Back to Product Page
ATR
SERIES AIR TOOL REEL BALANCER
|
|
![](images/atr_series.jpg) |
|
|
|
|
|
The
Air Tool Reel provides an air hose and ratchet mechanism that
allows a tool to stay suspended. To disengage the ratchet and
enable the hose to retract, simply pull lightly on the hose. The reel
comes with a standard 6.5 foot (2.0 m) 3/8 hose. Additional hose
can be added in 3.28, 6.56, and 9.84 foot (1, 2, and 3 meter)
lengths. The reel also is made with a fall prevention device. In the
case the spring breaks, the device prevents the tool from falling and
becoming damaged. Available as both a hood mount (ATR-5) and
as a wall mount (ATR-5-1). |
|
|
|
|
|
|
Hook, wall, or ceiling mount.
Tension adjustment is easy and precise.
High impact ABS case and a forged swivel hook. |
|
|
|
|
|
|
|
|
|
|
|
![tool balancer](images/drawing.jpg) |
|
|
|
![](images/model_no_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
PRICE |
Model
No. |
Max. Tension |
Max.
Pressure |
Hose
Travel ft |
Wt
(lb) |
PRICES |
N |
Foot lbs |
Bar |
PSI |
ATR-5 |
49 |
11 |
10 |
142 |
6.5 |
8.4 |
$777.90 |
|
49 |
11 |
10 |
142 |
6.5 |
9.3 |
$833.80 |
|
|
Features
and Benefits |
|
Advantages
of Using an ENDO Spring Balancer: |
ENDO
Spring Balancers are a valuable addition to your
assembly line. They support heavy tools with cable tension
equal to the weight of the suspended tools, which makes
them seem virtually "weightless". As the tool is repositioned
the balancer extends or retracts the support cable to follow
the tool's movements. Constant tension on the cable is
accomplished with a spring motor and a tapered drum.
The assembler has the flexibility to reposition the tool,
while experiencing comfortable operation and less fatigue.
Similar to a Balancer is the Retractor, which does not
have a tapered drum. The tension on the cable increases
as the cable is extended |
Suspend
tools in assembly lines or other work areas
Help the assembler with repetitive tasks such as
installing fasteners: screws, nuts, bolts, etc.
Hold fixtures, tools, welding guns, and similar
equipment
Improves efficiency and diminishes worker fatigue
Stabilizes tool positioning and contributes to work
accuracy
Contributes to a safer working environment
Keeps fixtures, tools, and welding guns off of the floor
and clean.
Eliminates the need to separately power the balancer |
|
|
|
Application
Guidelines |
Size the balancer to carry the total weight to be balanced - tool plus all
accessories - and stroke (maximum to
minimum height) required.
Size to the upper end of the capacity range of the balancer when
possible.
Always attach secondary support cable(s) to the eyelet provided for
additional safety.
Balancers are normally hung vertically and the rope is pulled out
vertically. To prevent the rope from wearing on the
guide, the rope should not be pulled out at an angle to the
balancer body. The balancer can also be mounted
horizontally, however a pulley system must be employed to guide
the rope straight out of the balancer then down to
the tool. Again, care must be taken to prevent the rope from
wearing on the guide. A trolley and rail system can be
used to help the balancer adjust to changing angles.
If multiple balancers are used in close together, install them at
staggered heights to keep them from hitting each other
The spring tension is factory preset to the mid-range of the rated
capacity. To adjust the tension turn the worm gear
or spindle clockwise to increase the tension and counterclockwise
to decrease the tension. |
|
Air Tool Reel Balancer, Pneumatic
Tool Reel Balancer, Tool Balancer, Tool Reel, Air Balancer, Air Tool Balancer,
Air Tool Retractor, Pneumatic Tool Retractors, Air Tool Reel, and Air
Balancers from your source for material
handling equipment. |
Back to Product Page
|