take-Up |
|
|
| Side Mounted End V-Belt With Underside Take-Up |
|
|
|
#50
O-Ring Drive Chain............................Add...........................$284.40
#60 O-Ring Drive Chain............................Add...........................$406.00 |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
| ELECTRICAL
CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START
SWITCH or
SAFETY DISCONNECT |
|
 |
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$213.01 |
|
|
|
|
#033.2032
& #033.2072..................$555.67
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$332.11
Nema 4 |
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
|
#032.103.......................................... |
$854.26 |
|
|
|
 |
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
 |
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
FOOT
SWITCH WITH GUARD |
|
|
|
|
|
|
|
|
|
|
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
PHOTO
EYE, ON-OFF TYPE |
 |
|
|
|
|
|
|
|
#EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC |
|
POWER
CORD AND PLUG (20') |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER
CORD WITH PLUG ONLY 20' LONG |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1A |
115/1 |
1/2-3/4 |
|
EA-039-2A |
115/1 |
1 |
|
EA-039-3A |
115/1 |
1
1/2 |
|
EA-039-4A |
230/1 |
1/2-1 |
|
EA-039-5A |
230/1 |
1
1/2-2 |
|
EA-039-6A |
208-230/3 |
1/2-2 |
|
EA-039-7A |
460/3 |
1/2-2 |
|
|
POWER
CORD WITH PLUG 20' LONG WITH MANUAL
START SWITCH AND MOUNTING BRACKET |
Model
No. |
Voltage |
HP
Rating |
Prices |
EA-039-1B |
115/1 |
1/2-3/4 |
|
EA-039-2B |
115/1 |
1 |
|
EA-039-3B |
115/1 |
1
1/2 |
|
EA-039-4B |
230/1 |
1/2-1 |
|
EA-039-5B |
230/1 |
1
1/2-2 |
|
EA-039-6B |
208-230/3 |
1/2-2 |
|
EA-039-7B |
460/3 |
1/2-2 |
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$118.10 |
|
|
|
|
|
|
|
|
|
|
|
 |
AIR
PRESSURE SWITCH |
|
#094.191........................................$691.31
Nema 4 |
|
|
|
|
|
|
|
|
|
|
EMERG.
STOP PULL CORD SWITCH |
|
|
|
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4 |
|
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
|
#032.281...one
side.................$7.44 per / ft.
both
sides..............$15.87per
/ ft. |
|
|
|
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
|
#032.284..........................................$279.61
Nema 4 |
|
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
#032.2113
(100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2128
with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37 |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
CONTROLLER
PRICES |
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY |
SINGLE PHASE CONTROLLER INPUT |
| Motor Size |
115 Volt |
208/230 Volt |
| 1/2 |
VSC-12-10 |
VSC-12-12 |
| Price |
$1,491.84 |
$1,189.37 |
| 1 |
VSC-12-11 |
VSC-12-13 |
| Price |
$1,724.27 |
|
| 2 |
N/A |
VSC-12-14 |
| Price |
~ |
|
THREE PHASE CONTROLLER INPUT |
| Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
| 1/2 |
VSC-01-15 |
VSC-01-18 |
VSC-12-29 |
| Price |
|
|
|
| 1 |
VSC-01-16 |
VSC-01-19 |
VSC-12-29 |
| Price |
|
|
|
| 2 |
VSC-01-17 |
VSC01--20 |
VSC-12-30 |
| Price |
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS |
|
| HP |
Part No. |
Price |
| 1/2 |
032.351 230/460 |
|
| 1 |
032.353 230/460 |
|
| 2 |
032.355 230/460 |
|
| 1/2 |
032.3512 575 |
|
| 1 |
032.3532 575 |
|
| 2 |
032.3552 575 |
|
|
|
|
|
|
|
IMPORTANT
NOTES... |
|
|
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146. |
|
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$675.20 |
• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $542.68 for this option.) |
|
|
| Brake
Relay Kit (EA-068A).............................. |
$542.68 |
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE |
| Part No. |
Description |
Price |
| EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$5,058.00 |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor) |
$675.20 |
|
|
|
|
|
|
KIT INCLUDES |
|
|
|
| Part No. |
Description |
| VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
| 032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT
NOTES |
|
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets |
| Part No. |
Description |
| VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
| 032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined) |
|
|
|
An International
Electrotechnical Commission (IEC) term that means: “under short
circuit
conditions, the starter shall cause no danger to persons or installation
and shall be
suitable for further use.” The only allowable damage to the starter
is light contact burning
or tack welding, provided the contacts are separable. Starters meeting
this level of com-
ponent protection provides users with less down time and lower replacement
costs. |
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
MOTOR
DUTY |
NON-REVERSING |
REVERSING |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
208 VOLT |
230 VOLT |
460 VOLT |
575 VOLT |
PRICE |
1/2 |
STANDARD EASY
CLEAN ENERG. EFF. |
|
|
|
|
$1516.60 |
|
|
|
|
$2,023.30 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2 |
GEARMOTORS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
STANDARD EASY CLEAN
ENERG. EFF. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS |
H.P. |
NON-REVERSING |
REVERSING |
NON-REVERSING |
REVERSING |
|
115 VOLT |
PRICE |
115 VOLT |
PRICE |
230 VOLT |
PRICE |
230 VOLT |
PRICE |
1/2 |
|
$1,182.40 |
|
$2,023.30 |
|
$1,435.60 |
|
$2,023.30 |
1 |
|
|
|
|
1-1/2 |
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
| •
Manual Start-Stop Switch Kit |
|
•
Start-Stop Push Button Kit, Remote Mounted |
|
EA-000001 ...................................... |
$242.09 |
|
|
EA-000002....................................... |
$242.09 |
|
Includes:
032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware |
|
|
Includes:
033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware |
|
|
|
|
|
• Forward-Reverse-Stop Push Button Kit,
Remote Mounted |
|
|
|
|
|
|
|
•
Up-Down-Stop Push Button Kit, Remote
Mounted |
|
EA-000003....................................... |
$440.67 |
|
|
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware |
|
|
EA-000004....................................... |
$440.67 |
|
|
|
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
| •
“Start-Stop” Push-button Station |
|
•
“Start-Stop”Push-button Station |
033.1955
|
$211.23 |
|
|
033.195................................................. |
$142.50 |
| Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
| •
“Fwd-Rev-Stop” Push-button Station |
|
•
“Fwd-Rev-Stop”Push Button Station |
| 033.1965 |
$397.05 |
|
|
033.196.................................................. |
$490.95 |
| Remote
mounted, Nema 1 |
|
|
To
be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
| •
“Up-Down-Stop” Push-button Station |
|
OPTIONAL
STARTER CONTROLS |
| 033.1975 |
$397.05 |
|
|
•
Auto Restart Control, 3 Phase, Non-Reversing |
| Remote
mounted, Nema 1 |
|
|
|
EA-011
............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$3,210.68 |
|
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT
NOTES |
|
|
|
• Control Circuit Transformer Included for 115 Volt
Control Voltage.
• Above starters are in Nema 3, 4 and 12 Enclosures.
• The starters included Safety Disconnect, Overload
Relay, and Aux. Contacts as required.
• IF AN ORDER IS SUPPLIED LESS MOTOR,
AND IS SUPPLYING ANY ELECTRICAL
CONTROLS, THEN MOTOR HP, VOLTAGE,
PHASE, AND FULL LOAD CURRENT MUST BE
STATED ON THE ORDER.
• PRICING LISTED IS NOT MOUNTED OR WIRED. |
|
|
|
|
|
|
|
|
•
Auto Restart Control, 1 Phase, Non-Reversing |
|
|
EA-012
(115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket. |
$3,253.63 |
|
|
$3,391.27 |
|
|
|
| • Add on |
$192.70 |
for
the above Push Buttons |
|
|
|
| to
be Mounted. |
|
|
|
| • Add on |
$995.10 |
for
the above Starters and |
|
|
|
Push
Button Stations to be Mounted and Wired.
Supply 20'0" of cable for push button only. |
|
|
|
|
|
|
|
|
•
Mounting Brackets for photo eye |
|
|
|
|
|
|
|
|
|
|
|
#033.2122
B-05165 .............................................. |
|
|
|
|
|
|
|
$118.10 |
|
CONVEYOR
WEIGHT TABLE |
SIZE TO ORDER Overall Length "A" 4" Dia. Pulley |
Bed Length "L" |
Belt Width |
10" |
12" |
14" |
16" |
18" |
20" |
22" |
SIZE TO ORDER Overall Length "A" 6" Dia. Pulley |
24" |
28" |
30" |
34" |
36" |
42" |
48" |
54" |
Between Rail Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
45" |
51" |
57" |
Overall Frame Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
48" |
54" |
60" |
12' |
10' |
Weights (Lbs.) |
561 |
593 |
625 |
657 |
689 |
721 |
753 |
12' |
791 |
865 |
940 |
1014 |
1088 |
1162 |
1237 |
1312 |
17' |
15' |
660 |
696 |
732 |
768 |
804 |
840 |
876 |
17' |
919 |
1002 |
1085 |
1167 |
1250 |
1333 |
1415 |
1497 |
22' |
20' |
760 |
800 |
840 |
880 |
920 |
960 |
1000 |
22' |
1047 |
1138 |
1230 |
1321 |
1412 |
1503 |
1594 |
1682 |
27' |
25' |
859 |
903 |
947 |
991 |
1035 |
1079 |
1123 |
27' |
1175 |
1275 |
1375 |
1474 |
1574 |
1673 |
1773 |
1867 |
32' |
30' |
959 |
1007 |
1054 |
1102 |
1150 |
1198 |
1246 |
32' |
1304 |
1412 |
1520 |
1627 |
1735 |
1844 |
1952 |
2052 |
37' |
35' |
1058 |
1110 |
1162 |
1214 |
1266 |
1317 |
1369 |
37' |
1432 |
1548 |
1665 |
1781 |
1897 |
2014 |
2130 |
2237 |
42' |
40' |
1158 |
1213 |
1269 |
1325 |
1381 |
1437 |
1492 |
42' |
1560 |
1685 |
1810 |
1934 |
2059 |
2184 |
2309 |
2422 |
47' |
45' |
1257 |
1317 |
1377 |
1436 |
1496 |
1556 |
1616 |
47' |
1688 |
1821 |
1955 |
2088 |
2221 |
2355 |
2488 |
2607 |
52' |
50' |
1357 |
1420 |
1484 |
1548 |
1612 |
1675 |
1739 |
52' |
1816 |
1958 |
2100 |
2241 |
2383 |
2525 |
2667 |
2792 |
57' |
55' |
1456 |
1524 |
1592 |
1659 |
1727 |
1794 |
1862 |
57' |
1944 |
2094 |
2245 |
2395 |
2545 |
2695 |
2845 |
2977 |
62' |
60' |
1556 |
1627 |
1699 |
1771 |
1842 |
1914 |
1985 |
62' |
2072 |
2231 |
2390 |
2548 |
2707 |
2865 |
3024 |
3162 |
67' |
65' |
1655 |
1731 |
1806 |
1882 |
1957 |
2033 |
2109 |
67' |
2200 |
2367 |
2535 |
2702 |
2869 |
3036 |
3203 |
3347 |
72' |
70' |
1755 |
1834 |
1914 |
1993 |
2073 |
2152 |
2232 |
72' |
2328 |
2504 |
2680 |
2855 |
3031 |
3206 |
3382 |
3532 |
77' |
75' |
1854 |
1938 |
2021 |
2105 |
2188 |
2272 |
2355 |
77' |
2456 |
2640 |
2825 |
3009 |
3193 |
3376 |
3560 |
3717 |
82' |
80' |
1954 |
2041 |
2129 |
2216 |
2303 |
2391 |
2478 |
82' |
2585 |
2777 |
2970 |
3162 |
3354 |
3547 |
3739 |
3902 |
87' |
85' |
2053 |
2145 |
2236 |
2327 |
2419 |
2510 |
2601 |
87' |
2713 |
2914 |
3115 |
3315 |
3516 |
3717 |
3918 |
4087 |
92' |
90' |
2153 |
2248 |
2343 |
2439 |
2534 |
2629 |
2725 |
92' |
2841 |
3050 |
3260 |
3469 |
3678 |
3887 |
4097 |
4272 |
97' |
95' |
2252 |
2352 |
2451 |
2550 |
2649 |
2749 |
2848 |
97' |
2969 |
3187 |
3405 |
3622 |
3840 |
4058 |
4275 |
4457 |
102' |
100' |
2352 |
2455 |
2558 |
2662 |
2765 |
2868 |
2971 |
102' |
3097 |
3323 |
3550 |
3776 |
4002 |
4228 |
4454 |
4642 |
|
| All
weights are conveyor weights only. Accessories, crating, etc., are
not included. |
|
|
|
Belt Conveyors, Conveyor,
Conveyor Belt, Low Profile Conveyor, Conveyors, and Slider Bed from your
source for material handling
equipment. |
Back to Product Page
|
| HOME /
ORDER / SEARCH
/
QUOTE /
CONTACT US / ABOUT
US /
MY ACCOUNT/
SHOPPING CART |
|
