|
|
|
|
|
|
ADA
STANDARD FOR ACCESSIBLE DESIGN
|
|
|
|
|
|
| PRODUCT
DETAILS |
|
|
|
|
|
You can find our 5420 ADA single tier metal locker in schools
and locker rooms all over the USA. Use this 1 door
locker alone or combine it with more lockers to create a full
locker system. We proudly manufacture this locker in
the USA. We offer these lockers with a durable powder coat finish
available in either Dove Gray or Putty. |
|
|
|
|
|
Our
5420 ADA single tier steel locker includes 16-gauge, one piece
doors and 24-gauge body parts. We laps and
welds the door frame corners to create a strong and rigid assembly.
The 6-inch-wide door louvers provide ventilation
for the interior of the locker. A lower shelf inside the locker
meets ADA requirements by bringing the bottom of the
locker up to 15 inches off of the finished floor. Each locker
includes a double prong hook and three single prong
hooks for hanging coats or bags. Use the included handicap sticker
to help others quickly identify this locker as
reserved for ADA use. |
|
|
|
|
|
| NANO-ROLLER
TECHNOLOGY |
|
|
|
|
|
The
spring loaded turn handle meets ADA requirements and can be
opened without a twisting or clasping motion.
The handle includes a hasp that can be secured with a user provided
padlock. This 1 tier locker features Lyon’s
patent pending Metal Nano-Roller Latching System. Our unique
lockbar system on the 5420 ADA single tier
door engages both the top and bottom of the frame for additional
protection against break-ins. The tamper-resistant
nylon lockbar guide ensures a smooth operation and reduces overall
noise from opening and closing. |
|
|
|
|
|
| ASSEMBLY
AND INSTALLATION |
|
|
|
|
|
You
can order the 5420 ADA single tier locker either unassembled
or assembled. Easily put this locker together in
the field with nuts and bolts. The door and frame ship as one
piece ready to attach to the sides and back of the
locker. To save yourself even more time, you can order this
locker assembled and we will professionally assemble
the locker for you. Our assembly team uses pop rivets in place
of using nuts and bolts. Using pop rivets ensures a
strong and durable assembly. |
|
|
|
|
|
We
recommend you properly anchor your new 5420 ADA single tier
lockers at the time of installation. We strongly recommends
that you anchor your lockers to either the wall or floor or
both if possible. Adding Our Anchor Angles
help prevent lockers without legs from tipping over when they
are top heavy. |
|
|
|
|
|
| ADA
REQUIREMENTS |
|
|
|
|
|
1.
Doors must be able to be
opened without a twisting
or clasping motion. |
|
2.
The locker shelf or hooks
cannot exceed 48” from the
finished floor. The shelf and
hooks can be relocated during
set up. |
|
3.
The locker bottom must be a
minimum of 15” from the finished
floor. This is accomplished by
locating a shelf near the locker
bottom. |
|
|
|
|
|
|
|
|
The
standard test for this
compliance is if the door can
be opened with closed fingers. |
|
|
Additional
shelves can be
purchased separately. |
|
|
|
|
