Drum Grabs, Drum Handlers, Drum Handling, Drum Lifters, Transport Loaded Containers

LKG

LK Goodwin Co. Material Handling Equipment

Toll Free: 1-800-343-2478

Back to Product Page

MODEL 186 & 186M
ADJUSTO-KARRIERS


		ADJUSTS TO VARIOUS DIAMETER DRUMS

		Adjust for 15” to 23” (38.1 to 58.4 cm) Diameter Steel or Fiber Drum Unique pads conform to drum for a secure grip Turn drum 360° in either direction Handle drum with crane, hoist or chain block Controlled high-level drum pouring Capacity: 500 Lb. (227 kg)

		Use Adjusto-Karrier to pour into high chutes, hoppers, vessels, etc. Adjust to fit 15” to 23” (38.1 to 58.4 cm) diameter drum. Unique nylon core grip pads have nitrile blend cover, and conform curvature of drum. Hand operated pull chain with geared tilt control to control drum pouring angle above a person’s reach. The 30:1 gears are equipped with safety covers. Handle a fiber or steel drum with or without ribs. Do NOT use with plastic drum.


To secure drum in Adjusto-Karrier, back-off the adjusting screws with the removable crank furnished. Center rods are threaded adjusting screw with additional guide rods on each side. Hoist up over drum and lower so grip pads aline with center of load. Turn adjusting screws to tighten grip pads and hold drum approximately centered in holder frame. Turn adjusting crank to “feel” resistance of pressure being applied and prevent denting or crushing container		When handling successive drums of the same diameter, grip and release involves just one adjusting screw. The other one need not be readjusted until a different diameter is encountered. Then, readjust to center new drum.

MODEL 186

HANDLES	15 to 23" (38.1-58.4 cm) Drum Diameter
DIMENSION A	34-3/8" (87.3 cm)
DIMENSION B	48-1/8" (122.2 cm)
DIMENSION C	28-3/4" (73 cm)
DIMENSION D	Drum Diameter +20" (50.8 cm)
DIMENSION E	24-1/2" (62.2 cm)

Also available 186M Adjusto-Karrier in Spark Resistant Parts.
Prices are upon request.


TILT CONTROL OPTIONS

		Option X02-186 Factory installed 9” (22.9 cm) Hand Crank						Option X03-186 Factory installed 16” (40.6 cm) Diameter Hand Wheel

		Part #5U-P Hand Crank for customer to install



			3900I-P
			Factory Installed MORStop Tilt-Brake on NEW manual tilt drum handler. Auto holds drum tilt angle until you move it.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

Model 186 & Options Prices

Model No.	Description	Price
MODEL 186	15" to 23" Drum Diameter	$1,772.00
MODEL 186M	MODEL 186 With Spark Resistant Parts	Contact Us
Options
X02-186	Hand Crank	$132.70
X03-186	16" Hand Wheel	$222.70
5U-P	9" Hand Crank with 3/4" Socket Tube	$93.60
3900i-P	MORStop Tilt-Brake Factory installed on new unit	$269.00
3900-P	KIT, MORStop Tilt-Brake, Field Install	$269.00

Transport Loaded Containers, Adjusto-Karriers, Drum Grabs, Drum Handlers, Drum Handling, Drum Lifters,
Barrel Handling, Drum Carriers, Drum Dumpers, Drum Handling Equipment, Drum Lift, Drum Lifting Equipment, and
Drum Stackers from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART