|
Descriptions |
Specifications |
Price |
Oversized
Platform |
Platforms can be increased in width and length up to additional
24". Side and end load
capacities are derated 2% per inch of increase and oversized
models must be lagged to the floor. |
$315.65 |
Platform with
Beveled Edges |
Welded at 30 degree angles, increases the standard platform
by 4" on all sides. |
$583.15 |
Electro-Mechanical
Toe Guard |
Mounted to the under side of the platform, adds 4"
on all sides. |
$663.40 |
|
Pit Mounted Units |
For ground level applications require either a Platform
with Beveled Edges or Electro-Mechanical
Toe Guards. Lifting Eyes required for installation and
External Motor recommended. |
See Option Above |
|
Lifting Eyes |
Provided for installation and transporting of unit with
a sling or lifting chain |
$171.20 |
|
Portable Units |
Wheeled dolly handle and two 5" fixed wheels (specify
side or end mounting) for moving empty
lifts. Overall lowered height is not changed when unit
is in an operating position. |
See below |
|
* XL models |
$358.45 |
|
* X3W and X4W models |
$411.95 |
|
*Oversized Platform & other models |
Call |
|
Transportable Units |
6" steel casters, two fixed and two swivel, and a
floor lock mounted underneath base frame.
Adds 9 3/4" to the lowered height. |
|
* XL models |
$572.45 |
|
* X3W and X4W models |
$625.95 |
|
* Oversized Platform & other models |
Call |
|
Ball Transfer Tops |
For multi directional movement of work loads, available
for all load weights.
Adds 2" to overall lowered height. |
Call |
|
V Grooved Wheels |
5" steel wheels for Transportable Units only, sold
per pair. |
$315.65 |
|
Fork Pockets |
Used for moving scissor lifts between work stations. |
Call |
|
Turntables |
Constructed of 1/2" steel plate and mounted on a
24"x24" base plate equipped with a pivot pin
captured
bearing and four 1 3/4 cam followers. Base has mounting
holes for lagging unit to table top, floor stand, floor
mounting available. Capacities conform to desired work
load. Note: Turntables add 2-3/4" to overall height.
Heavy duty & custom designs available. |
|
24" x 24", 200 lbs. |
$556.40 |
|
24" x 36", 250 lbs. |
$647.35 |
|
36" x 36", 300 lbs. |
$722.25 |
|
36" x 48", 350 lbs. |
$786.45 |
|
42" x 48", 425 lbs. |
$872.05 |
|
48" x 48", 450 lbs. |
$904.15 |
|
48" x 56", 500 lbs. |
$984.40 |
|
Detent Stops |
Spring activated stops for a Turntable, standard stops
positioned at 90 degree increments |
$181.90 |
|
Conveyor Top |
Mounted to the lift table platform these 1.9" diameter
rollers on 3" center have a 1000 lb
capacity per linear foot. Adds 4" to overall height
|
See below |
|
24" x 36" platform |
Call |
|
24" x 48" platform |
Call |
|
24" x 64" platform |
Call |
|
Custom sizes and designs available |
Call |
|
Conveyor Sides |
Used to retain product on conveyor tops, recommend on
all Transporting Units. |
|
* Fixed 3" sides |
Call |
|
* Movable 3" sides |
Call |
Optional Top
Material |
For special handling of loads, v tops, aluminum material,
stainless steel, diamond plate, etc. |
Call |
|
Accordion (Bellow) Skirts |
Designed to cover to scissor leg assemble of the lift
table. |
|
* XL 24 Series |
$460.10 |
|
* XL 36 Series |
$727.60 |
|
* XL 48 Series |
$1,096.75 |
|
* Other Models |
Call |
|
Super Cycle |
(XL and Wide Base units only) |
|
For high cycle applications consult us for pricing. |
|
Components in base frames have been designed for high
volume repetitive lifting applications. |
Call |
2000 - 4000 LB capacity 
