Back to Product Page
SEQ
SERIES ELECTRIC CHAIN HOISTS
DUAL SPEED (VFD CONTROL) |
|
|
 |
|
 |
|
 |
|
|
SEQ010SD |
|
SEQP010SD |
|
SEQG010SD |
|
|
|
|
|
|
|
|
SEE
BELOW FOR PRICES, SPECIFICATIONS AND DIMENSIONS |
|
|
 |
|
|
|
 |
|
|
V A R
I A B L E F R E Q U E N C Y D R I V E – V F D
(INVERTER FOR SMOOTH TRANSITIONAL SPEED) |
|
The
dual speed inverter delivers smoother movement than contactor control which
reduces load swing. The inverter
can be programmed to operate specific to the application, resulting in smooth
starts, improved control, improved
positioning accuracy and overall increased productivity. Standard lifting
speed ratio is 6:1. Standard traversing
speed ratio is 6:1 adjustable to 10:1.
A no-load high-speed function is a standard feature, allowing its hoisting
speed to move 1.3 times faster during no-
load operation. When the no-load condition is detected by the inverter,
this function is activated automatically
switching to high-speed operation, leading to improved work efficiency with
ease and safety. The function is easily
activated (ON/OFF) with the push button control.
EQ, EQM and SEQ inverter units are well-customized for lifting/traversing
applications including exclusive software,
and are also provided with measures against impact and heat, which were
verified through long-run tests. |
|
 |
|
| Product
Code for SEQ Series |
|
 |
|
SEQ
Electric Chain Hoist Hook or Suspension Bar Mount |
|
|
|
|
|
|
SEQ
Series single-phase dual speed (VFD Control) electric chain hoists are designed
for
easy installation and operation in medium- and heavy-duty industrial applications.
These
hoists have an extremely compact and lightweight body and are perfect for
any work station
application. The SEQ hoist includes a no-load high-speed function that automatically
increases hoist speed up to 130 percent when the load is less than 30 percent
of working
load limit. |
|
|
|
|
Standard
Hoist Specifications |
|
Capacity
Range - 1/8 Ton – 1 Ton
Standard Voltage - 115/230-1-60
Control Voltage - 24V
Duty Cycle* - 30/10 Min.
Classification* - ASME H4 ISO 1/8-1/2T M6; 1T M5 FEM 1/8-1/2T 3m;
1T 2m
Conformance - UL 508, 508A, 1004 CSA C22.2 NO. 33, 14-13, 66
Ratings - Hoist – IP55, Pendant – IP65
Chain Falls - Single chain fall all capacities
Standard Lift - 10' (longer lifts available)
Standard Pendant Drop - 4' less than lift (longer drops available)
Standard Power Supply Length - 15' (longer lengths available)
Mounting - Hook, suspension bar or trolley
Standard Pendants - 2-button (momentary contacts) with emergency
On/Off (maintained
contacts)
Chain Containers - Standard plastic
Operating Conditions - Recommended for -4° to +104° F and
humidity of 85% or less |
|
|
|
| SEQ010SD |
|
|
|
|
|
| Features
and Benefits |
|
Pull-Rotor
Motor Brake - Extremely durable and reliable, this advanced design contains
no brake coil to fail like
conventional disc brakes.
External Motor Fan - Functions to quickly eliminate resistor, motor
and brake heat. This results in improved hoist
duty rating and greatly lengthens brake life. Motor is totally enclosed,
fan cooled (TEFC).
Precision Machined Helical Gears - Immersed in oil bath lubrication
results in quiet, smooth and cool operation.
Chain Container - Durable plastic containers are standard.
Corrosion Resistant Load Chain - Nickel-plated, Grade 80, DIN chain
for superb durability and strength.
Forged Carbon Steel Hooks - Under excessive loads will open gradually
and not fracture. Ball bearings produce
smooth rotation. Bottom hook will swivel 360°. Heavy-duty hook latches
are standard.
Optional Suspension Bar - For low headroom or enclosed track trolley
applications. Easily changed from top hook
to suspension bar.
Compact Aluminum Body - Die-cast body is lightweight and offers low
headroom – one of the best in the industry.
Paint is electrostatically applied.
Completely Sealed Body- Suitable for both indoor and outdoor applications,
including harsh environments. (Consult
Owner’s Manual for details.) Gaskets throughout the hoist provide for
an IP55 rating.
Variable Frequency Drive (VFD) - Dual speed controls via “under-the-cover”
variable frequency drive for both
single-phase and three-phase hoists. VFD includes count hour meter, load
limiter and no-load high-speed function.
Long Life Friction Clutch - Protects hoist from damage and prevents
overwinding.
Upper/Lower Limit Switch - Low profile upper and lower limit switches
provide excellent headroom.
Unique Chain Guide - Provides quiet and smooth guiding of chain.
Heavy cast iron construction for improved wear
versus stamped steel design offered by many manufacturers.
Durable Push Button Pendant - Easy-to-use, one-handed operation.
Rated IP65. Standard control voltage is 24V.
Strain relief wire is molded to pendant cord for added support and dependability.
E-Stop is standard on all pendants.
Extreme Duty Motor - Increased performance through 30/10-minute duty
rating, H4 classification, Class B insulation,
cooling fins and external thermal motor protection.
Load Sheave - Five deep-groove pockets fully support the load chain
during operation. Reduces vibration and chain
wear. Provides true vertical lift.
Operating Conditions - Recommended for -4° to +104°F and
humidity of 85% or less. |
|
 |
|
SEQ 1
- PHASE DUAL SPEED VFD HOIST - SPECIFICATIONS |
Cap.
(Tons) |
Model
No. |
²Std
Lift
(Ft) |
Push
Button
Cord
L
(ft) |
Hoist¹ 1-Phase 60 Hz |
Load
Chain
Dia.
(mm)
x Chain
Fall Lines |
Net
Wt.
(lbs.) |
Wt.
for
Additional
1 Foot of
Lift (lbs) |
Lifting
Speed² (ft/min) |
Output
(Hp) |
Rated
Current (amps) |
High |
Low |
No
Load
High
Speed |
@115V |
@230V |
1/8 |
SEQ001SD |
10 |
8.2 |
56 |
9.3 |
72 |
0.67 |
10.8 |
5.7 |
5.6
x 1 |
71 |
0.48 |
1/4 |
SEQ003SD |
33 |
5.5 |
43 |
12.1 |
6.4 |
1/2 |
SEQ005SD |
25 |
4.2 |
32 |
1.0 |
14.6 |
7.8 |
75 |
1 |
SEQ010SD |
17 |
3.9 |
22 |
1.3 |
18.7 |
9.9 |
7.1
x 1 |
97 |
0.77 |
|
¹)
Hoists are voltage re-connectable between 115/230V
²) Speeds
are adjustable between low and high speed |
|
SEQ 1
- PHASE DUAL SPEED VFD HOIST - DIMENSIONS |
Cap.
(Tons) |
Model
No. |
Headroom
C (in) |
D
(in) |
a
(in) |
b
(in) |
d
(in) |
e
(in) |
f
(in) |
g
(in) |
h
(in) |
I
(in) |
Top
Hook |
Susp.
Bar |
Top
Hook |
Susp.
Bar |
1/8 |
SEQ001SD |
17.3 |
15.6 |
21.0 |
19.1 |
16.4 |
14.4 |
9.1 |
7.4 |
11.7 |
1.1 |
5.4 |
5.0 |
1/4 |
SEQ003SD |
1/2 |
SEQ005SD |
18.0 |
16.1 |
1 |
SEQ010SD |
20.7 |
18.3 |
23.5 |
21.1 |
17.0 |
15.9 |
9.6 |
13.1 |
1.2 |
6.1 |
5.6 |
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
PRICES
FOR EQ SERIES with Plastic Chain Container (Top Hook or Suspension Bar) |
Cap.
(Tons) |
Model
No. |
Lift
Spd
(FPM) |
Price
- Standard Lifts |
Max.
Lift
w/Plastic Chain Cont. |
Load
Chain |
Push
Button
Cord |
Total |
Wt.
10'
lift
(lbs.) |
10' |
15' |
20' |
| 1/8 |
SEQ001SD |
56/9 |
|
|
|
20 |
$19.20 |
$8.90 |
$28.00 |
71 |
| 1/4 |
SEQ003SD |
33/6 |
|
|
|
20 |
71 |
| 1/2 |
SEQ005SD |
25/4 |
|
|
|
20 |
75 |
| 1 |
SEQ010SD |
17/4 |
|
|
|
20 |
$23.10 |
$31.90 |
97 |
|
Standard
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook.
For lifts or push button cord lengths other than standard, use 10 ft. base
price plus adders for load chain and push button cord.
For lift and pendant length limitations, consult us.
Standard power supply cord is 15 ft. Extra per ft. is $8.60.
Cable support hangers included for every 5 ft. of power supply cord.
Thermal protection is standard.
*Top hook suspension is standard. Suspension bar is available as an option
at no charge. |
|
PRICES
FOR Optional Longer Lift Canvas Chain Containers |
Cap.
(Tons) |
Model
No. |
Prices |
Maximum
Lift (ft.) |
1/8-1/2 |
EQ1CI1405 |
|
49 |
|
|
SEQP
and SEQG Electric Chain Hoists with Push or Geared Trolleys |
|
|
|
|
|
|
|
|
|
Mounting the
SEQ Series single-phase dual speed
(VFD Control) electric chain hoist to our PT push or GT
geared trolley will create an easy and economical method of
transporting the load. This combination is ideal for work-
stations and infrequent moves. |
|
|
|
|
|
Standard
Hoist Specifications |
|
|
Capacity Range - 1/8 Ton – 1 Ton
Shafts - Standard shafts fit wide range Longer shafts for
wider beams Spacers for easy adjustments
Drop Stops - Standard
Bumpers - Optional
Standard Hand Chain Drop - On geared trolleys 2' less
than lift (longer drops available)
Wheels - All steel. Sealed ball bearings. Fit flat or tapered
beam flange
Standard Hoist Pendant Drop - 4' less than lift (longer
drops available)
Standard Hoist Power Supply Length - 15' (longer lengths
available)
Standard Pendants - 2-button (momentary contacts) with
emergency On/Off (maintained contacts) |
|
|
|
SEQP010SD |
|
SEQG010SD |
|
|
|
|
|
|
|
| Features
and Benefits |
|
Pull-Rotor
Motor Brake - Extremely durable and reliable, this advanced design contains
no brake coil to fail like
conventional disc brakes.
External Motor Fan - Functions to quickly eliminate resistor, motor
and brake heat. This results in improved hoist
duty rating and greatly lengthens brake life. Motor is totally enclosed,
fan cooled (TEFC).
Precision Machined Helical Gears - Immersed in oil bath lubrication
results in quiet, smooth and cool operation.
Chain Container - Durable plastic containers are standard.
Corrosion Resistant Load Chain - Nickel-plated, Grade 80, DIN chain
for superb durability and strength.
Forged Carbon Steel Hooks - Under excessive loads will open gradually
and not fracture. Ball bearings produce
smooth rotation. Bottom hook will swivel 360°. Heavy-duty hook latches
are standard.
Compact Aluminum Body - Die-cast body is lightweight and offers low
headroom – one of the best in the industry.
Paint is electrostatically applied.
Completely Sealed Body- Suitable for both indoor and outdoor applications,
including harsh environments. (Consult
Owner’s Manual for details.) Gaskets throughout the hoist provide for
an IP55 rating.
Variable Frequency Drive (VFD) - Dual speed controls via “under-the-cover”
variable frequency drive for both
single-phase and three-phase hoists. VFD includes count hour meter, load
limiter and no-load high-speed function.
Long Life Friction Clutch - Protects hoist from damage and prevents
overwinding.
Upper/Lower Limit Switch - Low profile upper and lower limit switches
provide excellent headroom.
Unique Chain Guide - Provides quiet and smooth guiding of chain.
Heavy cast iron construction for improved wear
versus stamped steel design offered by many manufacturers.
Durable Push Button Pendant - Easy-to-use, one-handed operation.
Rated IP65. Standard control voltage is 24V.
Strain relief wire is molded to pendant cord for added support and dependability.
E-Stop is standard on all pendants.
Extreme Duty Motor - Increased performance through 30/10-minute duty
rating, H4 classification, Class B insulation,
cooling fins and external thermal motor protection.
Load Sheave - Five deep-groove pockets fully support the load chain
during operation. Reduces vibration and chain
wear. Provides true vertical lift.
Operating Conditions - Recommended for -4° to +104°F and
humidity of 85% or less. |
|
|
 |
|
|
SEQ 1
- PHASE DUAL SPEED VFD HOIST WITH PUSH OR GEARED TROLLEY - SPECIFICATIONS |
Cap.
(Tons) |
Model
No. |
Std
Lift
(Ft) |
Push
Button
Cord
L
(ft) |
Hoist¹ 1-Phase 60 Hz |
Flange
Width Adjustability³
B (in) |
Min.³*
Allow
Radius
for
Curve
(in) |
Load
Chain
Dia
(mm) x Chain
Fall
Lines |
Net
Wt.*
(lbs.) |
Wt.
for
Additional
1 Foot
of Lift
(lbs) |
| Lifting
Speed²(ft/min) |
Output
(Hp) |
Rated
Current (amps) |
| High |
Low |
No
Load
High
Speed |
@115V |
@230V |
Standard |
Optional |
| 1/8 |
SEQ(P/G)001SD |
10 |
8.2 |
56 |
9.3 |
72 |
0.67 |
10.8 |
5.7 |
2.28
to
4.00
(2.28
to
5.00) |
4.01
to 8.00
(5.01 to
8.00) or
8.01 to
12.00 |
43.3
(51.2) |
5.6
x 1 |
75
(97) |
0.48 |
75
(99) |
| 12.1 |
6.4 |
79
(104) |
| 1/4 |
SEQ(P/G)003SD |
33 |
5.5 |
43 |
| 25 |
4.2 |
32 |
1.0 |
14.6 |
7.8 |
2.28
to 5.00 |
5.01
to
8.00 or
8.01 to
12.00 |
51.2 |
7.1
x 1 |
108
(123) |
0.77 |
| 1/2 |
SEQ(P/G)005SD |
| 1 |
SEQ(P/G)010SD |
17 |
3.9 |
22 |
1.3 |
18.7 |
9.9 |
|
¹)
Although different voltages are shown, motors are NOT re-connectable and
voltage can NOT be changed due to electrical com-
ponents being voltage specific.
²) Speeds are adjustable between
low and high speed.
³) Figures in parentheses are
data for geared trolley if different than push trolley.
* Minimum Flange Width for curved beam: 1 Ton Push and 1/8
to 1 Ton Geared = 2.87 in. |
|
SEQ 1
- PHASE DUAL SPEED VFD HOIST WITH PUSH TROLLEY - DIMENSIONS |
Cap.
(Tons) |
Model
No. |
Headroom
C (in) |
D
(in) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
| 1/8 |
SEQP001SD |
16.3 |
19.9 |
10.4 |
7.2 |
1.8 |
1.1 |
3.2 |
2.4 |
0.75 |
3.0 |
1.9 |
3.3 |
1.5 |
0.87 |
| 1/4 |
SEQP003SD |
| 1/2 |
SEQP005SD |
16.9 |
| 1 |
SEQP010SD |
19.3 |
22.2 |
11.2 |
9.3 |
2.2 |
1.2 |
4.2 |
2.8 |
0.98 |
3.7 |
2.2 |
4.4 |
2.0 |
0.98 |
|
|
SEQ 1
- PHASE DUAL SPEED VFD HOIST WITH GEARED TROLLEY - DIMENSIONS |
Cap.
(Tons) |
Model
No. |
Headroom
C (in) |
D
(in) |
E
(in) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
k¹
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
u
(in) |
| 1/8 |
SEQG001SD |
16.7 |
20.3 |
10.5 |
20.9 |
9.3 |
13.3 |
1.1 |
4.2 |
2.8 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1/4 |
SEQG003SD |
| 1/2 |
SEQG005SD |
17.3 |
| 1 |
SEQG010SD |
19.3 |
22.2 |
1.2 |
|
|
|
|
|
Order
Online, by Phone, or by E-mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
PRICES
FOR SEQP SERIES with Plastic Chain Container (Push Trolley) |
Cap.
(Tons) |
Model
No. |
Lift
Std
(FPM) |
Price
- Standard Lifts |
Max.
Lift
w/Plastic Chain Cont. |
Load
Chain |
Push
Button
Cord |
Total |
Wt.
10'
lift
(lbs.) |
10' |
15' |
20' |
1/8 |
SEQP001SD |
56/9 |
|
|
|
20 |
|
|
|
75 |
1/4 |
SEQP003SD |
33/6 |
|
|
|
20 |
75 |
1/2 |
SEQP005SD |
25/4 |
|
|
|
20 |
79 |
1 |
SEQP010SD |
17/4 |
|
|
|
20 |
|
|
108 |
|
|
PRICES
FOR SEQG SERIES with Plastic Chain Container (Geared Trolley) |
Cap.
(Tons) |
Model
No. |
Lift
Std (FPM) |
Price
- Standard Lifts |
Max.
Lift w/Plastic Chain Cont. |
Load
Chain |
Push
Button Cord |
Hand
Chain |
Total |
Wt.
10' lift (lbs.) |
10' |
15' |
20' |
1/8 |
SEQG001SD |
56/9 |
|
|
|
20 |
|
|
|
|
97 |
1/4 |
SEQG003SD |
33/6 |
|
|
|
20 |
99 |
1/2 |
SEQG005SD |
25/4 |
|
|
|
20 |
104 |
1 |
SEQG010SD |
17/4 |
|
|
|
20 |
|
|
123 |
|
Standard
pendant hangs approximately 4 ft. above the hoist's fully extended bottom
hook.
For lifts or push button cord lengths other than standard, use 10 ft. base
price plus adders for load chain and push button cord.
For lift and pendant length limitations, consult us.
Standard power supply cord is 15 ft. Extra per ft. is $8.60
Cable support hangers included for every 5 ft. of power supply cord.
Thermal protection is standard.
Standard trolley hand chain drop is 2 ft. less than lift. (For Geared Trolley
only)
Suspension bar is standard. |
|
PRICES
FOR Manual Trolley Shaft Extenders |
Cap.
(Tons) |
Std.
Flange Width (in.) |
Flange
Width w/Ext. Shaft (in.) |
Prices |
1/8-1/2 |
2.28-4.00 |
4.01-8.00 |
|
8.01-12.00 |
|
*1 |
2.28-5.00 |
5.01-8.00 |
|
8.01-12.00 |
|
|
For
flange ranges beyond this chart, consult Customer Service.
Pricing applies only when purchased with PT or GT trolleys.
*Geared trolleys 1 Ton and under use 1 Ton shaft extender. |
|
Options
and Technical Data |
|
SPEED
COMPARISONS |
|
 |
|
| VFD
HOIST CONTROL DESCRIPTIONS |
|
The
dual speed inverter delivers smoother movement than contactor control which
reduces load swing. The inverter
can be programmed to operate specific to the application, resulting in smooth
starts, improved control, improved
positioning accuracy and overall increased productivity. Standard lifting
speed ratio is 6:1. Standard traversing
speed ratio is 6:1 adjustable to 10:1. |
|
A
no-load high-speed function is a standard feature, allowing its hoisting
speed to move 1.3 times faster during no-
load operation. When the no-load condition is detected by the inverter,
this function is activated automatically
switching to high-speed operation, leading to improved work efficiency with
ease and safety. The function is
easily activated (ON/OFF) with the push button control. |
|
EQ,
EQM and SEQ inverter units are well-customized for lifting/traversing applications
including exclusive
software, and are also provided with measures against impact and heat, which
were verified through long-run tests. |
|
 |
|
Duty
Classifications |
|
 |
| The
grade symbols are identical to those of ASME HST-1M. (Performance standard
for Electric Chain Hoist) |
|
 |
| This
classification refers to ISO 4301-1 and applies to the mechanical components
including gears and bearings except for consumable parts. |
|
| COMPLIANCE |
|
These
electric chain hoists are produced to comply with:
• CSA Std. C22.2 No 33-M1984 (R2004), “Construction and Test of
Electrical Cranes and Hoists”
• CSA Std. C22.2 No 14-13, “Industrial Control Equipment”
• CSA Std. C22.2 No. 66.1-06 (R2011), “Low Voltage Transformer-Part
I: General Requirements”
• ANSI/UL508 (17th Edition), “Industrial Control Equipment”
• ANSI/UL508A (First Edition), “Industrial Control Panels”
• ANSI/UL 1004 (First Edition), “Rotating Electrical Machines”
• ANSI/NFPA 70, “National Electrical Code”
• ANSI/ASME B30.16, “Safety Standard—Overhead Hoists (Underhung)”
• ANSI/ASME HST—1M, “Performance Standard for Electric Chain
Hoists” manual and electric-powered trolleys are
produced to comply with the trolley-related requirements of:
• OSHA Section 1910.179 of Title 29, “Occupational Safety and
Health Regulations — Overhead and Gantry Cranes”
• ANSI/ASME B30.11, “Safety Standard—Monorails and Underhung
Cranes”
• ANSI/ASME B30.17, “Safety Standard—Overhead and Gantry
Cranes (Top Running Bridge, Single Girder,
Underhung Hoist)” |
|
|
 |
|
|
Harrington SEQ Series Electric
Hoist, SEQP Electric Hoist, SEQG Hoist, Three Phase Dual Speed, Chain
Hoist, Chain Containers,
Electric Chain Hoists, Three Phase, Hook or Suspension Bar Mount, Electric
Chain Hoist with Motorized Trolleys, Electric Chain
Hoists with Push or Geared Trolleys from your source for material handling
equipment. |
Back to Product Page
|
| HOME /
ORDER / SEARCH
/
QUOTE /
CONTACT US / ABOUT
US /
MY ACCOUNT/
SHOPPING CART |
|
